1. Úvod
The Sovol Solar Turntable is designed to provide a 360° rotating platform for the uniform curing of UV resin 3D prints. This stand utilizes solar or strong artificial light sources (like UV lamps) to power its rotation, ensuring that all surfaces of your 3D printed models receive consistent exposure during the curing process. It is also suitable for displaying small items such as jewelry, mobile phones, watches, and crystal objects.
2. Bezpečnostní informace
Před použitím výrobku si prosím přečtěte všechny bezpečnostní pokyny. Uschovejte si tento návod pro budoucí použití.
- Nevystavujte zařízení extrémním teplotám (nad 80 °C nebo pod -20 °C).
- Zabraňte přímému kontaktu s vodou nebo jinými kapalinami.
- Nepokoušejte se zařízení rozebírat nebo upravovat.
- Ensure the turntable is placed on a stable, flat surface during operation.
- This device is powered by light; it does not require or use batteries for its primary function.
- When using for UV resin curing, always follow safety guidelines for handling UV resin and operating UV light sources. Wear appropriate personal protective equipment (PPE) such as gloves and eye protection.
Image: Product packaging showing safety warnings and manufacturer details. Always adhere to all listed safety precautions.
3. Obsah balení
Balení obsahuje následující položku:
- 1 x Sovol Solar Turntable 360° Rotating Stand
4. Specifikace
| Funkce | Specifikace |
|---|---|
| Materiál produktu | ABS |
| Barva | Stříbro |
| Tepelná odolnost Teplota | 80 °C |
| Cold Resistance Temperature | -20 °C |
| Solar Battery Voltage | 1.2 V |
| Maximální nosnost | 300g - 500g (0.66 - 1.1 lbs) |
| Maximální rychlost otáčení | 4.5 circles/minute |
| Rozměry (D x Š x V) | Přibližně 10 x 10 x 4.5 cm (3.94 x 3.94 x 1.77 palce) |
| Průměr zásobníku | Přibl. 9 cm (3.5 palců) |
| Hmotnost položky | 110 g |
| Typ zdroje napájení | Solar (Light-powered) |
| Jsou vyžadovány baterie | Žádný |
| Číslo modelu | XZBDS |
Image: Dimensional diagram of the Sovol Solar Turntable.
5. Nastavení
- Vybalení gramofonu: Carefully remove the solar turntable from its packaging.
- Umístění: Place the turntable on a flat, stable surface. Ensure there is sufficient space around it for the items you intend to display or cure.
- Světelný zdroj: Position the turntable in an area with adequate light. For UV resin curing, a dedicated UV light source is required. For general display, natural sunlight or strong fluorescent lighting will suffice. The turntable's solar panels (visible on the base) need to be exposed to light to initiate rotation.
- Initial Rotation: If the turntable does not start rotating immediately, gently nudge it to overcome initial inertia. Stronger light will result in faster and more consistent rotation.
Image: The solar turntable positioned next to a UV light source, ready for operation.
Image: Detail of the solar panels on the turntable base, which power the rotation.
6. Návod k obsluze
- Umístit položku: Carefully place the item you wish to rotate (e.g., a 3D print for curing, or a display item) onto the center of the turntable's transparent tray. Ensure the weight does not exceed the maximum load capacity of 500g (1.1 lbs).
- Aktivovat rotaci: Expose the solar panels on the turntable's base to a strong light source. For UV resin curing, this will be your UV curing lamp. For display purposes, natural sunlight or bright indoor lighting is sufficient. The turntable will begin to rotate automatically.
- Monitor Curing (for 3D prints): When curing UV resin prints, ensure the UV light source is positioned to evenly illuminate the rotating object. The 360° rotation helps achieve uniform curing on all sides.
- Zastavení rotace: To stop the rotation, remove the turntable from the light source. There is no on/off switch; the device is entirely light-powered.
Image: The solar turntable in operation, rotating a 3D print under a UV light for curing.
Obrázek: Přample setup of the turntable within a DIY curing station, demonstrating its use with a UV light.
7. Údržba
- Čištění: Wipe the turntable with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no water enters the internal components. Do not use abrasive cleaners or solvents.
- Skladování: When not in use, store the turntable in a cool, dry place away from direct sunlight to prevent unnecessary rotation and potential wear.
- Inspekce: Periodically check the turntable for any signs of damage or obstruction that might hinder its rotation.
8. Řešení problémů
- Problem: Turntable does not rotate.
- Řešení 1: Ensure the solar panels on the base are exposed to sufficient light. The device requires strong light (natural sunlight, UV lamp, or bright fluorescent light) to operate.
- Řešení 2: Check if the item placed on the turntable exceeds the maximum weight load (500g / 1.1 lbs).
- Řešení 3: Gently nudge the turntable to overcome initial inertia.
- Řešení 4: Ensure there are no obstructions preventing rotation.
- Problem: Rotation is slow or inconsistent.
- Řešení 1: Increase the intensity or proximity of the light source to the solar panels. Stronger light results in faster rotation.
- Řešení 2: Reduce the weight of the item on the turntable.
- Řešení 3: Ensure the turntable is on a perfectly flat surface to prevent friction.
9. Záruka a podpora
Sovol is committed to providing quality products. If you encounter any issues with your Solar Turntable, please do not hesitate to contact Sovol customer support. We offer a full refund or replacement for product problems.
For support, please visit the official Sovol website or contact their customer service channels. Refer to your purchase documentation for specific contact details.