1. Úvod
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Güde Airpower 275/8/50 Silent Compressor. Please read these instructions carefully before initial use and keep them for future reference. This compressor is designed for generating compressed air for various applications, including tire inflation and powering pneumatic tools.
The Güde Airpower 275/8/50 is an oil-free, twin-piston compressor with a 50-liter tank, operating at 230V. Its silent design ensures a low noise level during operation.
2. Bezpečnostní informace
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury or damage to the equipment.
- Elektrická bezpečnost: Ensure the compressor is connected to a properly grounded 230V power supply. Do not operate in wet conditions or with damaged cables.
- Bezpečnost při tlaku: Never exceed the maximum operating pressure of the compressor or the connected tools. Always wear appropriate eye protection.
- Větrání: Kompresor provozujte v dobře větraném prostoru, abyste zabránili jeho přehřátí.
- Údržba: Před prováděním jakékoli údržby nebo oprav odpojte napájení.
- Děti a přihlížející: Udržujte děti a nepovolané osoby v dostatečné vzdálenosti od pracujícího kompresoru.
3. Nastavení a montáž
Before operating the compressor, ensure all components are correctly assembled and inspected.
3.1 Vybalení a kontrola
Carefully remove the compressor from its packaging. Inspect for any signs of damage during transit. Report any damage to your supplier immediately.
3.2 Upevnění koleček a rukojeti
The compressor is equipped with wheels and a handle for portability. Attach the large wheels to the rear axle and the smaller swivel casters to the front support bracket. Secure the handle firmly to the main unit.
Figure 1: The Güde Airpower 275/8/50 Silent Compressor, showing the overall assembly with wheels and handle.
Obrázek 2: Zadní view of the compressor, highlighting the sturdy handle and control panel with pressure gauges.
Obrázek 3: Detail view of the robust wheels, designed for easy movement of the compressor.
3.3 Elektrické připojení
Connect the compressor to a standard 230V, 50Hz electrical outlet. Ensure the circuit can handle the compressor's 1500W power consumption.
4. Návod k obsluze
Follow these steps for safe and effective operation of your compressor.
4.1 Spuštění kompresoru
- Ensure the main power switch is in the 'OFF' position.
- Zapojte napájecí kabel do vhodné elektrické zásuvky.
- Turn the main power switch to the 'ON' position. The compressor will start to build pressure in the tank.
- The compressor will automatically shut off once the maximum pressure is reached and restart when the pressure drops below a set threshold.
4.2 Nastavení výstupního tlaku
Use the pressure regulator knob located near the output quick-connect fitting to adjust the desired working pressure. The output pressure gauge will display the regulated pressure.
Figure 4: Detail of the twin-piston pump heads and air lines, showing the robust construction and connections.
4.3 Připojení pneumatického nářadí
Connect your pneumatic tools or accessories to the quick-connect fitting on the compressor. Ensure the connection is secure before operating the tool.
Figure 5: A user demonstrating tire inflation using the Güde Airpower compressor, highlighting its practical application.
4.4 Vypnutí
When finished, turn the main power switch to the 'OFF' position. Disconnect the power cord from the outlet. Release any remaining pressure from the tank by opening the drain valve or using an air tool until the pressure gauge reads zero.
5. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho kompresoru.
5.1 Draining Condensation
Condensation will accumulate in the air tank. It is crucial to drain this moisture daily or after each use to prevent corrosion and maintain air quality. Locate the drain valve at the bottom of the tank, open it to release water, and then close it securely.
Figure 6: Close-up of the drain valve located at the bottom of the compressor tank, used for releasing condensed moisture.
5.2 Čištění
Keep the compressor clean and free from dust and debris. Use a dry cloth to wipe down the exterior. Do not use solvents or abrasive cleaners.
5.3 Oil-Free Design
This compressor features an oil-free design, eliminating the need for oil changes or oil level checks. This simplifies maintenance and provides cleaner air output.
6. Řešení problémů
Běžné problémy a jejich řešení naleznete v tabulce níže.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Kompresor se nespustí | Žádné napájení Aktivováno tepelné přetížení | Zkontrolujte připojení napájení a zásuvku Allow compressor to cool down, then reset thermal overload switch (if present) |
| Nízký výstupní tlak | Pressure regulator set too low Úniky vzduchu v přípojkách | Nastavte regulátor tlaku Check all hose connections and fittings for leaks |
| Kompresor běží nepřetržitě | Air leaks in tank or connections Porucha tlakového spínače | Inspect tank and connections for leaks Požádejte o pomoc zákaznickou podporu |
| Nadměrný hluk nebo vibrace | Uvolněné součásti Jednotka není na stabilním povrchu | Zkontrolujte a utáhněte všechny upevňovací prvky Place compressor on a firm, level surface |
7. Specifikace
Key technical data for the Güde Airpower 275/8/50 Silent Compressor:
| Funkce | Hodnota |
|---|---|
| Číslo modelu | 50138 |
| svtage | 230 voltů |
| Moc | 1500 Watts (1.5 Kilowatt) |
| Proud vzduchu | 275 litrů za minutu |
| Kapacita nádrže | 50 litru |
| Hladina hluku (LPA) | 61 decibelů |
| Rozměry (D x Š x V) | 72 x 41.5 x 62.5 cm |
| Hmotnost | 42.6 kg |
| Speciální funkce | Oil-free, Silent Operation |
Figure 7: Dimensional diagram of the compressor, indicating length, width, and height measurements.
Figure 8: A visual comparison of the compressor's 61 dB(A) noise level against other common sounds, illustrating its quiet operation.
8. Záruka
This Güde compressor is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims. For detailed warranty information, refer to the documentation provided with your purchase or contact Güde customer support.
9. Podpora
For technical assistance, spare parts, or further inquiries regarding your Güde Airpower 275/8/50 Silent Compressor, please contact your authorized Güde dealer or visit the official Güde webstránky s kontaktními údaji zákaznického servisu.