Uživatelská příručka pro nástěnný držák na televizi Pipishell Full Motion

1. Úvod

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Pipishell Full Motion TV Wall Mount (Model PIMF9). Please read this manual thoroughly before beginning installation to ensure correct setup and to prevent damage or injury. This mount is designed for most 26-60 inch flat and curved TVs weighing up to 77 lbs, with VESA patterns up to 400x400mm.

2. Bezpečnostní informace

Vaše bezpečnost je prvořadá. Dodržujte prosím následující bezpečnostní pokyny:

• Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a televizoru.
• Nepřekračujte maximální nosnost 35 kg (77 liber).
• Verify your TV's VESA pattern is compatible (100x100mm to 400x400mm).
• Always use a stud finder to locate wood studs or ensure concrete/brick walls are suitable for mounting. Do not install on drywall alone.
• Follow all installation steps precisely. If unsure, consult a qualified professional.
• Během instalace držte děti a domácí zvířata mimo dosah.
• Pravidelně kontrolujte těsnost všech spojů a upevňovacích prvků.
• If you have any questions or concerns, contact Pipishell customer support.

3. Obsah balení

Please check that all parts are included before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• TV Wall Mount Assembly (Wall Plate and Articulating Arm)
• Držáky na televizi (2 kusy)
• Hardware Kit (various screws, washers, spacers for TV and wall mounting)
• Úroveň bublin
• Stahovací pásky (suchý zip)
• Návod k použití

Figure 3.1: Complete package contents of the Pipishell Full Motion TV Wall Mount.

4. Nastavení a instalace

4.1 Kontroly před instalací

Before mounting, confirm your TV and wall are compatible with the mount.

• TV Size & Weight: Fits most 26-60 inch TVs, up to 77 lbs.
• Kompatibilita VESA: Supports VESA patterns from 100x100mm to 400x400mm. Measure the horizontal and vertical distance between the mounting holes on the back of your TV.
• Typ stěny: Suitable for wood studs, concrete, and brick walls. NEINSTALUJTE pouze na sádrokarton.

Figure 4.1: VESA compatibility and maximum load capacity.

4.2 Připevnění držáků televizoru k televizoru

Carefully place your TV face down on a soft, clean surface to prevent scratches. Attach the two vertical TV brackets to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.

4.3 Mounting Wall Plate

Determine the desired height for your TV. Use a stud finder to locate the center of a wood stud for wood stud installation, or mark drill points for concrete/brick walls. Drill pilot holes and securely attach the wall plate using the provided lag bolts and washers.

Figure 4.2: Wall plate installation on a single wood stud.

4.4 Zavěšení televizoru

With assistance, carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the mount. Tighten the security screws on the bottom of the TV brackets to prevent accidental dislodgement.

4.5 Post-Installation Adjustments

The mount allows for various adjustments to achieve optimal viewing úhly.

• Nastavení výšky: The TV brackets offer 3 levels of height adjustment after installation.
• Náklon: Adjust the tilt angle from +5° to -15° to reduce glare.
• Otočný: Swivel the TV up to +/-90° for flexible viewz různých pozic.
• Rozšíření: Extend the arm out up to 19.51 inches or retract it back to 3.53 inches from the wall.
• Vyrovnání: Post-installation leveling of +/-3° allows for perfect TV placement.

Figure 4.3: Full motion capabilities: Swivel, Extend, and Tilt.

5. Ovládání držáku

Once installed, the Pipishell Full Motion TV Wall Mount provides versatile positioning for your television. Gently push or pull the TV to extend or retract the arm. Rotate the TV screen to achieve the desired swivel angle. Use the tilt adjustment knobs or levers (if applicable) to set the vertical viewúhel.

Always move the TV smoothly and avoid sudden jerks to prevent undue stress on the mount or wall.

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho televizního držáku.

• Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Inspekce: Periodically check all screws, bolts, and connections to ensure they are tight and secure. Re-tighten if necessary.
• Hnutí: If the articulating arm becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV or wall.

7. Řešení problémů

8. Specifikace

9. Záruka a zákaznická podpora

Pipishell is committed to providing high-quality products and excellent customer service. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact Pipishell customer support.

If you encounter any issues during installation or operation, or have any questions, please do not hesitate to contact our friendly US-based customer support team. Contact information can typically be found on the product packaging or the official Pipishell webmísto.

Online zdroje:

• Stáhnout uživatelskou příručku (PDF)
• Stáhnout průvodce řešením problémů (PDF)
• Visit the Official Pipishell Store on Amazon