HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller User Manual

1. Úvod

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller. The HPE Smart Array P440 is a high-performance PCIe3 x8 SAS RAID controller designed for servers, offering 12Gb/s SAS connectivity and 2GB of Flash-Backed Write Cache (FBWC) for enhanced data protection and performance. It supports various RAID levels, providing robust storage solutions for demanding applications.

2. Bezpečnostní informace

Always observe the following safety precautions when handling or installing the controller:

• Ensure the server is powered off and disconnected from all power sources before installation or removal.
• Wear an anti-static wrist strap and work on an anti-static mat to prevent electrostatic discharge (ESD) damage to the controller and other components.
• Handle the controller by its edges; avoid touching the components or connectors directly.
• Refer to your server's documentation for specific safety guidelines and installation procedures.
• Do not attempt to modify or repair the controller. Contact qualified service personnel for assistance.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller
• Low-profile bracket (if applicable, may be pre-installed or included separately)
• Documentation (e.g., Quick Install Guide, Warranty Information)

Note: SAS cables and battery backup unit (BBU) for FBWC are typically sold separately.

4. Nastavení a instalace

4.1 Fyzická instalace

1. Prepare the Server: Power down the server and disconnect all power cords. Open the server chassis according to the manufacturer's instructions.
2. Vyhledejte dostupný slot PCIe: Identify an available PCIe 3.0 x8 or larger slot on the server's motherboard.
3. Nainstalujte ovladač: Carefully align the controller with the PCIe slot and press down firmly until it is securely seated. Secure the controller with the retention bracket or screw.
4. Connect SAS Cables: Connect the internal SAS cables from the controller's port to your SAS/SATA backplane or directly to your drives. Ensure secure connections.
5. Zavření a zapnutí: Close the server chassis, reconnect power cords, and power on the server.

Obrázek 1: Zadní view of the HPE Smart Array P440 Controller, highlighting the PCIe connector and various surface-mounted components. The model number 'CPLD 0101 8195' is visible on a chip. This image shows the side that interfaces with the motherboard.

Obrázek 2: Přední strana view of the HPE Smart Array P440 Controller, featuring a large heatsink for thermal management and the internal SAS port. A label with 'SP#830057-001 PFETL0ARH961KP' and 'SN: ZS79CP9638' is visible on the heatsink and a sticker, respectively. This image displays the side with the main processing unit and SAS connectors.

4.2 Instalace ovladače

Upon server boot, the operating system may automatically detect and install generic drivers. For optimal performance and full functionality, it is recommended to download and install the latest drivers and firmware from the official HPE support website for your specific server model and operating system.

4.3 Konfigurace pole RAID

The HPE Smart Array P440 controller supports various RAID levels (e.g., RAID 0, 1, 5, 6, 10, 50, 60). RAID configuration is typically performed using one of the following methods:

• HPE Smart Storage Administrator (SSA): A graphical utility for managing Smart Array controllers.
• Option ROM Configuration for Arrays (ORCA): Accessed during server boot-up by pressing a specific key combination (usually F8 or F9) when prompted.
• HPE Integrated Lights-Out (iLO): For remote management and configuration.

Refer to the HPE Smart Array P440 documentation on the HPE support website for detailed instructions on configuring RAID arrays.

5. Obsluha regulátoru

Once installed and configured, the HPE Smart Array P440 operates transparently within your server environment. Data is managed by the controller according to the configured RAID levels. You can monitor the controller and array status using HPE Smart Storage Administrator (SSA) or other system management tools provided by HPE.

• Sledování: Regularly check the health of your RAID arrays and individual drives through the SSA utility.
• Výkon: Ensure that the controller's firmware and drivers are up-to-date for optimal performance.
• FBWC: The Flash-Backed Write Cache protects data in transit to the drives during power outages, ensuring data integrity.

6. Údržba

Regular maintenance helps ensure the longevity and reliability of your HPE Smart Array P440 controller:

• Aktualizace firmwaru: Periodically check the HPE support website for new firmware versions. Firmware updates can improve performance, add features, and resolve known issues. Follow HPE's recommended procedures for firmware updates.
• Aktualizace ovladačů: Keep your operating system drivers for the controller updated to ensure compatibility and optimal performance.
• Fyzická kontrola: During server maintenance, visually inspect the controller for any signs of damage, loose connections, or excessive dust accumulation. Ensure proper airflow around the card.
• Battery Backup Unit (BBU): If a BBU is used with the FBWC, monitor its health and replace it as recommended by HPE to ensure write cache protection.

7. Řešení problémů

Tato část obsahuje řešení běžných problémů, se kterými se můžete setkat:

7.1 Controller Not Detected

• Zkontrolujte sedadla: Ensure the controller is fully seated in the PCIe slot.
• Moc: Verify the server has adequate power and that all power connections are secure.
• Slot PCIe: Try installing the controller in a different PCIe slot to rule out a faulty slot.
• Nastavení BIOSu/UEFI: Check server BIOS/UEFI settings to ensure PCIe slots are enabled and configured correctly.

7.2 Drives Not Detected

• SAS Cable Connections: Verify that all SAS cables are securely connected between the controller and the drives/backplane.
• Drive Power: Ensure that the drives are receiving power.
• Kompatibilita disku: Confirm that the drives are compatible with the HPE Smart Array P440 controller.
• Konfigurace RAID: Check the RAID configuration utility (SSA or ORCA) to see if drives are visible but not configured into an array.

7.3 Problémy s výkonem

• Firmware/Drivers: Update controller firmware and drivers to the latest versions.
• Úroveň RAID: Ensure the chosen RAID level is appropriate for your workload. Some RAID levels offer better performance than others.
• Stav disku: Check the health of individual drives in the array. Degraded drives can impact performance.
• Cache Settings: Verify FBWC is functioning correctly and configured optimally.

For more advanced troubleshooting, consult the HPE Smart Array P440 documentation or contact HPE technical support.

8. Specifikace

9. Záruka a podpora

The HPE Smart Array P440/2GB FBWC 12GB 1-Port INT SAS Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official HPE support webmísto.

For technical assistance, driver downloads, firmware updates, and additional documentation, please visit the HPE support webmísto:

https://www.hpe.com/support

When contacting support, have your product model number (830057-001) and serial number ready.