Zavedení
This manual provides instructions for the proper setup, operation, and maintenance of your TeknoGame N64 Controller. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Model produktu: VGA-0625-R
Barva: Clear Purple
Obsah balení
Ujistěte se, že v balení jsou přítomny všechny položky:
- 1 x TeknoGame N64 Controller (Clear Purple)
- 1 x Uživatelská příručka (tento dokument)
Image: The TeknoGame N64 Controller in Clear Purple. This image displays the front view of the controller, highlighting its transparent purple casinrozložení tlačítek g a tlačítek.
Rozložení ovladače
Familiarize yourself with the buttons and controls of your TeknoGame N64 Controller:
- Analogová páčka: For precise 360-degree movement.
- D-Pad: For directional input in games that support it.
- Tlačítko: Tlačítko primární akce.
- Tlačítko B: Tlačítko sekundární akce.
- Tlačítka C (žlutá): Four directional buttons for camera control or specific in-game actions.
- Tlačítko Start: Pozastaví hry nebo potvrdí výběry.
- Tlačítko L: Left shoulder button.
- Tlačítko R: Right shoulder button.
- Spoušť Z: Located on the underside of the central handle.
- USB kabel: For connecting to your console or PC.
Pokyny pro nastavení
Connecting to Nintendo 64 Console
- Ujistěte se, že je konzole Nintendo 64 vypnutá.
- Locate an available controller port on the front of your Nintendo 64 console.
- Insert the controller's connector firmly into the chosen port.
- Power on your Nintendo 64 console. The controller is now ready for use.
Připojení k počítači se systémem Windows
- Vyhledejte volný port USB na počítači se systémem Windows.
- Plug the controller's USB cable into the USB port.
- Your Windows PC should automatically detect and install the necessary drivers. This may take a few moments.
- Once drivers are installed, the controller will be recognized as a standard gamepad. You may need to configure controller settings within your game or emulator software.
Poznámka: For optimal performance on PC, ensure your operating system is up to date. Some games or emulators may require manual button mapping.
Návod k obsluze
The TeknoGame N64 Controller functions identically to the original Nintendo 64 controller, providing a familiar gaming experience.
- Analogová páčka: Use for movement and precise control in 3D environments.
- D-Pad: Primarily used for menu navigation or specific 2D game controls.
- A & B Buttons: Perform primary and secondary actions as defined by the game.
- C Buttons: Often used for camera control, item selection, or specific character abilities.
- Tlačítko Start: Typically used to pause the game, access menus, or confirm selections.
- L & R Buttons: Shoulder buttons for various in-game actions like strafing or targeting.
- Spoušť Z: Commonly used for aiming, crouching, or other context-sensitive actions.
The controller features a rumble function for enhanced immersion in supported games. This feature is automatically activated when supported by the game or emulator.
Údržba a péče
Proper care will extend the life of your controller:
- Čištění: K otření povrchu ovladače použijte měkký, suchý hadřík. V případě odolné nečistoty lehceamphadřík vodou. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
- Skladování: Ovladač skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot. Abyste předešli poškození, neomotejte kabel těsně kolem ovladače.
- Zacházení: Nenechte ovladač upadnout ani jej nevystavujte silným nárazům. Při odpojování netahejte za kabel silou.
- Expozice tekutin: Keep the controller away from liquids. If liquid enters the controller, disconnect it immediately and allow it to dry completely before attempting to use it again.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Controller not responding on N64. | Loose connection; Console off. | Ensure the controller is firmly plugged into the N64 port. Verify the N64 console is powered on. |
| Controller not recognized on PC. | Volné připojení USB; Problém s ovladačem; Vadný port USB. | Try a different USB port. Restart your PC. Check Device Manager for driver status. Ensure your operating system is updated. |
| Buttons or analog stick not working correctly. | Dirt or debris; Software calibration issue; Physical damage. | Clean around the affected buttons/stick. For PC, check game/emulator controller settings for calibration. If on N64, try another game. |
| Rumble feature not working. | Game/emulator does not support rumble; Rumble feature disabled in settings. | Verify the game or emulator supports rumble. Check in-game or emulator settings to ensure rumble is enabled. |
If you continue to experience issues, please contact TeknoGame customer support.
Specifikace
- Model: VGA-0625-R
- Značka: TeknoGame
- Barva: Clear Purple
- Konektivita: USB (elektrický kabel)
- Typ ovladače: Gamepad
- Kompatibilní zařízení: Nintendo 64, Windows PC
- Vlastnosti: Ergonomic design, Rumble feedback
- Množství tlačítek: 10
- UPC: 722267833718
Informace o záruce
TeknoGame warrants this product against defects in materials and workmanship for a period of [Insert Warranty Period, e.g., one year] from the original date of purchase. This warranty does not cover damage caused by accident, misuse, abuse, modification, improper installation, or normal wear and tear.
To make a warranty claim, please retain your proof of purchase and contact TeknoGame customer support.
Podpora
For technical support, troubleshooting assistance, or warranty inquiries, please contact TeknoGame customer service:
- Webmísto: www.teknogame.com/support (Example link, replace with actual if available)
- E-mail: support@teknogame.com (Example email, replace with actual if available)
- Telefon: [Insert Phone Number, if available]
Please have your product model number (VGA-0625-R) and proof of purchase ready when contacting support.