Fenge SD315001WB Height Adjustable Standing Desk User Manual

1. Úvod

Thank you for choosing the Fenge SD315001WB Height Adjustable Standing Desk. This manual provides essential information for the safe and efficient use of your new desk converter. Please read these instructions carefully before setup and operation, and retain them for future reference.

The Fenge SD315001WB is designed to transform your existing desk into a sit-stand workstation, promoting a healthier and more dynamic work environment. It features a gas spring system for smooth height adjustments and a spacious work surface.

Figure 1: Fenge SD315001WB Height Adjustable Standing Desk with dual monitors and accessories.

2. Bezpečnostní informace

Pro zajištění bezpečného provozu a prevenci poškození dodržujte prosím následující bezpečnostní pokyny:

• Nepřekračujte maximální nosnost 15 kg (33 liber).
• Během nastavování výšky se nesmí dotýkat pohyblivých částí ani prstů, aby nedošlo k jejich sevření.
• Ujistěte se, že stolní konvertor je umístěn na stabilním a rovném povrchu.
• Distribute weight evenly on the desktop to maintain stability.
• Do not allow children to operate the desk converter without adult supervision.
• Nepokládejte horké předměty přímo na povrch bez ochrany.
• Do not attempt to disassemble or modify the gas spring mechanism.

3. Obsah balení

Po otevření balení zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené:

• Fenge SD315001WB Height Adjustable Standing Desk Converter (Main Unit)
• Návod k použití

The desk converter is largely pre-assembled, requiring minimal setup.

4. Nastavení

The Fenge SD315001WB is designed for quick and easy setup, as it comes largely pre-assembled. Follow these steps to prepare your workstation:

1. Opatrně vyjměte stolní konvertor z obalu.
2. Place the desk converter on a sturdy, flat desk or table. Ensure there is sufficient space around the unit for safe operation and adjustment.
3. Confirm that the non-slip feet on the base of the converter are securely in place to prevent movement and protect your underlying desk surface.
4. Place your monitor(s), laptop, keyboard, and mouse on the designated surfaces. Ensure cables are managed to prevent snagging during height adjustments.

Figure 2: Key dimensions and features of the Fenge SD315001WB.

5. Návod k obsluze

The Fenge SD315001WB features a gas spring system for smooth and effortless height adjustment.

5.1 Nastavení výšky

1. To raise the desk: Gently squeeze the spring-assisted handle located on the side of the desktop. While holding the handle, lift the desktop to your desired standing height. Release the handle to lock the desk in position.
2. To lower the desk: Gently squeeze the spring-assisted handle. While holding the handle, apply slight downward pressure to the desktop to lower it to your desired sitting height. Release the handle to lock the desk in position.

Always ensure that all items on the desk are stable before adjusting the height. The desk can be adjusted between 12.5 cm (minimum) and 51 cm (maximum) from your original desk surface.

Figure 3: Operating the spring-assisted handle for height adjustment.

Figure 4: Height adjustment range from minimum to maximum.

6. Údržba

Regular maintenance will help prolong the life and appearance of your Fenge standing desk converter.

• Čištění: Otřete povrchy měkkým, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the melamine veneer.
• Inspekce: Periodically check all connections and moving parts for any signs of wear or looseness. Tighten screws if necessary.
• Plynová pružina: The gas spring system is designed to be maintenance-free. Do not attempt to lubricate or disassemble it.

7. Řešení problémů

If you encounter any issues with your Fenge standing desk converter, refer to the following common problems and solutions:

• Desk is difficult to raise or lower:
  • Ensure you are pressing the handle fully.
  • Check if the weight on the desk exceeds the maximum capacity (15 kg). Remove some items if necessary.
  • Verify that no cables or objects are obstructing the movement mechanism.
• Stůl se zdá nestabilní:
  • Ujistěte se, že je stolní konvertor umístěn na rovném a stabilním povrchu.
  • Ensure weight is distributed evenly across the desktop.
  • Check that all pre-assembled components are secure.

If the problem persists, please contact Fenge customer support for assistance.

8. Specifikace

9. Záruka a podpora

Fenge products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Fenge webmísto.

If you have any questions, require technical support, or need assistance with parts, please contact Fenge customer service through the retailer where you purchased the product or via the contact information provided on the Fenge official webmísto.