BLACK+DECKER 12 Amp Návod k obsluze 16palcové elektrické řetězové pily (CS1216)

1. Bezpečnostní informace

Always prioritize safety when operating any power tool. Read and understand all instructions before use. Failure to follow safety warnings and instructions may result in electric shock, fire, and/or serious injury.

Obecná bezpečnostní pravidla

• Používejte vhodné osobní ochranné prostředky (OOP) včetně ochranných brýlí, chráničů sluchu, rukavic a pevné obuvi.
• Udržujte děti, kolemjdoucí a zvířata alespoň 50 stop (15 metrů) od pracovního prostoru.
• Nepoužívejte motorovou pilu ve vlhkém prostředí nebo v přítomnosti hořlavých kapalin či plynů.
• Ensure the work area is clear of obstacles and has good lighting.
• Vždy udržujte správný postoj a rovnováhu. Nepřehánějte se.
• Never operate the chainsaw with one hand. Always use two hands to grip the saw firmly.
• Be aware of kickback. Kickback can occur when the moving chain at the tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.
• Disconnect the chainsaw from the power source before making any adjustments, changing accessories, or storing the tool.

Elektrická bezpečnost

• Use only extension cords suitable for outdoor use and rated for the chainsaw's power requirements.
• Inspect the power cord and extension cord for damage before each use. Do not use if damaged.
• Udržujte napájecí kabel mimo oblast řezání.

2. Obsah balení

Your BLACK+DECKER 12 Amp 16-inch Electric Chainsaw package includes the following items:

• 1 x BLACK+DECKER 12 Amp 16-inch Electric Chainsaw
• 1 x Scabbard (Bar and Chain Cover)

3. Nastavení a montáž

Before operating your chainsaw, ensure proper assembly and preparation.

3.1 Instalace řetězu a lišty

The chainsaw comes with the bar and chain pre-installed. However, it is important to verify the chain direction and tension before first use and after any maintenance.

1. Ujistěte se, že je řetězová pila odpojena od zdroje napájení.
2. Loosen the tool-free chain tensioning knob by turning it counter-clockwise.
3. Sejměte boční kryt.
4. Carefully place the chain around the sprocket and guide bar, ensuring the cutting edges of the chain teeth are facing forward (away from the motor) on the top of the bar.
5. Re-attach the side cover and hand-tighten the tensioning knob.

Obrázek 1: Přesview of the BLACK+DECKER Electric Chainsaw highlighting key features like the low-kickback bar and chain, clear oil level window, and tool-free chain tensioning.

Obrázek 2: Detail view of the tool-free chain tensioning mechanism, allowing for quick adjustments without additional tools.

3.2 Adding Bar and Chain Oil

The chainsaw features an automatic oiling system. Always ensure the oil reservoir is filled before operation.

1. Odšroubujte víčko oleje, které se nachází na horní straně motorové pily.
2. Fill the reservoir with high-quality bar and chain oil. Do not use waste oil or motor oil.
3. Monitor the clear oil window to avoid overfilling.
4. Replace the oil cap and tighten securely.

Obrázek 3: Detailní view of the automatic oiling system, showing the clear window for easy oil level monitoring.

4. Návod k obsluze

Follow these steps for safe and effective operation of your electric chainsaw.

4.1 Startování motorové pily

1. Ujistěte se, že je brzda řetězu uvolněná (zatažená dozadu směrem k přední rukojeti).
2. Plug the chainsaw into a suitable power outlet using a heavy-duty outdoor extension cord.
3. Grip the rear handle with your right hand and the front handle with your left hand.
4. Press the safety lock-off button with your thumb, then squeeze the trigger switch to start the motor.

4.2 Techniky řezání

12 Amp motor and 16-inch low-kickback bar and chain are designed for smooth operation.

• Always start the cut with the chain running at full speed.
• Nechte pilu, ať si práci udělá; netlačte ji do dřeva silou.
• For felling small trees, make a notch cut on the side of the tree in the direction of the fall, then make a felling cut from the opposite side.
• For limbing, work from the bottom up, supporting the branch to prevent pinching.
• For bucking (cutting a fallen log into sections), use a sawhorse or elevate the log to prevent the chain from hitting the ground.

Figure 4: An individual demonstrating the use of the electric chainsaw to cut through a log on the ground, showcasing its cutting capability.

5. Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vaší motorové pily.

5.1 Napnutí řetězu

Check chain tension frequently, especially during the first hour of operation. A properly tensioned chain should be snug against the guide bar but still allow you to pull it around the bar by hand.

• To adjust, loosen the tool-free chain tensioning knob slightly.
• Turn the adjustment dial (usually located near the tensioning knob) to increase or decrease tension.
• Once tension is correct, re-tighten the tool-free chain tensioning knob securely.

5.2 Oiling System

The automatic oiling system requires consistent monitoring.

• Check the oil level using the clear oil window before each use and periodically during operation.
• Refill with bar and chain oil as needed.
• Ensure the oil cap is clean and securely fastened to prevent leaks and contamination.

5.3 Čištění

• After each use, disconnect the power and clean sawdust and debris from the motor housing, guide bar, and chain.
• Use a stiff brush or compressed air. Do not use water to clean the motor area.

6. Řešení problémů

7. Specifikace

• Značka: ČERNÁ+DECKER
• Číslo modelu: CS1216
• Zdroj napájení: Elektrický kabel
• Motor: 12 Amp
• Délka řetězu: 16 palce
• Hmotnost položky: 10 libry
• Rozměry produktu: 19 cm D x 9 cm Š x 12 cm V
• Vlastnosti: Low-Kickback Bar and Chain, Tool-Free Chain Tensioning, Automatic Oiling System, Clear Oil Window

8. Záruka a podpora

For warranty information, technical support, or to purchase replacement parts, please refer to the official BLACK+DECKER webnebo se obraťte na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.