Ensenior 4 Pack 4 Inch LED Recessed Light Instruction Manual

1. Bezpečnostní informace

Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Keep this manual for future reference.

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení v pojistkové skříni nebo jističi.
• VAROVÁNÍ: Nebezpečí požáru. Používejte pouze v obvodech s napětím 120 V AC, 60 Hz.
• POZOR: Vhodné pro damp umístění. Nepoužívejte tam, kde je přímo vystavena vodě.
• Hodnocení IC: Vhodné pro přímý kontakt s izolací.
• Ensure all electrical connections are in accordance with local codes and ordinances, National Electric Code (NEC), and ANSI/NFPA 70-1999.
• Do not alter, relocate, or remove wiring.
• Do not attempt to disassemble the light fixture. There are no user-serviceable parts inside.

2. Konec produktuview

The Ensenior 4 Pack 4 Inch LED Recessed Light is an ultra-thin, canless wafer ceiling light designed for various indoor applications. It offers high brightness, energy efficiency, and adjustable color temperature options to suit different environments.

• Vysoký jas: 750 Lumens output with only 9 Watts power consumption.
• Stmívatelné: Smooth dimming from 5% to 100% (compatible with most dimmers).
• Teplota barev: This specific model provides 5000K Daylight. Other variants may offer 2700K, 3000K, 3500K, 4000K, or 6000K.
• Ultratenký design: Ideal for installations with limited ceiling space.
• certifikace: ETL & FCC certified, IC rated for thermal protection.

Figure 2.1: Key features of the Ensenior 4 Inch LED Recessed Light.

3. Co je v krabici

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Recessed Light (4 units)
• Junction Box (4 units)
• Návod k použití (tento dokument)
• Cutting Template (1 unit)

4. Specifikace

Figure 4.1: Product Dimensions and Recommended Hole Size (4.25" ~ 4.6").

5. Pokyny k instalaci

Follow these steps for a hassle-free installation. Always ensure power is disconnected before starting.

1. Připravte si strop: Use the provided cutting template to mark and cut a hole in the ceiling. The recommended hole size is 4.25" to 4.6".
2. Připojení kabeláže: Open the junction box. Connect the household electrical wires (live, neutral, ground) to the corresponding terminals inside the junction box. Ensure secure connections.
3. Připojení světelného panelu: Connect the male/female cable from the junction box to the light fixture.
4. Montážní světlo: Push the spring clips on the light fixture upwards and insert the fixture into the ceiling hole. The clips will secure the light in place.

Obrázek 5.1: Podrobný návod k instalaci.

6. Návod k obsluze

The Ensenior LED Recessed Light is designed for simple operation once installed.

6.1 Funkce stmívání

This light fixture is 5%-100% dimmable. Use a compatible LED dimmer switch (sold separately) to adjust the brightness level to your preference. Ensure the dimmer is rated for LED lighting to prevent flickering or damage.

Figure 6.1: Illustration of 5%-100% smooth dimming capability.

6.2 Color Temperature Adjustment (for 5CCT models only)

Note: This specific model (4I-5000K-4PACK) is fixed at 5000K Daylight. The following instructions apply to multi-CCT models only.

For models with multiple color temperature options (e.g., 5CCT), a switch is located on the side of the junction box. Before installation, select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. Once installed, the color temperature cannot be changed without removing the fixture to access the switch.

Obrázek 6.2: Přamples of different color temperatures in various room types.

7. Dimmer Compatibility Guide

For optimal dimming performance, use dimmers listed in the compatibility guide below. Other models may also be suitable, but compatibility is not guaranteed.

Figure 7.1: Dimmer Compatibility Guide.

8. Recommended Spacing

Proper spacing of recessed lights ensures even illumination and avoids dark spots. For a 4-inch light, a general recommendation is 2-4 feet between fixtures, depending on ceiling height and desired brightness.

Figure 8.1: Recommended spacing for recessed lights.

9. Údržba

Ensenior LED Recessed Lights are designed for long-lasting performance with minimal maintenance.

• Čištění: Před čištěním se ujistěte, že je zařízení vypnuté. Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Žádné díly opravitelné uživatelem: The LED module is integrated and not replaceable. Do not attempt to open or repair the fixture.

10. Řešení problémů

If you experience issues with your Ensenior LED Recessed Light, refer to the following common problems and solutions:

• Světlo se nerozsvítí:
  • Zkontrolujte, zda je správně připojeno napájení.
  • Ověřte, zda není vypnutý jistič.
  • Ensure all wiring connections in the junction box are secure.
  • Confirm the male/female connector between the light and junction box is fully engaged.
• Blikání světla:
  • Ensure you are using a compatible LED dimmer switch. Refer to the Dimmer Compatibility Guide.
  • Zkontrolujte, zda nejsou uvolněné kabelové spoje.
• Light is not the expected brightness:
  • Adjust the dimmer switch to its maximum setting.
  • Ověřte napájení objtage je 120V.

11. Záruka a podpora

Ensenior stands behind the quality of its LED recessed lighting products.

• Záruka: Na tento produkt se vztahuje 5letá záruka.
• Životnost: Navrženo pro průměrnou životnost 15 000 hodin.
• Služby zákazníkům: For any questions or support, please contact Ensenior customer service.