AURLANE FAC350 Shower Screen Instruction Manual

1. Úvod

Děkujeme, že jste si vybrali A.URLANE FAC350 Shower Screen. This manual provides detailed instructions for the safe and correct installation, operation, and maintenance of your new shower screen. Please read this manual thoroughly before beginning installation and keep it for future reference.

Obrázek 1: AURLANE FAC350 Shower Screen. This image shows the shower screen featuring a black matte aluminum frame and a clear tempered glass panel, designed for modern bathroom aesthetics.

2. Bezpečnostní informace

Během instalace a používání vždy dodržujte následující bezpečnostní opatření:

• Během instalace používejte vhodné osobní ochranné prostředky (OOP), jako jsou ochranné brýle a rukavice.
• Handle glass panels with extreme care to prevent breakage and injury. Tempered glass, while strong, can shatter into small pieces if damaged at the edges.
• Ensure the installation surface (wall) is structurally sound and capable of supporting the weight of the shower screen (approximately 32 kg).
• Use only the provided hardware or suitable alternatives recommended by the manufacturer.
• Do not overtighten screws, as this can damage components.
• Udržujte děti a domácí zvířata mimo dosah místa instalace.
• Pokud si nejste jisti některou částí instalačního procesu, poraďte se s kvalifikovaným odborníkem.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené:

• 1 x Shower Screen Wall (FAC350)
• Hliníkový rám profiles (black matte finish)
• Tempered glass panel (5 mm thick, upper part of door)
• Aluminum composite panel (5 mm thick, lower part of door)
• Metal handle (black matte finish)
• Magnetický uzavírací mechanismus
• Mounting hardware (screws, wall plugs, seals)

4. Nastavení a instalace

AURLANE FAC350 shower screen features a reversible design for flexible installation. Follow these steps carefully:

4.1. Příprava

1. Unpack all components and inspect them for any damage.
2. Ujistěte se, že místo instalace je čisté, suché a rovné.
3. Gather necessary tools: drill, spirit level, measuring tape, screwdriver, silicone sealant, pencil.

4.2. Wall Profile Instalace

4. Umístěte stěnu profiles against the wall at the desired location. Use a spirit level to ensure they are perfectly vertical.
5. Mark the drilling points through the pre-drilled holes in the profiles.
6. Vyvrtejte otvory v označených bodech a vložte do nich příslušné hmoždinky.
7. Zajistěte stěnu profiles to the wall using the provided screws. The profiles are adjustable by +/- 1 cm to accommodate slight variations.

4.3. Door Assembly and Mounting

8. Assemble the swing door, which consists of an upper tempered glass part and a lower aluminum composite part, within the black matte aluminum frame.
9. Attach the metal handle to the door.
10. Mount the assembled door onto the wall profiles using the hinge mechanism. Ensure the door swings freely and aligns correctly.
11. Install the magnetic closure mechanism to ensure the door closes securely.
12. Apply a waterproof silicone sealant along all exterior joints between the shower screen and the wall/shower tray to prevent leaks. Allow adequate drying time as per sealant instructions.

Note: The shower screen dimensions are 80 x 200 cm, with an adjustable width from 78.5 cm to 80 cm. The door opening is approximately 53 cm.

5. Provoz

AURLANE FAC350 features a swing door design for easy access.

• To open the door, gently pull the black matte metal handle.
• To close the door, push it until the magnetic closure engages, ensuring a secure seal.
• Always ensure the door is fully closed before operating the shower to prevent water leakage.

6. Údržba

Regular cleaning and maintenance will prolong the life and appearance of your shower screen.

• Čištění skla: Use a soft cloth and a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive sponges that can scratch the glass or damage the frame finish.
• Čisticí rám: Wipe the black matte aluminum frame with a soft, damp cloth. For stubborn stains, use a mild, non-abrasive cleaner specifically designed for aluminum.
• těsnění: Regularly check the silicone seals for any signs of wear or mold. Clean with appropriate bathroom cleaner. Reapply sealant if necessary to maintain watertight integrity.
• Hinges and Moving Parts: Periodically check hinges and the magnetic closure for proper function. If they become stiff, a small amount of silicone-based lubricant can be applied, avoiding contact with glass.
• Vyhněte se: Do not use acidic, alkaline, or abrasive cleaning agents, as these can damage the finish and materials.

7. Řešení problémů

8. Specifikace