SANSUI TU-α707i Digital Synthesizer FM/AM Tuner

Zavedení

This manual provides detailed instructions for the proper setup, operation, and maintenance of your SANSUI TU-α707i Digital Synthesizer FM/AM Tuner. Please read this manual thoroughly before using the unit to ensure optimal performance and longevity. Keep this manual for future reference.

Bezpečnostní informace

• Napájení: Zapojte přístroj pouze do síťové zásuvky danéhotage specifikováno na jednotce.
• Větrání: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow.
• Vlhkost a kapaliny: Nevystavujte jednotku dešti, vlhkosti ani kapajícím/stříkajícím tekutinám. Na jednotku nestavte předměty naplněné tekutinami, například vázy.
• Teplo: Udržujte jednotku mimo dosah zdrojů tepla, jako jsou radiátory, topná tělesa, kamna nebo jiná zařízení produkující teplo.
• Čištění: Disconnect the power cord from the wall outlet before cleaning. Use a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners.
• Servis: Nepokoušejte se tento výrobek opravit sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.

Vlastnosti produktu

The SANSUI TU-α707i Digital Synthesizer FM/AM Tuner incorporates advanced technologies for superior audio reception and quality:

• Equipped with SANSUI's unique Super Linear System digital synthesizer FM/AM tuner.
• Features SANSUI's unique Super Linear Receiving Circuit (SLRC), achieving both high-sensitivity reception for weak signals and effective interference rejection for strong signals.
• The IF section includes a WIDE/NARROW bandwidth switching mechanism. WIDE mode provides high-quality reception with low distortion, while NARROW mode minimizes adjacent station interference in strong signal areas, ensuring reliable reception of the desired station.
• Incorporates the newly developed Super Linear Detector Circuit (SLDC) for linear detection of audio signals from FM waves.
• The MPX section utilizes SANSUI's original digital decoder SLDD IV. This digital processing method avoids harmonic components that can cause adjacent station demodulation, precisely stereo demodulating only the desired station's signal.
• The power supply section employs a multi-power supply circuit that independently supplies power to the audio, RF, and control systems, enhancing stability and performance.
• Equipped with A/B two-system antenna inputs and a switching function. This allows for adaptation to the arrival direction of radio waves from different FM stations, achieving optimal reception.
• Features a direct input function for tuning by entering the desired station's frequency using the 10-key pad. Includes one-touch preset memory, memory scan for quickly selecting preset stations, and a LAST-2 memory function for programmed recording of two broadcast stations.

Nastavení

1. Připojení antény

Connect your FM and AM antennas to the corresponding terminals on the rear panel of the tuner. The TU-α707i features two FM antenna inputs (A and B) to optimize reception from different directions. Use a 75Ω coaxial cable for FM antenna connections. For AM, connect the supplied loop antenna or an external AM antenna.

2. Připojení audio výstupu

Connect the audio output jacks (RCA L/R) of the TU-α707i to an available input on your amplifier or receiver (e.g., 'Tuner' or 'Aux' input) using appropriate RCA audio cables.

3. Připojení napájení

Plug the power cord into an AC wall outlet. Ensure the voltage odpovídá specifikacím jednotky.

Návod k obsluze

1. Zapnutí/vypnutí

Press the POWER button on the front panel to turn the unit on or off.

2. Selecting FM/AM Band

Press the FM or AM button to select the desired broadcasting band.

3. Ladění stanic

• Přímý vstup: Use the 10-key pad to directly enter the frequency of the desired station. Press the 'Enter' button to confirm.
• Přednastavená paměť: The tuner supports 10 preset stations for both FM and AM. To recall a preset station, press the corresponding preset number button.
• Skenování paměti: Activate the Memory Scan function to quickly cycle through and listen to your preset stations.
• Ruční ladění: Use the tuning knob or up/down arrow buttons to manually adjust the frequency.

4. FM Bandwidth Selection (WIDE/NARROW)

For FM reception, press the WIDE/NARROW button to switch between bandwidth modes. Use WIDE for optimal sound quality in strong signal areas and NARROW to reduce interference from adjacent stations in crowded broadcast environments.

5. Antenna A/B Switching

If you have connected two FM antennas, use the A/B antenna selector button to switch between them. Select the antenna that provides the best reception for the current station.

6. LAST-2 Memory Function

The LAST-2 memory function allows you to program and quickly switch between two specific broadcast stations, useful for timed recording with an external recorder.

Údržba

Čištění jednotky

To clean the exterior of the tuner, first disconnect the power cord. Use a soft, dry cloth to wipe surfaces. For stubborn dirt, lightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the finish. Do not allow liquids to enter the unit.

Obecná péče

Ensure the unit is placed in a well-ventilated area to prevent overheating. Avoid exposing the tuner to direct sunlight, extreme temperatures, or high humidity. Regularly check cable connections to ensure they are secure.

Odstraňování problémů

If you experience issues with your SANSUI TU-α707i, refer to the following common problems and solutions:

Pokud problém přetrvává i po vyzkoušení těchto řešení, obraťte se na kvalifikovaný servisní personál.

Specifikace

Záruka a podpora

For warranty information and customer support, please refer to the warranty card included with your product or visit the official SANSUI website. Keep your purchase receipt as proof of purchase for any warranty claims. Do not attempt to repair the unit yourself, as this may void your warranty.