EASYGUARD EC010 PKE Car Alarm System User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of the EASYGUARD EC010 PKE Car Alarm System. This system is designed to enhance vehicle security and convenience with features such as passive keyless entry, remote engine start, and push button start/stop functionality.

Important Note: Professional installation is required for this product. Improper installation may lead to vehicle damage or system malfunction. Please ensure you can arrange for professional installation before purchasing.

2. Bezpečnostní informace

Ensure the vehicle's battery is disconnected before beginning any installation work to prevent electrical shorts or damage.
Always follow local regulations and laws regarding vehicle modifications and alarm systems.
Do not attempt to install this system if you are not experienced with automotive electrical systems.
Chraňte všechny součásti před vlhkostí a extrémními teplotami.
If your vehicle has a chip immobilizer in its factory OEM key fob, an extra bypass module (e.g., ASIN: B00MEHBVIC or B07NSLPBG7) je vyžadováno.
The steering lock must be unlocked, released, or removed during installation.
This system is compatible with most DC12V petrol and diesel vehicles. It is not compatible with cars equipped with an OEM push start button or vehicles with a CAN BUS system.
For diesel cars with an engine starting time over 12 seconds, an extra timer delay switch may be required.

3. Obsah balení

The EASYGUARD EC010 system typically includes the following components:

Řídicí modul
Key Fobs/Transmitters (2 units)
Stiskněte tlačítko Start
20-pin Main Wire Harness
6-pin Ignition Wire Harness
PKE Antennas (2 units)
Alarmová anténa
Snímač otřesů
LED indikátor
Resetovat spínač
Relé
User Manual & Wiring Diagram

EASYGUARD EC010 PKE Car Alarm System Components — Obrázek 3.1: Přesview of EASYGUARD EC010 PKE Car Alarm System components. This image displays the main control unit, two key fobs, the push start button, various wiring harnesses, PKE antennas, an alarm antenna, a shock sensor, and an LED indicator.

EASYGUARD EC010 PKE Car Alarm System Detailed Components — Obrázek 3.2: Detailní view of EASYGUARD EC010 components, including remote controls, control module, push button, shock sensor, 20-pin wire harness, LED indicator, PKE antennas, alarm antenna, and 6-pin ignition wire harness.

EASYGUARD EC010 Control Module Connections — Figure 3.3: Close-up of the EASYGUARD EC010 control module, showing the various connection ports for the programming switch, 20-pin wire harness, shock sensor, push start button, PKE antennas, and alarm antenna. Note: Microwave sensor port is optional and may not be present on all versions.

4. Konec produktuview a funkce

The EASYGUARD EC010 system offers a range of features for vehicle security and convenience:

Push Button Start/Stop: Start or stop your vehicle's engine with a simple press of a button.
Passive Keyless Entry (PKE): Automatically locks/unlocks car doors as you approach or walk away from the vehicle with the key fob.
Remote Engine Start/Stop: Start or stop the engine remotely using the key fob, allowing for pre-cooling or pre-warming of the vehicle.
Manual Arm/Lock & Disarm/Unlock: Standard remote control functions for locking and unlocking doors.
Mute/Audible Alarm: Configurable alarm sound settings.
Dálkové odemčení zavazadlového prostoru: Open the trunk remotely (may require an extra trunk release solenoid kit).
Panický režim: Activate the alarm for emergency situations.
Režim obsluhy: Temporarily disable certain alarm features for service or valet parking.
Anti-Hijacking: Security feature to prevent vehicle theft during a carjacking.
Central Door Locking Automation: Automatically locks doors when driving and unlocks when the engine is turned off (can be enabled or disabled).
Varování před šokem: Alerts to impacts or disturbances to the vehicle.
Nouzové přepsání: Manual method to disarm the system in case of remote control loss or malfunction.
Automatic Window Closing: Optional feature, requires an extra window closer module (e.g., 4-door window closer ASIN: B00N3RKA8E).

EASYGUARD EC010 Main Features Overview — Figure 4.1: Visual representation of the main features of the EASYGUARD EC010 system, including Passive Keyless Entry (PKE), Remote Engine Start, Push Start Button, and Shock Alarm Warning.

5. Nastavení a instalace

Installation of the EASYGUARD EC010 system requires expertise in automotive electrical systems. It is strongly recommended to have the system installed by a qualified professional.

5.1 Obecné poznámky k instalaci

Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
Route wiring away from moving parts, heat sources, and sharp edges.
If your vehicle has a factory immobilizer, a bypass module is essential for remote start and push-button start functionality.
The steering lock must be disengaged or removed to allow the push-button start to function correctly.

5.2 PKE Antenna Installation

Proper placement of the PKE antennas is crucial for optimal passive keyless entry performance. Refer to the following video for guidance on antenna installation:

Video 5.1: PKE Antenna Installation Guide. This video demonstrates the recommended placement for the PKE antennas within the vehicle to ensure reliable passive keyless entry functionality.

6. Návod k obsluze

6.1 Key Fob Functions

The key fob provides control over various alarm and vehicle functions:

EASYGUARD EC010 Key Fob Button Functions — Figure 6.1: Illustration of the key fob buttons and their corresponding functions: LED indicator, Arm/Panic mode, Start button/Trunk release, and Disarm. Note: The spare key blade place is shown, but the default unit does not equip with a spare key blade.

Zámek/paže: Press the lock button once to arm the alarm and lock the doors.
Odemknout/deaktivovat: Press the unlock button once to disarm the alarm and unlock the doors.
Remote Engine Start/Stop: Keep pressing the start button (often the trunk release button) for approximately 3 seconds to remotely start or stop the engine.

6.2 Passive Keyless Entry (PKE)

With PKE enabled, the system automatically manages door locks based on your proximity to the vehicle while carrying the key fob:

Automatic Unlock: The car doors will automatically unlock when you approach the vehicle within 3-6 feet (approximately 1-2 meters).
Automatický zámek: The car doors will automatically lock when you walk away from the car, typically within 6-9 feet (approximately 2-3 meters).

EASYGUARD EC010 PKE Passive Keyless Entry Range — Figure 6.2: Diagram illustrating the Passive Keyless Entry (PKE) functionality, showing automatic unlocking when approaching the vehicle (3-6 feet) and automatic locking when walking away (6-9 feet) with the key fob.

See the following video for a demonstration of PKE and remote start functions:

Video 6.1: Demonstration of PKE and Remote Start Functions. This video illustrates how the passive keyless entry system automatically locks and unlocks the vehicle, and how to use the remote start feature.

6.3 Push Button Start/Stop

The push button allows for keyless ignition and engine control:

EASYGUARD EC010 Push Start Button Details — Figure 6.3: Close-up of the push start/stop button, indicating its dimensions and LED color options (blue and red).

Režim příslušenství: Press the push button once without pressing the brake pedal to activate accessory mode (radio, etc.).
Zapalování zapnuto: Press the push button a second time without pressing the brake pedal to turn on the ignition (AC, dashboard lights).
Startování motoru: Press the brake pedal and then press the push button to start the engine.
Engine Stop: Press the brake pedal and then press the push button to stop the engine.

6.4 Touch Password Entry (Optional)

Some versions of the system may include a touch password entry feature, allowing you to unlock/lock the vehicle without the key fob by entering a pre-set code on a discreet pad on the windshield.

Pro komplexní přesview of the EC010's features, including PKE, remote start, and push-button operation, refer to the following video:

Video 6.2: EASYGUARD EC010 Product Overview. This video provides a general demonstration of the EC010 system's key features, including remote start, passive keyless entry, and push-button engine start/stop.

7. Údržba

Key Fob Batteries: The key fobs require 2 CR2 batteries (included). Replace batteries when the LED indicator on the fob dims or range decreases.
Kontrola systému: Pravidelně kontrolujte všechna kabelová spojení, zda nejsou uvolněná nebo korozivá.
Čištění: Keep the control module and other components clean and free from dust and debris. Use a soft, dry cloth for cleaning.

8. Řešení problémů

Problém	Možná příčina	Řešení
PKE sensors occasionally lose signal.	Interference from external sources (e.g., strong electromagnetic fields, other wireless devices).	Move away from sources of interference. Ensure PKE antennas are correctly installed and not obstructed. If the issue persists, contact technical support.
Remote start not functioning.	Vehicle immobilizer not bypassed; incorrect wiring; low key fob battery.	Verify bypass module installation (if applicable). Check all wiring connections. Replace key fob batteries. Ensure vehicle is in park and doors are closed.
Push button start not working.	Steering lock engaged; incorrect wiring; brake pedal not pressed.	Ensure steering lock is disengaged/removed. Verify wiring. Confirm brake pedal is fully depressed.
Alarm se spustí nečekaně.	Shock sensor sensitivity too high; faulty sensor; loose wiring.	Adjust shock sensor sensitivity. Inspect sensor and wiring. Contact technical support if the issue continues.

9. Specifikace

Číslo modelu: EC010
Napájení: DC 12V
Kompatibilní zařízení: Most DC12V cars (excluding those with OEM push start button and CAN BUS system)
Noise Level (Siren): 110 decibelů
Key Fob Batteries: 2 baterie CR2 (součástí balení)
Hmotnost položky: 2.56 libry
Rozměry produktu: 9.45 x 6.3 x 3.94 palce
Výrobce: ieasyguard.com

10. Záruka a podpora

For technical support or any inquiries regarding your EASYGUARD EC010 system, please contact the manufacturer or your point of purchase. It is recommended to review the user manual and installation guide thoroughly before purchasing to ensure compatibility and understanding of the product's requirements.

Please note that installation services are not provided by the manufacturer, and professional installation is required to ensure proper functionality and to maintain any applicable warranty.

EASYGUARD EC010