Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light

1. Úvod

Thank you for choosing the Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light. This innovative product combines efficient ventilation with a high-fidelity Bluetooth speaker and integrated LED lighting, designed to enhance comfort and air quality in your bathroom. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your unit.

2. Bezpečnostní informace

Please read and understand all instructions before beginning installation or operation. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Always disconnect power at the service panel before wiring or servicing the unit.
• All wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
• Tato jednotka je určena pouze pro všeobecné použití při větrání. Nepoužívejte ji k odsávání nebezpečných nebo výbušných materiálů a par.
• To reduce the risk of fire or electrical shock, do not expose this unit to water or moisture.
• This product is UL listed for use over a bathtub or shower when connected to a GFCI-protected branch circuit (ceiling mount only).

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Ventilation Fan Housing
• Grille Assembly with Integrated LED Light and Bluetooth Speaker
• Instalační hardware
• Uživatelská příručka

4. Specifikace

5. Instalace

This fan is designed for easy installation, fitting 2"x8" ceiling construction. A tapered, polymeric 4-inch round duct fitting ensures a positive duct connection without metallic clatter.

Obecné kroky instalace:

1. Připravte oblast: Ensure power is disconnected at the circuit breaker. Clear the installation area in the ceiling.
2. Namontujte kryt: Secure the fan housing to the ceiling joists. The housing dimensions are approximately 8.25" x 8" x 5.75".
3. Připojení potrubí: Attach the 4-inch round duct to the fan's duct connector. Ensure a secure and airtight connection.
4. Wire the Unit: Connect the electrical wiring according to local electrical codes. The unit requires 120V power.
5. Install Grille Assembly: Once the housing is secured and wired, attach the grille assembly, ensuring it snaps firmly into place.

6. Návod k obsluze

Fan and Light Operation:

The fan and LED light are typically controlled via a standard wall switch. Consult your electrician for specific wiring configurations if you desire separate control for the fan and light functions.

Provoz Bluetooth reproduktoru:

The integrated Sensonic Bluetooth speaker allows you to stream audio wirelessly from any Bluetooth-enabled device.

Spárování vašeho zařízení:

1. Ensure the fan unit has power. The Bluetooth speaker will automatically enter pairing mode when powered on.
2. Na smartphonu nebo jiném zařízení s podporou Bluetooth přejděte do nastavení Bluetooth.
3. Look for a device named "FAN SPEAKER" (or similar, refer to your device's specific instructions if different).
4. Select "FAN SPEAKER" to pair. Once paired, you will hear an audible confirmation tone from the speaker.
5. You can now stream audio from your device to the fan's speaker.

The speaker does not require a specific application for functionality.

7. Údržba

Regular cleaning and maintenance will ensure the long-term performance and efficiency of your ventilation fan.

Čištění mřížky:

1. Disconnect power to the fan at the service panel.
2. Gently pull down the grille assembly from the ceiling. It is typically held by spring clips.
3. Wipe the grille with a damp cloth using a mild, non-abrasive cleaning solution. Do not spray water directly onto the grille or electrical components.
4. Allow the grille to dry completely before reattaching.

Cleaning the Fan Motor and Housing:

Periodically, the fan motor and housing may accumulate dust and debris. This should be cleaned by a qualified service person.

• Disconnect power to the fan at the service panel.
• Remove the grille assembly.
• Carefully vacuum or wipe away any dust from the fan blades and interior of the housing. Avoid touching electrical components.
• Reattach the grille assembly and restore power.

8. Řešení problémů

If your fan is not operating correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, please contact Broan-NuTone Customer Support.

9. Informace o záruce

The Broan-NuTone SPK80L Bluetooth Speaker Ventilation Fan with LED Light is backed by a Tříletá omezená záruka. This warranty covers defects in materials and workmanship under normal use and service. For full details regarding warranty coverage, terms, and conditions, please refer to the official warranty document included with your product or visit the Broan-NuTone webmísto.

10. Informace o podpoře

For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone Customer Support:

• Webmísto: Navštivte oficiální stránky Broan-NuTone webweb s častými dotazy, registrací produktů a dalšími zdroji.
• Telefon: Viz kontaktní informace uvedené na obalu produktu nebo oficiální webweb s telefonními čísly zákaznického servisu.

Please have your model number (SPK80L) and purchase date available when contacting support.