1. Úvod
The Maxtrack 5-Way HDMI Switch (Model CS 1-5 L) is designed to connect up to five HDMI source devices to a single HDMI display. This device allows for easy switching between multiple HDMI sources such as game consoles, Blu-ray players, and streaming boxes, eliminating the need to constantly reconnect cables. It supports 4K resolution at 30Hz, Full HD, 3D, and HDCP, ensuring high-quality video and audio transmission.
2. Obsah balení
Zkontrolujte prosím balení, zda neobsahuje následující položky:
- Maxtrack 5-Way HDMI Switch (CS 1-5 L)
- IR dálkové ovládání
- Kabel IR přijímače
- Napájecí kabel USB
- Uživatelská příručka (tento dokument)

Figure 2.1: Product packaging showing the HDMI switch, remote, and cables.
3. Vlastnosti produktu
- 5 HDMI vstupy, 1 HDMI výstup: Connects up to five source devices to one display.
- 4K @ 30Hz Support: Delivers high-resolution video.
- Podpora Full HD a 3D: Compatible with various video formats.
- HDCP kompatibilní: Ensures secure content transmission.
- Vysoká šířka pásma: 340 MHz bandwidth and 10.2 Gbps data transfer speed for stable signal.
- 48-bit Deep Color: Provides vivid and deep colors.
- Uncompressed Audio Support: Compatible with formats like LPCM for optimal sound quality.
- Více možností ovládání: Switch inputs via button on the device or included IR remote control.

Obrázek 3.1: Přední strana view of the HDMI switch showing Input 1, Input 5, and Output ports.

Obrázek 3.2: Strana view of the HDMI switch showing Input 2, Input 3, and Input 4 ports.
4. Nastavení
Follow these steps to set up your Maxtrack 5-Way HDMI Switch:
- Připojení zařízení s HDMI vstupem: Connect up to five HDMI source devices (e.g., game console, Blu-ray player) to the HDMI Input ports (IN PUT 1-5) on the switch using HDMI cables.
- Připojení k displeji: Connect one end of an HDMI cable to the HDMI Output port (OUT PUT) on the switch and the other end to the HDMI input of your display (TV, monitor, projector).
- Connect IR Receiver: Plug the IR Receiver Cable into the designated IR port on the HDMI switch. Position the IR receiver in a location where it can receive signals from the remote control.
- Připojte napájení: Connect the USB Power Cable to the power input port on the HDMI switch. Plug the other end of the USB cable into a USB power source (e.g., a USB port on your TV, a USB wall adapter).
- Zapnutí: Ensure all connected devices and the display are powered on.

Figure 4.1: HDMI switch with IR receiver and USB power cable connected.

Figure 4.2: The IR receiver cable.

Figure 4.3: The USB power cable.
5. Návod k obsluze
Once the setup is complete, you can switch between your connected HDMI devices using one of two methods:
5.1 Using the Button on the Device
- Press the "SELECTED" button on the front of the HDMI switch to cycle through the available input sources (IN PUT 1, 2, 3, 4, 5).
- The LED indicators on the switch will illuminate to show which input is currently selected.
5.2 Používání infračerveného dálkového ovladače
- Point the IR remote control towards the IR receiver connected to the HDMI switch.
- Press the corresponding number button (1, 2, 3, 4, or 5) on the remote to directly select the desired HDMI input.

Figure 5.1: The IR remote control for the HDMI switch.
6. Údržba
To ensure the longevity and optimal performance of your HDMI switch, follow these maintenance guidelines:
- Čištění: K čištění vnější strany zařízení používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
- Umístění: Place the switch in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
- Zacházení: Handle the device and cables with care. Avoid bending or pulling cables excessively.
- Moc: Disconnect power when the device is not in use for extended periods.
7. Řešení problémů
If you encounter issues with your Maxtrack 5-Way HDMI Switch, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Na displeji není žádný signál. |
|
|
| Dálkové ovládání nefunguje. |
|
|
| Blikající nebo zkreslený obraz. |
|
|
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | CS 1-5 L |
| Značka | Maxtrack |
| Vstupy | 5 x HDMI |
| Výstup | 1 x HDMI |
| Podporovaná rozlišení | Up to 4K @ 30Hz, Full HD (1080p), 3D |
| Podpora HDCP | Ano |
| Hluboká barva | 48bitový |
| Šířka pásma | 340 MHz |
| Rychlost přenosu dat | 10.2 Gbps |
| Zvukové formáty | Supports uncompressed audio (e.g., LPCM) |
| Kontrolní metody | Manuální tlačítko, IR dálkové ovládání |
| Rozměry produktu | 190D x 25W x 90H millimeters (19 x 2.5 x 9 cm) |
| Hmotnost | 120 g |
| Barva | Černý |
| Typ konektoru | HDMI |
| Kompatibilní zařízení | DVD Player, Gaming Console, Television |
9. Záruka a podpora
Informace o záruce a technickou podporu naleznete v dokumentaci dodané s vaším nákupem nebo se obraťte na svého prodejce. Uschovejte si doklad o koupi pro případné reklamace.