BAFANG C965 LCD Display User Manual

1. Úvod

This user manual provides detailed instructions for the installation, operation, and maintenance of your BAFANG C965 LCD Display. This display is designed for use with Bafang Mid Drive motors that utilize the UART communication protocol. Please read this manual thoroughly before using the product to ensure safe and correct operation.

The BAFANG C965 LCD Display offers essential information for your electric bicycle, including speed, battery level, assistance level (PAS), and trip data, enhancing your riding experience.

2. Bezpečnostní informace

• Always ensure the display is securely mounted and all cables are properly connected before riding.
• Do not attempt to open or modify the display unit. This may void the warranty and cause damage.
• Keep the display screen clean and free from obstructions to ensure clear visibility of information.
• Avoid exposing the display to extreme temperatures or direct sunlight for prolonged periods.
• In case of malfunction, refer to the troubleshooting section or contact Bafang support.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• BAFANG C965 LCD Display Unit
• Držák na řídítka
• Jednotka ovládacích tlačítek
• Uživatelská příručka (tento dokument)

4. Nastavení a instalace

Follow these steps to install your BAFANG C965 LCD Display:

1. Montáž displeje: Attach the handlebar mounting bracket to your bicycle's handlebar. The bracket is compatible with handlebar diameters of 22.2mm, 25.4mm, and 31.8mm. Secure the C965 display unit into the bracket.
2. Propojovací kabely: Connect the 5-pin female connector from the display unit to the corresponding male connector on your Bafang Mid Drive motor system. Ensure the connection is firm and secure.
3. Mounting Control Buttons: Position the external control button unit on your handlebar within easy reach. Connect its cable to the display unit.

Figure 1: Bafang C965 LCD display unit with cables and mounting bracket.

Figure 2: Bafang C965 LCD display mounted on an e-bike handlebar.

5. Návod k obsluze

Once installed, operate your BAFANG C965 LCD Display as follows:

• Zapnutí/vypnutí: Press and hold the power button on the external control unit to turn the display on or off.
• Nastavení úrovně PAS: Use the '+' and '-' buttons on the control unit to increase or decrease the Pedal Assist System (PAS) level.
• Informační displej: The display cycles through various information screens. Use the 'M' (Mode) button to switch between different data views such as trip distance, total distance, average speed, max speed, and time.
• Ovládání světlometů: If your e-bike system supports it, a dedicated button or a long press of a specific button (refer to your motor's manual) may control the headlights.

Figure 3: Bafang C965 LCD display showing active riding data.

6. Display Functions and Indicators

The C965 display provides various indicators and data points:

• Zobrazení rychlosti: Shows current speed, average speed (AVG), and maximum speed (MAX).
• Indikátor baterie: Zobrazuje zbývající úroveň nabití baterie.
• Úroveň PAS: Indicates the current pedal assist level (0-9 or 0-3, depending on configuration).
• Ukazatel najetých kilometrů: Zobrazuje vzdálenost a celkový stav počítadla kilometrů.
• Indikátor napájení: Displays real-time motor power output.
• Čas: Current time or trip duration.
• Indikátor brzdy: Illuminates when brakes are applied.
• Indikátor chyby: Displays error codes if a system fault occurs.
• Headlight Power On: Indicates when the e-bike's headlights are active.

Figure 4: Bafang C965 LCD display icons and basic specifications.

7. Údržba

To ensure the longevity and optimal performance of your C965 display:

• Čištění: Otřete displej a tělo měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Voděodolnost: The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. Avoid submerging the unit in water.
• Teplota: Operate the display within its specified temperature range of -20°C to 60°C.
• Kontrola kabelů: Pravidelně kontrolujte všechny kabely a konektory, zda nevykazují známky opotřebení nebo poškození.

8. Řešení problémů

If you encounter issues with your BAFANG C965 LCD Display, consider the following:

• Displej se nezapíná:
  • Ujistěte se, že je baterie elektrokola nabitá a správně připojená.
  • Check all cable connections between the display, control unit, and motor for looseness or damage.
  • Ověřte, zda je tlačítko napájení správně stisknuto.
• Nesprávné údaje o rychlosti/vzdálenosti:
  • Zkontrolujte snímač rychlosti a magnet na kole, zda jsou správně seřízené a čisté.
  • Ensure the wheel circumference setting in the display's advanced settings (if accessible) is correct.
• Zobrazené chybové kódy:
  • Refer to your Bafang motor's specific error code list for detailed explanations and solutions. Common issues include motor, controller, or sensor faults.
  • Often, turning the system off and on again can clear temporary errors.
• Tlačítka nereagují:
  • Check the connection of the external control button unit to the display.
  • Ensure buttons are not physically stuck.

If problems persist after attempting these steps, contact Bafang customer support or your authorized dealer for assistance.

9. Specifikace

10. Záruka a podpora

BAFANG products are typically covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For technical support, warranty inquiries, or spare parts, please contact your original retailer or visit the official BAFANG webstránky s kontaktními informacemi zákaznického servisu.