Maxlite SL-48231-50

Návod k obsluze svítidla Maxlite SL-48231-50

Model: SL-48231-50

Konec produktuview

The Maxlite Shop Light SL-48231-50 is a 48-inch, 23W, 120V LED shop light designed for various indoor applications such as garages, workshops, and basements. It provides instant full brightness with a 5000K daylight color temperature and is ENERGY STAR certified for energy efficiency. This fixture features a built-in on/off pull chain, a 5ft power cord with a 120V plug, and is linkable with up to 4 units for extended lighting coverage.

Maxlite Shop Light SL-48231-50

Image: Maxlite Shop Light SL-48231-50, a white 48-inch LED fixture with a pull chain and power outlet on one end.

Bezpečnostní informace

Always read and follow all safety instructions before installation and operation. Disconnect power before servicing. This product is intended for indoor use only. Do not modify the fixture or use it for purposes other than its intended use.

  • Ensure the power supply is turned off at the circuit breaker before installation.
  • Do not install near heat sources or in wet locations.
  • Use appropriate mounting hardware for your installation surface.
  • Do not exceed the maximum linkable units (4 units).

Nastavení a instalace

The Maxlite Shop Light SL-48231-50 is designed for semi-flush ceiling mount installation. No assembly is required for the light fixture itself.

Obsah balení:

  • 1 x Maxlite Shop Light SL-48231-50
  • Montážní materiál (háky, řetězy, šrouby)
  • 5ft power cord with 120V plug

Kroky instalace:

  1. Připravte instalační prostor: Choose a suitable location for mounting, such as a garage, workshop, or basement. Ensure the surface can support the weight of the fixture (approximately 15.5 ounces).
  2. Vypnout napájení: Before beginning any electrical work, turn off the power to the installation area at the main circuit breaker.
  3. Namontujte přípravek:
    • Mark the desired mounting points on the ceiling or wall.
    • Install the provided mounting hardware (e.g., ceiling hooks or screws) securely into the marked points.
    • Hang the shop light using the installed hardware. The fixture has screw holes for flush mounting.
  4. Připojte napájení: Plug the 5ft power cord into a standard 120V electrical outlet.
  5. Link Multiple Units (Optional): If linking multiple units, connect the linking cable from the output end of one fixture to the input end of the next. Do not exceed 4 linked units.
  6. Obnovit napájení: Jakmile je instalace dokončena a všechna připojení jsou bezpečná, znovu zapněte napájení jističem.

Návod k obsluze

The Maxlite Shop Light SL-48231-50 is simple to operate using its integrated pull chain.

  • Zapínání: Gently pull the chain extending from the fixture once to turn the light on.
  • Vypínání: Gently pull the chain again to turn the light off.

The light provides instant full brightness upon activation.

Údržba

The Maxlite Shop Light SL-448231-50 requires minimal maintenance due to its LED technology.

  • Čištění: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
  • Výměna žárovky: This fixture uses integrated LED lighting and does not require bulb replacement. If the LEDs fail, the entire fixture typically needs to be replaced.
  • Inspekce: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

Odstraňování problémů

ProblémMožná příčinaŘešení
Světlo se nerozsvítí.
  • V zásuvce není proud.
  • Pull chain is in the "off" position.
  • Vadné příslušenství.
  • Check the circuit breaker and ensure the outlet is live.
  • Pull the chain to cycle the light on.
  • Požádejte o pomoc zákaznickou podporu.
Světlo bliká nebo ztmavne.
  • Uvolněné spojení.
  • svtage výkyvy.
  • Životnost svítidla se blíží ke konci.
  • Ujistěte se, že je napájecí kabel bezpečně zapojen.
  • Pokud jetagproblémy přetrvávají.
  • Kontaktujte zákaznickou podporu.
Linked lights do not work.
  • Incorrect linking connection.
  • Exceeded maximum linked units.
  • Verify linking cables are properly connected.
  • Ensure no more than 4 units are linked.

Specifikace

FunkceDetail
ZnačkaMaxlite
Číslo modeluSL-48231-50
Rozměry produktu48 cm D x 2.5 cm Š x 2 cm V
Hmotnost položky15.5 unce
Typ světelného zdrojeLED
Wattage23 wattů
svtage120 voltů
Teplota barev5000 K (denní světlo)
Kontrolní metodaZatáhněte za ovládání řetězu
Typ montážeCeiling Mount (Semi Flush)
Vnitřní/venkovní použitíKrytý
Zdroj napájeníElektrický kabel
PropojitelnýAž 4 jednotek
CertifikaceENERGY STAR certified, ETL

Záruka a podpora

Informace o záruce:

This Maxlite product comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or visit the official Maxlite website. The provided data states "Warranty Description: N/a.", indicating general warranty information is not detailed here, but a limited warranty is offered.

Zákaznická podpora:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Maxlite customer support. Visit the official Maxlite webstránky s nejaktuálnějšími kontaktními informacemi.

You can also visit the Maxlite store on Amazon for more information: Maxlite Amazon Store

© 2023 Maxlite. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.