Fms FMM126P

FMS Pitts V2 1400mm RC Aerobatic Biplane

Návod k použití

1. Úvod

The FMS Pitts V2 1400mm RC Aerobatic Biplane is a high-performance remote control aircraft designed for aerobatic maneuvers. Built with robust EPO foam, it features a powerful 4258 brushless motor, 50A Hobbywing ESC, and responsive 17g servos, ensuring precise control and exhilarating flight. Its design includes authentic detailing and a large battery bay for extended flight times.

FMS Pitts V2 1400mm RC Aerobatic Biplane in flight

Image: The FMS Pitts V2 1400mm RC Aerobatic Biplane in a dynamic flight pose.

2. Bezpečnostní informace

Always operate your RC aircraft in a safe and responsible manner. Failure to do so may result in injury or damage to property. Please observe the following safety guidelines:

  • Přečtěte si celý manuál: Familiarize yourself with all product features and operating instructions before use.
  • Doporučený věk: Tento produkt je doporučen pro uživatele od 14 let.
  • Oblast letu: Fly in open areas away from people, buildings, and other obstacles. Avoid flying near power lines or busy roads.
  • Povětrnostní podmínky: Nelétejte za silného větru, deště nebo jiných nepříznivých povětrnostních podmínek.
  • Předletová kontrola: Vždy proveďte důkladnou předletovou kontrolu, abyste se ujistili, že všechny komponenty jsou bezpečně upevněny a správně fungují.
  • Bezpečnost baterie: Používejte pouze doporučené baterie a nabíječky. Dodržujte všechny pokyny pro nabíjení a manipulaci s bateriemi, abyste předešli požáru nebo zranění.
  • Bezpečnost vrtule: Keep hands, face, and loose clothing away from the rotating propeller.
  • Udržujte kontrolu: If you lose control of the aircraft, immediately reduce throttle and attempt to regain control.

3. Co je v krabici

The FMS Pitts V2 1400mm PNP (Plug and Play) package includes the following components:

  • FMS Pitts V2 1400mm Airframe (fuselage, wings, tail sections)
  • 4258 Brushless Motor (pre-installed)
  • 50A Hobbywing-sourced Electronic Speed Controller (ESC) (pre-installed)
  • 17g Servos (pre-installed, 4x)
  • Vrtule
  • Podvozek
  • Vzpěry křídla
  • Small parts for assembly (screws, pushrods, etc.)

Note: This PNP version does NOT include a battery, radio transmitter, or charger.

Explodoval view of FMS Pitts V2 1400mm components

Image: All components of the FMS Pitts V2 1400mm laid out for assembly.

4. Nastavení a montáž

The FMS Pitts V2 features an ingeniously designed screw-together mechanism for swift and hassle-free assembly. Follow these steps:

  1. Rozbalte komponenty: Carefully remove all airplane components from the packaging.
  2. Připevnit křídla: Securely attach the wings to the fuselage using the provided screw-together mechanism. Ensure proper alignment.
  3. Install Wing Struts: Slide the wing struts onto the wings and secure them in place.
  4. Instalace podvozku: Připevněte podvozek k trupu.
  5. Install Propeller: Mount the propeller onto the motor shaft.
  6. Install Receiver & Speed Control: If not pre-installed, install your receiver and speed control.
  7. Připojení serv: Connect the pre-installed servos to your receiver according to your radio system's instructions.
  8. Vložte baterii: Place your 6S battery (not included) into the oversized battery compartment. Ensure it is secured to prevent shifting during flight.
  9. Těžiště (CG): Verify the aircraft's Center of Gravity (CG) is within the recommended range (refer to specifications section). Adjust battery position if necessary.
  10. Nastavení rádia: Bind your radio transmitter to the receiver and set up control throws as recommended by your radio system's manual.
FMS Pitts V2 1400mm power system components

Obrázek: Detail view of the 4258 brushless motor, 50A Hobbywing ESC, and 17g servos.

5. Návod k obsluze

The FMS Pitts V2 is designed for high-powered aerobatic performance. Its robust EPO construction ensures durability, while authentic detailing enhances the flying experience.

Předletové kontroly:

  • Ensure battery is fully charged and securely installed.
  • Check all control surfaces (ailerons, elevator, rudder) for free movement and correct direction.
  • Verify propeller is securely attached and undamaged.
  • Confirm radio signal strength and range.

Vzlet:

Position the aircraft into the wind on a clear runway. Gradually increase throttle to full, applying slight up-elevator as needed for a smooth lift-off. The powerful motor will provide ample thrust for quick takeoffs.

Let:

The Pitts V2 is highly maneuverable, capable of a wide range of aerobatic stunts. Its responsive 17g servos allow for precise control. Practice basic maneuvers before attempting advanced aerobatics. The large capacity battery bay accommodates powerful 6S packs for extended flight times.

Přistání:

Approach the runway into the wind. Gradually reduce throttle and maintain a controlled descent. Apply slight up-elevator just before touchdown for a soft landing. The robust landing gear is designed to handle various landing conditions.

FMS Pitts V2 1400mm performing an aerobatic maneuverFMS Pitts V2 1400mm in a high-alpha passFMS Pitts V2 1400mm flying invertedFMS Pitts V2 1400mm in a knife-edge flight

Images: Various dynamic flight shots of the FMS Pitts V2 1400mm RC Biplane.

Oficiální video produktu:

Video: FMS 1400mm Pitts V2 - Flight and Features. This video showcases the aircraft's flight capabilities and key features.

6. Údržba

Regular maintenance will ensure the longevity and optimal performance of your FMS Pitts V2.

  • Čištění: After each flight, wipe down the aircraft with a soft, dry cloth to remove dirt, dust, or moisture.
  • Inspekce: Regularly inspect the airframe for any cracks, dents, or damage to the EPO foam. Check control surfaces, hinges, and pushrods for wear or looseness.
  • Vrtule: Inspect the propeller for nicks, cracks, or bends. Replace if damaged to ensure balanced flight and prevent motor strain.
  • Motor a regulátor otáček: Ensure the motor spins freely and the ESC connections are secure. Avoid overheating the motor and ESC.
  • Serva: Check servos for smooth operation and ensure they are securely mounted.
  • Péče o baterie: Store batteries in a cool, dry place. Do not overcharge or over-discharge LiPo batteries.

7. Řešení problémů

If you encounter issues with your FMS Pitts V2, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Letadlo nereaguje na ovládací prvkyUnbound receiver, low transmitter/receiver battery, damaged wiring.Re-bind receiver, check battery levels, inspect and repair wiring.
Motor se netočíDisconnected motor/ESC, faulty ESC, low battery.Check all connections, test ESC, charge/replace battery.
Poor flight performance/unstableIncorrect CG, control surface trim, damaged airframe.Adjust CG, trim control surfaces, inspect and repair airframe.
Krátké doby letuBaterie není plně nabitá, stará/poškozená baterie.Ensure full charge, replace old batteries.

8. Specifikace

FunkceHodnota
Rozměry produktu47.5 x 19.5 x 12.5 palce
Hmotnost položky14 libry
ASINB089Q56CGH
Číslo modelu položkyFMM126P
Výrobcem doporučený věk14 let a více
VýrobceFMS model
FMS Pitts V2 1400mm specifications table

Image: Detailed specifications table for the FMS Pitts V2 1400mm.

9. Záruka a podpora

FMS is committed to providing quality products and support. For any inquiries or issues, please refer to the following:

  • Zásady vrácení: This product is subject to a 30-day refund/replacement return policy.
  • Poškozený balíček: If your package was damaged during shipping, please contact FMS support immediately. Keep all packing material and original boxes. Provide photos of the damaged product and box.
  • Wrong Product Received: If you received the wrong product, contact FMS support. Keep all packing material and original boxes. The incorrect item must be returned new and unused (FMS will cover return shipping).
  • Výrobce: FMS model
  • Značková prodejna: Navštivte FMS Store on Amazon pro více produktů a podporu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.