Crivit 3D Sensor Pedometer Instruction Manual

Zavedení

This manual provides essential information for the proper use and maintenance of your Crivit 3D Sensor Pedometer, Model 307012. This device is designed to track your physical activity, including steps, distance, and calories burned, using advanced 3D sensor technology. Please read these instructions carefully before using the pedometer to ensure optimal performance and longevity.

Vlastnosti

• 3D Sensor Technology: Allows for accurate step counting regardless of placement (e.g., pocket, keychain).
• Multifunkční displej: Shows number of steps, distance, duration, speed, calorie consumption, fat burn, temperature, and current time.
• 7-Day Memory: Stores activity data for the past seven days.
• Personalizované nastavení: Individual adjustment for body height, weight, and stride length for improved accuracy.
• Podsvícený LCD displej: Poskytuje jasnou viditelnost za různých světelných podmínek.
• Attachment Clip: Pro bezpečné a pohodlné nošení.
• Baterie v ceně: Operates with one CR2032 3V battery.

Konec produktuview

Image: The Crivit 3D Sensor Pedometer, featuring a red casing, an LCD screen, and an integrated clip for attachment. The display shows numerical data.

Nastavení

1. Instalace baterie

1. Locate the battery compartment on the back of the pedometer.
2. Use a small coin or screwdriver to open the battery cover.
3. Insert one CR2032 3V battery with the positive (+) side facing up.
4. Nasaďte zpět kryt baterie a zajistěte jej.

2. Počáteční nastavení

Upon first use or after battery replacement, you will need to set your personal data for accurate tracking.

1. Nastavení času: Follow the on-screen prompts to set the current time (12-hour or 24-hour format).
2. Výběr jednotky: Choose between metric (cm/kg) or imperial (inches/lbs) units.
3. Výška: Zadejte svou výšku.
4. Hmotnost: Zadejte svou tělesnou hmotnost.
5. Délka kroku: Measure and enter your average stride length. This can be estimated by walking 10 steps, measuring the total distance, and dividing by 10.
6. Potvrďte všechna nastavení pro uložení.

Návod k obsluze

1. Zapnutí/vypnutí

• The pedometer typically powers on automatically when activity is detected or a button is pressed.
• To conserve battery, the device may enter a sleep mode after a period of inactivity. Press any button to wake it up.

2. Navigace v režimech zobrazení

Use the mode button (usually labeled 'MODE' or similar) to cycle through different display screens:

• kroky: Displays the total number of steps taken for the current day.
• Vzdálenost: Shows the total distance covered.
• Kalorie: Indicates the estimated calories burned.
• Trvání: Displays the active time.
• Rychlost: Shows your average speed.
• Spalování tuků: Displays an estimate of fat burned.
• Teplota: Ukazuje okolní teplotu.
• Čas: Zobrazuje aktuální čas.

3. Resetting Daily Data

To reset the daily activity data (steps, distance, calories) to zero, typically press and hold the 'RESET' button for a few seconds while on the main display screen. Refer to the specific button layout on your device.

4. Přístup k 7denní paměti

The pedometer stores data for the past seven days. Use the 'MEMORY' or 'HISTORY' button (if available) to review previous days' activity. The display will typically show the date and the corresponding activity data.

Údržba

Čištění

Wipe the pedometer with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Avoid submerging the pedometer in water.

Výměna baterie

When the battery indicator appears low or the display becomes dim, replace the CR2032 3V battery following the installation steps in the 'Setup' section. Dispose of used batteries responsibly according to local regulations.

Skladování

Store the pedometer in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

Odstraňování problémů

• Krokoměr nepočítá kroky:
  - Ensure the battery is correctly installed and charged.
  - Check if the device is securely attached or placed in a pocket where movement can be detected.
  - Verify that personal settings (stride length, height) are correctly entered.
• Displej je prázdný nebo tmavý:
  - Replace the battery.
  - Ensure the battery is inserted with correct polarity.
• Nepřesné údaje:
  - Re-enter your personal settings (height, weight, stride length).
  - Ensure the pedometer is not subjected to excessive shaking or vibrations that are not related to walking.
• Tlačítka nereagují:
  - Try removing and reinserting the battery to perform a soft reset.
  - Ensure the buttons are not obstructed.

Specifikace

Záruka a podpora

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Crivit webUschovejte si doklad o koupi pro případné reklamace.