Důležité bezpečnostní informace
Před zahájením instalace si prosím přečtěte a pochopte všechny pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným zraněním, která mohou být smrtelná nebo způsobit škody na majetku.
- Před instalací nebo údržbou vždy odpojte napájení hlavním jističem.
- Pokud si nejste jisti postupem instalace, poraďte se s kvalifikovaným elektrikářem.
- Používejte pouze žárovky uvedeného typu a výkonu.tage.
- Nepřekračujte maximální watttage for the fixture (60W per bulb, 240W total).
- Ujistěte se, že všechna elektrická připojení jsou bezpečná a splňují místní předpisy.
- This fixture is designed for indoor use only and is not water-resistant.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- VONLUCE 4-Light Bathroom Vanity Light Fixture (Model BVL-GLW4)
- Clear Glass Shades (4 pieces)
- Sada montážního hardwaru
- Návod k použití
Poznámka: Žárovky s paticí E26 nejsou součástí balení a je nutné je zakoupit samostatně.
Specifikace produktu
| Značka | VONLUCE |
| Číslo modelu | BVL-GLW4 |
| Barva | Černý |
| Materiál | Sklo, kov |
| Styl | Moderní |
| Rozměry produktu | 30 cm D x 10 cm Š x 6 cm V |
| Počet světel | 4 |
| Základna žárovky | E26 |
| Max Wattage (na žárovku) | 60 wattů |
| Max Wattage (celkem) | 240 wattů |
| Zdroj napájení | Pevně zapojené |
| Typ instalace | Držák na zeď |
| Speciální funkce | Anti-Rust, Dimmable |
| svtage | 120 voltů |
Figure 1: Product Dimensions (29 inches wide, 10.6 inches high, 5.1 inches deep for shades).
Pokyny k instalaci
This fixture is designed for easy hardwired installation. Follow these steps carefully.
1. Předinstalace
- Vypněte napájení jističem.
- Unpack all parts and inspect for damage.
- Ensure you have all necessary tools (screwdriver, wire strippers, electrical tape, etc.).
2. Montáž svítidla
- Připevněte montážní držák ke spojovací krabici pomocí dodaných šroubů.
- Connect the fixture's ground wire to the house ground wire (usually bare copper or green) using a wire nut.
- Connect the fixture's white wire to the house white (neutral) wire using a wire nut.
- Connect the fixture's black wire to the house black (live) wire using a wire nut.
- Opatrně zasuňte všechny vodiče do spojovací krabice.
- Align the fixture's backplate with the mounting bracket and secure it with the decorative nuts or screws.
Figure 2: Detail of the fixture's backplate and design.
3. Attaching Glass Shades and Bulbs
- Carefully screw the clear glass shades onto the lamp držáky. Nepřetahujte.
- Insert E26 base bulbs (max 60W each, not included) into the sockets.
Figure 3: Clear glass shades for even light diffusion.
Operating Your Light Fixture
Once installed, restore power at the circuit breaker. The light fixture operates via your standard wall switch. This fixture is dimmable when used with compatible dimmable E26 bulbs and a dimmer switch.
Figure 4: Light fixture in off and on states.
Video 1: Oficiální produkt skončilview showcasing the VONLUCE 4-Light Bathroom Vanity Light in a bathroom setting, highlighting its modern design and lighting capabilities.
Údržba a péče
- Čištění: Always turn off power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass.
- Výměna žárovky: Ensure power is off. Allow bulbs to cool before touching. Unscrew the old bulb and replace it with a new E26 base bulb (max 60W).
- Inspekce: Pravidelně kontrolujte těsnost všech spojů a montážních prvků.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | 1. Napájení je vypnuto. 2. Uvolněné kabelové spojení. 3. Vadná žárovka. |
1. Check circuit breaker and wall switch. 2. Turn off power, check wiring connections. 3. Vyměňte žárovku. |
| Blikající světlo. | 1. Uvolněná žárovka. 2. Nekompatibilní stmívač/žárovka. 3. Uvolněné zapojení. |
1. Utáhněte žárovku. 2. Ujistěte se, že stmívač a žárovky jsou kompatibilní. 3. Turn off power, check wiring connections. |
| Fixture is hot to touch. | Žárovka wattage příliš vysoká. | Replace bulbs with lower wattage, ensuring they do not exceed 60W per bulb. |
Záruka a podpora
This VONLUCE product comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your purchase or contact VONLUCE customer service.
For further assistance, please visit the official VONLUCE store: VONLUCE Store on Amazon.