Vissani QR254S
Návod k obsluze pro odsavač par pod skříňku Vissani 30"
Model: QR254S
Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your Vissani Under Cabinet Range Hood. Please read thoroughly before use to ensure safe and efficient operation of the appliance.
Důležité bezpečnostní pokyny
Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob, dodržujte následující:
- Nainstalujte tento odsavač par v souladu se všemi uvedenými pokyny.
- Před prováděním údržby nebo čištění jednotky vždy odpojte napájení.
- Neprovozujte žádný ventilátor s poškozeným kabelem nebo zástrčkou. Ventilátor zlikvidujte nebo jej vraťte do autorizovaného servisního zařízení ke kontrole a/nebo opravě.
- Pro správné spalování a odvod plynů kouřovodem (komínem) zařízení na spalování paliva je zapotřebí dostatek vzduchu, aby se zabránilo zpětnému tahu. Dodržujte pokyny výrobce topného zařízení a bezpečnostní normy, jako jsou normy vydané Národní asociací protipožární ochrany (NFPA), Americkou společností pro inženýry vytápění, chlazení a klimatizace (ASHRAE) a místními předpisy.
- Při řezání nebo vrtání do stěny nebo stropu nepoškoďte elektrické vedení a další skryté inženýrské sítě.
- Potrubní ventilátory musí být vždy odvětrávány do venkovního prostředí.
- Často čistěte tukové filtry. Tuk by se neměl hromadit na ventilátoru ani na filtru.
- Use proper size wiring and always use a dedicated circuit.
- Tato jednotka musí být uzemněna.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a v dobrém stavu.
- Vissani Under Cabinet Range Hood Unit
- Charcoal Filter (included for ductless operation)
- Montážní materiál (šrouby, hmoždinky)
- Duct Connector (for ducted installation)
- Uživatelská příručka

Components included with the Vissani range hood, showing filters, duct connector, and mounting hardware.
Nastavení a instalace
The Vissani Under Cabinet Range Hood can be installed as either ducted (vented to the outside) or ductless (recirculating with charcoal filters).
Kontrolní seznam před instalací
- Ensure the cabinet measurements are appropriate for a 30-inch range hood.
- Verify electrical supply is available and meets specifications.
- For ducted installation, ensure proper ductwork is in place.
- For ductless installation, ensure charcoal filters are installed.
Montáž digestoře
- Carefully measure and mark the mounting points under the cabinet.
- Vyvrtejte vodicí otvory pro montážní šrouby.
- Lift the range hood into position and secure it with the provided screws.
- Connect the electrical wiring according to local codes and the wiring diagram in the manual.
- If installing as ducted, connect the ductwork to the top exhaust port. If ductless, ensure the charcoal filter is properly seated.

Přední view of the Vissani Under Cabinet Range Hood installed under a kitchen cabinet.

Strana view of the Vissani Under Cabinet Range Hood, showcasinjeho elegantní design z nerezové oceli.
Obsluha digestoře
The Vissani range hood features intuitive push-button controls for easy operation of its lighting and fan functions.
Ovládací panel
The control panel is located on the front of the range hood and consists of five push buttons:
- Světelné tlačítko: Zapíná/vypíná LED světla.
- Fan Speed 1: Activates the fan at low speed.
- Fan Speed 2: Activates the fan at medium speed.
- Fan Speed 3: Activates the fan at high speed.
- Tlačítko vypnutí: Vypne ventilátor.

Detailní záběr view of the range hood's control panel, showing the push buttons for light and fan speed settings.
Provoz světla
Press the light button (indicated by a light bulb icon) to turn the LED lights on or off. The lights illuminate your cooking surface effectively.
Ovládání rychlosti ventilátoru
Select the desired fan speed (1, 2, or 3) based on your cooking needs. Speed 1 is for light ventilation, while Speed 3 provides maximum extraction for heavy cooking fumes. Press the 'Off' button to turn the fan off.
Údržba a péče
Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho odsavače par.
Čištění filtrů
The mesh filters should be cleaned regularly to prevent grease buildup. To remove, locate the latch on each filter, push it in, and pull the filter down. Clean with warm, soapy water or in a dishwasher. Ensure filters are completely dry before re-installing.

Detailní záběr view of the mesh filter, designed to trap grease and odors.

A hand demonstrating the simple process of removing the mesh filter for cleaning.
Výměna uhlíkového filtru
For ductless (recirculating) installations, the charcoal filter traps odors and should be replaced every 3-6 months depending on usage. Refer to the filter's specific instructions for replacement.

The charcoal filter, essential for odor removal in ductless configurations.
Výměna žárovky
The range hood uses GU10 LED bulbs (max 5W). To replace, ensure power is off, then carefully twist and pull out the old bulb. Insert the new bulb by aligning the pins and twisting to secure.

Close-up of the LED light fixture, showing the GU10 bulb type.

A hand indicating the location of the light fixture and the filter release latch.
Průvodce řešením problémů
Refer to this guide for common issues and their solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ventilátor nefunguje | No power supply; Fan switch off; Motor malfunction. | Check circuit breaker/fuse; Ensure fan switch is on; Contact customer support if motor is faulty. |
| Světla nefungují | Light switch off; Bulb loose or burnt out; Wiring issue. | Ensure light switch is on; Tighten or replace bulb; Check wiring connections. |
| Nedostatečné sání | Grease filters clogged; Charcoal filters saturated (ductless); Improper installation; Obstruction in ductwork. | Clean or replace filters; Verify proper installation and sealing; Check for duct obstructions. |
| Nadměrný hluk | Loose parts; Fan motor imbalance; Obstruction in fan blades. | Check for loose screws or components; Inspect fan blades for debris; Contact customer support if motor is imbalanced. |
Specifikace produktu
| Funkce | Specifikace |
|---|---|
| Značka | Vissani |
| Informace o modelu | QR254S |
| Rozměry produktu | 18"H x 29.8"Š x 5"V |
| Hmotnost položky | 22.6 libry |
| Materiál | Nerez |
| Typ dokončení | Kartáčovaný |
| Barva | Nerez |
| Proud vzduchu | 320 kubických stop za minutu |
| Úroveň hluku | 1.5 Sones |
| Typ montáže | Pod Cabinet Mount |
| Zahrnuté komponenty | Uhlíkový filtr |
| Typ ovládacích prvků | Stiskněte tlačítko |
| Typ světelného zdroje | LED |
| Wattage | 1E+1 (10W) |
| Typ filtru | Pletivo |
| Typ ventilace | [BOTH] (Ducted/Ductless) |
| UPC | 056677874543 |
Záruka a zákaznická podpora
For warranty information or technical assistance, please contact Vissani customer support. Keep your purchase receipt for warranty claims.
Kontaktní informace lze obvykle nalézt na oficiálních stránkách výrobce webmístě nebo na obalu produktu.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.