EASYGUARD EC002PP-T2-A0410 User Manual

Konec produktuview

The EASYGUARD EC002PP-T2-A0410 is a sophisticated CAN Bus PKE (Passive Keyless Entry) remote starter system designed to upgrade key-start gas engine Toyota vehicles to a modern push-button start system. This kit enhances vehicle convenience and security with features such as passive keyless entry, remote engine start, and touch password entry. It includes a bypass module and is pre-programmed for ease of use.

Figure 1: Complete EASYGUARD EC002PP-T2-A0410 Kit Components.

Kompatibilita

This EC002PP-T2-A0410 PKE kit is specifically designed for standard key start gas engine Toyota vehicles. It is crucial to verify your vehicle's compatibility before purchasing a pokus o instalaci.

Figure 2: Compatible Vehicle Models and Years.

Kompatibilní modely:

• Corolla 2009-2013
• FJ Cruiser/Land Cruiser/Prado 2010-2017
• Alphard 2010-2017
• RAV4 2009-2013
• Sienna 2010-2017
• 4Runner 2013-2017
• Sequoia 2010-2017

This item will not work on vehicles not listed above.

Nastavení a instalace

The EASYGUARD EC002PP-T2-A0410 system features a semi plug-and-play design with an OBD2 connector and T-harness, minimizing damage to the original car circuit. However, some wiring connections are still required. Professional installation by a trained staff or alarm installer is highly recommended, especially if you lack experience with car alarm installations or dashboard panel removal.

Klíčové poznámky k instalaci:

• The steering wheel lock must be unlocked or removed during installation.
• A bypass module is included in the kit.
• The system is CAN BUS compatible with pre-loaded firmware.

Antenna Installation Guide:

Proper placement of the PKE antennas is crucial for optimal performance of the passive keyless entry system. Refer to the video below for visual guidance on antenna installation points.

Kabelové svazky:

The kit includes CAN BUS wire harnesses specifically designed for Toyota vehicles. Ensure you provide your car model and year to receive the correct harness for your vehicle.

Figure 3: CAN BUS Wire Harnesses for Toyota.

Návod k obsluze

Klíčové vlastnosti:

• Tlačítko start/stop
• PKE (Passive Keyless Entry)
• Manual arm/lock & disarm/unlock
• Mute/audible alarm
• Vzdálené uvolnění kufru
• Panický režim
• Valet mode on/off setting
• Dálkové startování/zastavení motoru
• Automatizace centrálního zamykání dveří
• Touch password entry to lock or unlock the car
• Password revise & reset

Push Button Start/Stop:

Once installed, your vehicle will be equipped with a convenient push-button ignition system. Simply press the button to start or stop the engine.

Figure 4: Engine Start/Stop Button Operation.

Passive Keyless Entry (PKE):

The PKE feature automatically locks and unlocks your car doors as you approach or walk away with the key fob. The system detects the key fob within a specified range.

• Automatically unlock car door when you approach the vehicle in 3-6 feet with key fob.
• Automatically lock car door when you walk away from the car in 6-9 feet with key fob.

Figure 5: Passive Keyless Entry (PKE) Functionality.

Vzdálený start motoru:

Utilize the remote engine start feature to pre-cool your car in hot weather or pre-warm it in cold conditions, enhancing comfort before entering the vehicle.

Figure 6: Remote Engine Start Benefit.

Funkce klíčenky:

The included key fobs provide convenient control over your vehicle's security and starting functions. Each button has a specific purpose:

Figure 7: Key Fob Button Functions.

• LED indikátor: Provides visual feedback on the fob's status.
• Arm/Panic mode: Locks the vehicle and activates the alarm, or triggers a panic alarm.
• Odzbrojit: Unlocks the vehicle and deactivates the alarm.
• Start button/Trunk release: Initiates remote engine start or opens the trunk.

Figure 8: Key Fob Design.

Údržba

The EASYGUARD EC002PP-T2-A0410 system is designed for low maintenance. Ensure the key fob batteries (2 CR2 batteries) are replaced when indicated to maintain optimal performance. Keep the main control unit and wiring free from moisture and extreme temperatures.

Odstraňování problémů

If you encounter any issues during installation or operation, please refer to the following common solutions or contact our technical support.

Běžné problémy a řešení:

• System not responding: Check key fob battery levels. Ensure all wiring connections are secure and properly installed.
• Remote start not working: Verify that the vehicle is in park and all doors are closed. Ensure the steering wheel lock has been properly addressed during installation.
• PKE range issues: Confirm that the PKE antennas are correctly installed and not obstructed. Replace key fob batteries if they are low.
• "Plug & Play" discrepancy: While advertised as semi plug & play, this system requires some wire connections. This is normal and not a defect.

Specifikace

Záruka a podpora

For any installation assistance or technical support, please contact EASYGUARD directly. The product is pre-programmed, so no additional programming is typically required for the main functions.

Additional protection plans are available for purchase separately:

• Dvouletý ochranný plán
• Dvouletý ochranný plán
• Kompletní ochrana: Jeden plán pokrývá všechny způsobilé minulé i budoucí nákupy

Můžete také navštívit EASYGUARD Store for more information and product availability.