Maxxima 755183179899

Maxxima 8-inch Recessed Commercial LED Downlight User Manual

Model: 755183179899

Zavedení

This manual provides instructions for the installation, operation, and maintenance of the Maxxima 8-inch Recessed Commercial LED Downlight. This fixture features selectable color temperature (CCT) and wattage, offering versatility for various lighting needs. It is designed for commercial applications and is 0-10V dimmable, Energy Star certified, and UL listed.

Bezpečnostní informace

VAROVÁNÍ: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

  • Před instalací si přečtěte všechny pokyny.
  • Do not install in locations where the operating temperature exceeds -20°C to 40°C (-4°F to 104°F).
  • Vhodné pro damp umístění.
  • IC rating: Vhodné pro přímý kontakt s izolací.
  • Ujistěte se, že všechna elektrická připojení jsou bezpečná a splňují místní předpisy a vyhlášky.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

  • 1x Maxxima 8-inch Recessed Commercial LED Downlight
  • Pre-wired flexible metal conduit (whip)
  • Ceiling tension spring clips (pre-attached)
  • Drátěné matice
  • Safety cable (pre-attached)

Specifikace

FunkceSpecifikace
Číslo modelu755183179899
Vstupní objemtage110-277 VAC, 50 / 60 Hz
WattageVolitelné: 12W / 20W / 30W
JasUp to 2400 Lumens (depending on wattage výběr)
Teplota barev (CCT)Selectable: 2700K / 3000K / 3500K / 4000K / 5000K
Stmívání0-10V Dimming (20% to 100% range)
Rozměry10.2" Diameter x 4.6" Depth
Délka biče18.5"
Délka bezpečnostního kabelu19.5"
Provozní teplota-20 °C až 40 °C
CertifikaceEnergy Star, UL, IC Rated
MateriálKov
Hmotnost1.83 libry

Nastavení a instalace

Než začnete: Ensure power is disconnected at the circuit breaker. This fixture is designed for flush mount installation into standard ceilings.

  1. Prepare Ceiling Opening: Create an appropriate size opening in the ceiling for the 8-inch downlight. Refer to local building codes for exact requirements.
  2. Připojení kabeláže:
    • Connect the black wire from the fixture's pre-wired whip to the live (hot) wire from the power supply using a wire nut.
    • Connect the white wire from the fixture's pre-wired whip to the neutral wire from the power supply using a wire nut.
    • Connect the green (ground) wire from the fixture's pre-wired whip to the ground wire from the power supply using a wire nut.
    • For 0-10V dimming, connect the purple wire to the dimmer's positive (+) dimming control wire and the gray wire to the dimmer's negative (-) dimming control wire. If not using dimming, cap these wires individually.

    Image: Maxxima 8-inch Recessed Commercial LED Downlight with flexible conduit and wiring.

    Maxxima 8-inch Recessed Commercial LED Downlight with flexible metal conduit and wiring connections

    This image displays the downlight with its pre-wired flexible metal conduit, showing the individual wires for power and dimming connections. The tension spring clips are visible on the sides.

  3. Bezpečné upevnění: Gently push the fixture into the ceiling opening. The pre-attached tension spring clips will automatically engage and secure the downlight firmly against the ceiling surface. Ensure the safety cable is also properly secured to a structural element if required by local codes.

Obrázek: Zpět view of the Maxxima 8-inch Recessed Commercial LED Downlight showing tension clips.

Zadní view of Maxxima 8-inch Recessed Commercial LED Downlight with tension spring clips

This image shows the rear of the downlight, highlighting the robust tension spring clips that facilitate secure installation into the ceiling.

Návod k obsluze

The Maxxima 8-inch Recessed Commercial LED Downlight features selectable color temperature and wattage settings, allowing customization of light output.

  1. Vyberte teplotu barev (CCT): Before installation, or by carefully removing the fixture, locate the 'KELVIN SETTING' switch on the back of the downlight. Slide the switch to select your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
  2. Vyberte Wattage: Locate the 'WATTAGE SETTING' switch on the back of the downlight. Slide the switch to select your desired wattage: Low (12W), Med (20W), or High (30W). This will adjust the lumen output accordingly.
  3. Funkce stmívání: If connected to a compatible 0-10V dimmer, the light output can be adjusted from 20% to 100% brightness using the dimmer control.

Image: Maxxima 8-inch Recessed Commercial LED Downlight with CCT and Wattage přepínače voliče.

Close-up of Maxxima 8-inch Recessed Commercial LED Downlight showing Kelvin and Wattage přepínače voliče

Tento obrázek poskytuje detailní view of the back of the downlight, clearly showing the two slider switches for adjusting Kelvin (color temperature) and Wattage nastavení.

Image: Commercial LED Downlight illustrating 5 CCT options.

Maxxima 8-inch Commercial LED Downlight with visual representation of 5 selectable color temperatures

This image visually demonstrates the different color temperature options (2700K, 3000K, 3500K, 4000K, 5000K) available with the 8-inch commercial LED downlight.

Údržba

The Maxxima LED Downlight requires minimal maintenance. Ensure power is off before cleaning.

  • Čištění: Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp hadříkem. Nepoužívejte agresivní chemikálie, abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo elektrické součástky.
  • Inspekce: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.

Odstraňování problémů

ProblémMožná příčinaŘešení
Světlo se nerozsvítíNo power to the fixture; Loose wiring connection; Faulty switch/breakerCheck power supply at the circuit breaker. Verify all wire connections are secure. Test the switch or replace if faulty.
Světlo nečekaně bliká nebo ztmavneNekompatibilní stmívač; Uvolněné zapojení; Voltage výkyvyEnsure a compatible 0-10V dimmer is used. Check all wiring connections. Consult an electrician for voltage problémy.
Incorrect color temperature or brightnessCCT/Wattage selector switches set incorrectlyAdjust the CCT and Wattage selector switches on the back of the fixture to the desired settings.

Záruka

This Maxxima LED Downlight is backed by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.

Podpora

For technical assistance, troubleshooting, or product information, please contact Maxxima customer support. You can find contact details and additional resources on the official Maxxima webwebu nebo návštěvou Obchod Maxxima na Amazonu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.