DIGITUS Dual Monitor Stand User Manual

Zavedení

With the dual monitor stand from DIGITUS® you can conveniently position two monitors of sizes 15" - 32" at your desk. The quick release feature also makes it easier to install the monitors. The VESA mount is simply pushed into the corresponding mount and fixed with a screw. Easily align the monitors according to your needs and can pan, tilt or rotate the monitors themselves, e.g. for portrait monitors. You can also adjust a height adjustment of up to 40 cm. In addition, the cables of the monitors can be neatly laid through the included cable routes. Do something good for yourself and your health by adjusting the monitor optimally to your body and sitting position.

Bezpečnostní informace

Před montáží a použitím si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.

• Před montáží se ujistěte, že jsou všechny součásti přítomny a nepoškozené. Nepoužívejte, pokud některé součásti chybí nebo jsou vadné.
• Do not exceed the maximum weight capacity of 2 x 8 kg (17.6 lbs) per monitor arm.
• Ensure the desk surface is stable and capable of supporting the combined weight of the stand and monitors.
• Always use two people for lifting and positioning heavy monitors to prevent injury.
• Všechny šrouby pevně utáhněte, ale nepřetahujte je, abyste zabránili stržení závitů.
• Během montáže držte děti a domácí zvířata mimo dosah.

Co je v krabici

• Universal dual monitor stand
• Mounting material (screws, washers, tools)
• Pokyny k instalaci (tato příručka)

Obrázek: Overview of the DIGITUS Dual Monitor Stand components, including the base, central pole, monitor arms, and VESA plates.

Nastavení a instalace

Follow these steps to assemble and install your DIGITUS Dual Monitor Stand.

1. Sestavte základnu: Attach the central pole to the heavy-duty base using the provided screws. Ensure it is securely fastened to provide a stable foundation for your monitors.
2. Attach Monitor Arms: Slide the monitor arms onto the central pole. Adjust their height to your desired position and secure them with the locking mechanism.
3. Install VESA Plates: Attach the VESA mounting plates to the back of your monitors. The stand supports VESA patterns 75x75mm and 100x100mm. Use the appropriate screws for your monitor.
   

   Obrázek: Zadní view of two monitors mounted on the stand, illustrating the VESA attachment points and cable routing.

4. Montáž monitorů: Carefully slide the monitors (with VESA plates attached) onto the monitor arms' quick-release slots. Ensure they click into place and are secured with the safety screws.
5. Správa kabelů: Utilize the integrated cable clips or channels along the arms and pole to route your monitor cables neatly. This helps maintain a tidy workspace.
   

   Obrázek: Přední strana view of two monitors securely mounted on the DIGITUS stand, demonstrating a clean setup.

Provoz a seřízení

The DIGITUS Dual Monitor Stand offers flexible adjustments for optimal viewpohodlí.

• Nastavení výšky: Uvolněte třamp on the central pole to slide the monitor arms up or down. Retighten the clamp firmly once the desired height is achieved.
• Nastavení sklonu: Each monitor can be tilted up to 45 degrees (both up and down) to reduce glare and optimize viewing angles. Loosen the tilt knob behind the VESA plate, adjust, and retighten.
• Nastavení otáčení: The monitor arms can swivel horizontally to position your screens as needed.
• Rotation (Portrait/Landscape): Monitors can be rotated 360 degrees at the VESA plate, allowing for easy switching between landscape and portrait orientations.
• Správa kabelů: Use the integrated cable clips to route power and video cables along the arms and down the central pole for a clean and organized workspace.

Údržba

Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho stojanu na monitor.

• Čištění: Otřete stojan měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
• Mazání: No lubrication is typically required for this type of stand. If any joints become stiff, consult professional advice.

Odstraňování problémů

If you encounter issues with your DIGITUS Dual Monitor Stand, refer to the following common problems and solutions.

Specifikace

Záruka a podpora

This product comes with a 1-year EU spare part availability duration, indicating support for replacement parts within this period.

For further assistance, technical support, or warranty claims, please contact DIGITUS customer service through their official website or the retailer where the product was purchased. Please have your model number (DA-90401) and purchase information ready.

Pro více informací navštivte: www.digitus.info