Zavedení
This manual provides essential information for the safe installation, operation, and maintenance of your Amazon Basics 40W Waterproof LED Outdoor Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
Bezpečnostní informace
- VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
- Tento produkt musí být instalován v souladu s platným instalačním předpisem osobou obeznámenou s konstrukcí a provozem produktu a souvisejícími riziky.
- Ground the fixture properly to avoid potential electrical shock and to ensure reliable operation.
- Nepřipojujte k stmívači.
- Nedívejte se přímo do zdroje světla LED.
- Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
- Provozní teplotní rozsah: -20 °C až 40 °C (-4 °F až 104 °F).
Obsah balení
- Amazon Basics 40W LED Outdoor Motion Sensor Security Light (1 unit)
- Montážní materiál (šrouby, matice)
- Návod k použití
Vlastnosti produktu
The Amazon Basics 40W LED Outdoor Motion Sensor Security Light is designed for reliable outdoor illumination with energy efficiency and adjustable features.
- Vysoký jas: 2 ultra-bright LED light heads produce up to 4000 lumens at 5000K daylight color temperature.
- Detekce pohybu: Integrated motion sensor with up to 180° detection angle and a range of up to 49 feet.
- Nastavitelný design: LED heads are flexibly adjustable 350° horizontally and 60° vertically. The motion sensor is adjustable 180° horizontally and 90° vertically.
- Odolná konstrukce: Aluminum design for effective heat dissipation and a bulb lifespan of up to 50,000 hours.
- Odolný vůči povětrnostním vlivům: Waterproof rating ensures resilience against rain, sleet, or snow.
- Certifikace ETL: Meets safety and quality standards.
Obrázek: Přední strana view of the Amazon Basics 40W LED Outdoor Motion Sensor Security Light, highlighting its two adjustable light heads and motion sensor.
Nastavení
Follow these steps for proper installation of your security light. Professional installation is recommended if you are unfamiliar with electrical wiring.
- Připravte se na instalaci:
- Turn off power at the circuit breaker or fuse box before beginning installation.
- Ujistěte se, že montážní povrch je stabilní a unese hmotnost svítidla.
- Namontujte přípravek:
- Připevněte montážní držák ke spojovací krabici pomocí dodaných šroubů.
- Connect the electrical wires: black to black (live), white to white (neutral), and green/bare copper to ground. Secure connections with wire nuts.
- Carefully push the wires into the junction box and secure the fixture to the mounting bracket.
- Nastavení světelných hlavic a senzoru:
- Loosen the adjustment screws on the light heads and motion sensor.
- Umístěte světelné hlavy tak, aby pokrývaly požadovanou oblast osvětlení.
- Angle the motion sensor to optimize detection coverage, typically pointing slightly downwards.
- Tighten all adjustment screws securely.
- Obnovit napájení: Znovu zapněte napájení na jističi.
Image: The security light installed on the exterior wall of a building, illuminating the area below.
Návod k obsluze
The motion sensor has adjustable settings to customize its operation.
- Nastavení ČASU: This dial controls how long the light remains on after motion is detected. Adjust from 5 seconds to 12 minutes.
- LUX (Daylight) Setting: Tento volič určuje úroveň okolního osvětlení, při které se aktivuje senzor pohybu.
- Turn towards the "Sun" symbol for activation during both day and night.
- Turn towards the "Moon" symbol for activation only during nighttime or low-light conditions.
- Počáteční zapnutí: Upon first power-up, the light may stay on for a short period (e.g., 5 minutes) as it calibrates. After this initial period, it will operate according to your chosen settings.
Údržba
- Čištění: Vyčistěte přípravek měkkým, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Před čištěním se ujistěte, že je přístroj vypnutý.
- Inspekce: Periodically check for loose wiring or damaged components. Replace any damaged parts immediately.
- LED diody: The integrated LED bulbs are designed for long life and are not user-replaceable.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power; faulty wiring; LUX setting too high (daylight). | Check circuit breaker; verify wiring connections; adjust LUX setting towards "Moon" symbol. |
| Světlo svítí nepřetržitě. | Motion sensor continuously triggered; TIME setting too long; LUX setting too low (always active). | Adjust sensor angle to avoid constant triggers; reduce TIME setting; adjust LUX setting towards "Sun" symbol. |
| Světlo bliká nebo ztmavne. | Loose wiring connection; power fluctuations. | Check and secure all wiring connections; consult an electrician if power fluctuations persist. |
| Dosah pohybového senzoru je slabý. | Sensor obstructed; incorrect angle; environmental factors (temperature). | Clear obstructions; adjust sensor angle; consider environmental conditions. |
Specifikace
| Číslo modelu | SM-4000-180-2H |
| Značka | Základy Amazonu |
| Wattage | 40W |
| Jas | 4000 XNUMX lumenů |
| Teplota barev | 5000K denní světlo |
| Detekční úhel | Až 180° |
| Rozsah detekce | Až 49 stop |
| svtage | 120 voltů |
| Materiál | Hliník, Plast |
| Úroveň odolnosti proti vodě | Vodotěsný |
| Certifikace | Certifikováno ETL |
| Rozměry položky (D x Š x V) | 14.96 cm x 6.3 cm x 5.12 cm |
| Hmotnost položky | 1.9 libry |
Záruka a podpora
For warranty information or technical support, please refer to the Amazon Basics product page or contact Amazon customer service. Keep your purchase receipt for warranty claims.