Glovii GEG Heated Universal Gloves User Manual

Zavedení

Glovii heated clothing provides thermal comfort in cold conditions. These products utilize heated carbon fibers to promote blood circulation through infrared waves. Designed for various outdoor activities and professions, these gloves offer warmth and functionality.

Nastavení

1. Nabíjení baterie

Before first use, fully charge the provided Li-Ion battery using a USB 5V, 1A charger (not included). The battery has a built-in energy gauge to indicate charge status.

2. Vložení baterie

1. Locate the zippered pocket on the cuff of each glove.
2. Connect the glove's internal cable to the fully charged battery.
3. Carefully place the battery into the pocket and close the zipper securely.

Image: The glove's internal cable connected to the battery, ready for insertion into the pocket.

Image: The battery being carefully placed into the zippered pocket on the glove cuff.

Image: The battery fully secured inside the glove pocket with the zipper closed.

Návod k obsluze

1. Powering On and Adjusting Heat Levels

The control button is located on the back of the glove cuff.

Obrázek: Detailní záběr view of the power and heat level control button located on the back of the glove cuff.

• Zapnutí: Press and hold the control button for a few seconds until the indicator light illuminates.
• Nastavení úrovně tepla: Briefly press the control button to cycle through the heat modes:
  • LO (33%): Lowest heat setting.
  • MED (66%): Nastavení na střední teplotu.
  • HI (100%): Highest heat setting.
• Vypnutí: Press and hold the control button for a few seconds until the indicator light turns off.

2. Heating Element Location

The carbon fiber heating element is strategically placed around all fingers to ensure comprehensive warmth.

3. Touch Screen Compatibility

These gloves are designed to work with touch screens, allowing you to operate devices without removing your gloves.

Údržba

Pokyny pro čištění

To ensure the longevity of your heated gloves, follow these care instructions:

• Pouze ruční mytí: Do not machine wash, tumble dry, or dry clean.
• Before washing, ensure the battery is removed from the glove pocket.
• Use mild soap and cold water. Gently hand wash the gloves.
• Rinse thoroughly and air dry completely before reconnecting the battery or storing. Do not wring or twist.

Skladování

When not in use, store the gloves and battery in a cool, dry place. Ensure the battery is partially charged (around 50%) if storing for extended periods to maintain battery health.

Odstraňování problémů

• Rukavice se nezahřívají:
  • Ujistěte se, že je baterie plně nabitá.
  • Verify that the battery is correctly connected to the glove's internal cable.
  • Confirm the gloves are powered on and a heat level is selected.
• Baterie se nenabíjí:
  • Check the USB charger and cable for damage.
  • Ensure the charger meets the specified output (USB 5V, 1A).
• Nerovnoměrné vytápění:
  • This is unlikely due to the carbon fiber heating element. If experienced, ensure the gloves are worn correctly and contact support if the issue persists.

If you encounter issues not listed here, please refer to the manufacturer's support channels.

Specifikace

Záruka a podpora

Informace týkající se záruky na produkt a zákaznické podpory nejsou v této příručce uvedeny. Obraťte se prosím na oficiální informace výrobce. website or contact your retailer for details on warranty coverage and support services.