Luceco LED Inspection Head Torch

Zavedení

This manual provides essential information for the safe and effective use of your Luceco LED Inspection Head Torch. Please read these instructions carefully before operating the device and retain them for future reference. This head torch is designed for various applications, including professional inspection, DIY tasks, camping, and other outdoor activities, offering versatile lighting modes and hands-free operation.

Obrázek 1: Přední strana view of the Luceco LED Inspection Head Torch.

Konec produktuview

The Luceco LED Inspection Head Torch is a versatile and durable lighting solution. Key features include:

• 5 režimy osvětlení: Includes 100% output, 50% output, flash mode, red light, and red flash mode.
• PIR Motion Sensor: For hands-free operation, allowing activation and deactivation with a wave of the hand.
• Nastavitelný sklon: The torch head can be tilted up to 60 degrees to direct light precisely where needed.
• Dobíjecí baterie: Integrated lithium polymer battery, conveniently charged via USB Type-C.
• Odolná konstrukce: Lightweight ABS body with an IK04 rating, designed to withstand tough environments.
• Nastavitelná čelenka: Elastic headband ensures a comfortable and secure fit for various head sizes.

Nastavení

1. Počáteční nabíjení

Before first use, fully charge the head torch. Connect the provided USB Type-C cable to the charging port on the head torch and plug the other end into a compatible USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes approximately 2.5 hours.

Figure 2: USB Type-C charging port for convenient recharging.

2. Nastavení čelenky

Place the head torch on your head. Adjust the elastic headband by sliding the buckles on either side until it fits snugly and comfortably. Ensure the torch unit is centered on your forehead.

Figure 3: The adjustable headband ensures a comfortable and secure fit.

Návod k obsluze

1. Zapnutí/vypnutí a výběr režimu

Locate the power button on the top of the head torch. Press the button to cycle through the following lighting modes:

1. První stisk: 100% Light Output (150lm)
2. Druhý stisk: 50% Light Output
3. Třetí stisk: Režim Flash
4. Čtvrtý tisk: Červené světlo
5. Páté stisknutí: Červený režim blesku
6. Šestý tisk: Vypnuto

To turn off the torch from any mode, press and hold the power button for approximately 2 seconds.

Figure 4: The head torch offers five versatile lighting modes.

2. PIR Motion Sensing Function

The head torch features a PIR motion sensor for hands-free control. To activate this function, press the dedicated motion sensor button (usually located near the power button). Once activated, you can turn the light on or off by waving your hand in front of the sensor.

3. Tilting the Torch Head

The torch head can be manually tilted up or down to adjust the beam angle. Gently push the torch unit to achieve the desired angle, up to 60 degrees. This allows you to focus light on specific areas without repositioning the entire head torch.

Figure 5: The torch head can be tilted for precise light direction.

Údržba

1. Čištění

To clean the head torch, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the charging port cover is securely closed before cleaning to prevent water ingress.

2. Péče o baterie

The integrated lithium polymer battery is designed for long life. To maximize battery longevity:

• Recharge the battery when the light output becomes noticeably dim.
• Vyhněte se častému úplnému vybíjení baterie.
• If storing the head torch for an extended period, charge it to approximately 50% every 3-6 months.

3. Skladování

Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from corrosive materials and out of reach of children.

Odstraňování problémů

If you encounter issues with your Luceco LED Inspection Head Torch, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Luceco customer support.

Specifikace

Záruka a podpora

The Luceco LED Inspection Head Torch comes with a 1letá záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the dedicated Luceco technical support team. Please have your product model number (LILH15P65-01) and proof of purchase ready when contacting support.