1. Úvod
This manual provides essential instructions for the assembly, operation, and maintenance of your Haus Bar Stool. Please read this manual thoroughly before assembly and retain it for future reference. Proper assembly and care will ensure the longevity and safety of your product.
2. Bezpečnostní informace
Vždy dodržujte tyto bezpečnostní pokyny, abyste předešli zranění nebo poškození produktu:
- Před zahájením montáže se ujistěte, že jsou všechny součásti přítomny a nepoškozené.
- Assemble the stool on a soft, clean surface to prevent scratching.
- Tighten all screws and bolts securely. Periodically check and re-tighten fasteners.
- Nestůjte na stoličku. Je určena pouze k sezení.
- Nepřekračujte maximální nosnost (viz specifikace).
- Udržujte děti mimo dosah montážního prostoru. Malé části mohou představovat nebezpečí udušení.
- Avoid exposing the stool to direct sunlight or extreme temperatures to prevent material degradation.
3. Obsah balení
Verify that all parts listed below are included in your package. If any parts are missing or damaged, contact customer support immediately.
- A. Padded Seat (1)
- B. Leg Frame Assembly (1)
- C. Sada hardwaru (šrouby, podložky, imbusový klíč) (1)
Obrázek 1: Přední strana view of the assembled Haus Bar Stool. This image displays the overall design, including the dark gray padded seat and the wooden leg structure.
Obrázek 2: Boční profíkfile of the Haus Bar Stool. This view highlights the ergonomic curve of the seat and backrest, as well as the sturdy construction of the wooden legs.
4. Nastavení a montáž
Pro správnou montáž postupujte pečlivě podle následujících kroků:
- Rozbalte komponenty: Carefully remove all parts from the packaging. Place them on a soft, flat surface to prevent damage.
- Připevnění sedadla k rámu: Align the pre-drilled holes on the underside of the padded seat (A) with the holes on the top of the leg frame assembly (B).
- Zajistěte pomocí šroubů: Insert the provided screws from the hardware pack (C) through the frame and into the seat. Hand-tighten all screws initially.
- Konečné utažení: Once all screws are in place, use the Allen wrench (C) to fully tighten all fasteners. Do not overtighten.
- Kontrola stability: Gently rock the stool to ensure it is stable. If it wobbles, check that all screws are evenly tightened.
Figure 3: Detail of the padded seat. This image shows the texture and stitching of the dark gray upholstery, which is a key component for assembly.
5. Provoz (Použití)
The Haus Bar Stool is designed for comfortable seating at bar-height surfaces. Ensure the stool is placed on a flat, stable surface before use. Sit gently and distribute your weight evenly. Avoid sudden movements or leaning excessively to one side.
6. Údržba a péče
- Čištění sedadla: For the dark gray padded seat, wipe with a soft, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or harsh chemicals.
- Cleaning the Wood Frame: Dust the walnut-stained oak legs with a soft, dry cloth. For deeper cleaning, use a wood-specific cleaner and follow its instructions. Avoid excessive moisture.
- Kontrola upevňovacích prvků: Periodically (every 3-6 months) check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
- Vyhněte se přímému slunečnímu záření: Prolonged exposure to direct sunlight can cause fading or damage to both the upholstery and wood finish.
- Vyhněte se nadměrné vlhkosti: Protect the stool from spills and high humidity, which can damage the wood and upholstery.
Figure 4: Connection point detail. This image illustrates how the padded seat meets the wooden frame, important for understanding cleaning and maintenance of this joint.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stolička se po sestavení kymácí. | Šrouby nejsou utaženy rovnoměrně nebo úplně. | Place the stool on a flat surface. Loosen all screws slightly, then re-tighten them evenly and firmly. |
| Scratches on the wood frame. | Impact or abrasion during use or assembly. | Minor scratches can be touched up with a wood repair marker or polish matching the walnut tone. |
| Upholstery appears stained or dirty. | Hromadění nečistot nebo rozlitých tekutin. | Vyčistěte měkkým, damp cloth and mild soap solution. Wipe dry immediately. Avoid harsh chemicals. |
8. Specifikace
- Model: Banco Alto para Barra
- Značka: Haus
- Barva: Dark Gray (seat), Walnut Tone (legs)
- Materiál rámu: Walnut Wood (Encino Tono Nogal - Oak with Walnut Stain)
- Materiál sedadla: Polstrované čalounění
- Styl: Modern with rustic touches
- ASIN: B087N7THFJ
- Rozměry: (Specific dimensions not provided in source, placeholder for typical manual) Approximately 40 cm (W) x 45 cm (D) x 95 cm (H) - This is an estimation, actual dimensions may vary.
- Nosnost: (Not provided in source, placeholder for typical manual) Up to 120 kg (265 lbs) - This is an estimation, actual capacity may vary.
Obrázek 5: Zadní view of the bar stool. This image provides a perspective of the backrest and the stability of the leg design from behind.
9. Záruka a podpora
Haus products are manufactured with quality and durability in mind. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Haus website. If you encounter any issues or require assistance, please contact Haus customer support with your product model and purchase details.
Kontaktní údaje: (Not provided in source, typically found on product packaging or official webweb)