1. Úvod
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the Malcayang Right Hand Drive (RHD) Power Window Switch, part number 93571-4H110. This product is designed as an aftermarket replacement for specific Hyundai vehicle models. Please read this manual thoroughly before proceeding with installation or use.
Důležité: This switch is specifically for Right Hand Drive vehicles. Verify your vehicle's drive configuration before installation.
2. Bezpečnostní informace
- Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage to components.
- Používejte vhodné osobní ochranné prostředky, jako jsou ochranné brýle a rukavice.
- Ujistěte se, že je vozidlo zaparkované na rovném povrchu se zataženou parkovací brzdou.
- Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným automechanikem.
- Udržujte děti a domácí zvířata mimo pracovní oblast.
3. Konec produktuview
The Malcayang Power Window Switch (OEM Part Number: 93571-4H110, Manufacturer Part Number: E0625) is a replacement component for the master power window control on compatible Hyundai models. It features controls for all windows and a door lock function.
Obrázek 3.1: Přední strana view of the Malcayang RHD Power Window Switch. Shows the main window control buttons, including 'AUTO DOWN', and the door lock/unlock button.
Obrázek 3.2: Úhlové view of the power window switch, highlighting the overall form factor and button layout.
Obrázek 3.3: Zadní view of the power window switch, showing the electrical connector pins. Ensure this matches your vehicle's existing connector.
Kompatibilita:
- Hyundai H1 (2007-2016)
- Hyundai H-1 (2007-2016)
- Hyundai Starex (2007-2016)
- Hyundai i800 (2007-2016)
- Hyundai Grand iMax (2007-2016)
Note: Compatibility information is for reference only. Different parts may be used for the same year/model. Always verify the OE number (93571-4H110) and visually compare the switch with your original part, paying close attention to appearance and terminal/pin configuration, before installation. If uncertain, provide your Vehicle Identification Number (VIN) to a qualified technician for verification.
4. Nastavení a instalace
This section outlines the general steps for replacing a power window switch. Specific procedures may vary slightly depending on your vehicle's exact configuration. Refer to your vehicle's service manual for detailed instructions.
- Připravte vozidlo: Park the vehicle on a level surface, engage the parking brake, and turn off the ignition. Disconnect the negative terminal of the vehicle's battery to prevent electrical hazards.
- Přístup k přepínači: The power window switch is typically integrated into the door panel. You may need to carefully pry off a trim piece or remove screws to access the switch assembly. Use appropriate trim removal tools to avoid damaging interior components.
- Odpojte starý spínač: Once the switch assembly is accessible, carefully disconnect the electrical connector(s) by pressing any release tabs. Then, remove the old switch from its housing.
- Instalace nového přepínače: Position the new Malcayang power window switch (93571-4H110) into the door panel housing. Ensure it seats correctly and securely.
- Připojení elektrických zařízení: Reconnect the electrical connector(s) to the new switch. Ensure the connection is firm and secure.
- Test funkčnosti: Before fully reassembling the door panel, reconnect the vehicle's battery. Turn the ignition to the 'ON' position (do not start the engine) and test all window functions (up/down for all windows) and the door lock/unlock function.
- Znovu sestavte panel dveří: If the switch functions correctly, reassemble any removed trim pieces and secure any screws. Ensure all components are properly aligned and fastened.
- Závěrečná kontrola: Perform a final check of all window and lock functions.
Obrázek 4.1: Přample of a power window switch installed in a Right Hand Drive vehicle's door panel. Note the position relative to the driver.
Figure 4.2: Visual comparison illustrating the difference between Left Hand Drive (LHD) and Right Hand Drive (RHD) master power window switches. This product is RHD.
5. Návod k obsluze
The Malcayang Power Window Switch operates identically to the original equipment manufacturer (OEM) switch it replaces.
- Ovládání oken: To lower a window, press down on the corresponding switch button. To raise a window, pull up on the corresponding switch button.
- Auto Down Function: The driver's side window switch features an "AUTO DOWN" function. A single, firm press down on this button will fully lower the driver's window without needing to hold the button. To stop the window mid-descent, briefly press the button again.
- Zamykání/odemykání dveří: The dedicated lock button (often marked with a padlock icon) controls the central locking system for the vehicle's doors. Press to lock, press again to unlock (functionality may vary slightly based on vehicle model).
- Zámek okna: If present, the window lock button (often marked with a window icon and a lock symbol) disables the passenger window controls, allowing only the driver to operate them.
6. Údržba
The power window switch is a sealed unit and generally requires no routine maintenance. However, to ensure longevity and proper function:
- Keep the switch clean and free from dust, dirt, and liquid spills. Use a soft, dry cloth for cleaning.
- Avoid excessive force when operating the buttons.
- If any liquids are spilled on the switch, disconnect the battery immediately and allow the switch to dry completely before reconnecting power.
7. Řešení problémů
If you experience issues with your power window switch, consider the following troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Window does not move | Blown fuse, faulty window motor, wiring issue, window lock engaged. | Check vehicle's fuse box for a blown fuse and replace if necessary. Ensure window lock is disengaged. If problem persists, consult a technician for motor or wiring diagnosis. |
| Window moves slowly or intermittently | Weak motor, dirty window tracks, wiring issue. | Clean and lubricate window tracks. Check for loose wiring connections. If problem persists, motor may need replacement. |
| Door locks do not respond | Blown fuse, faulty central locking module, wiring issue. | Check vehicle's fuse box. Consult a technician for further diagnosis. |
| Only driver's window works | Window lock button engaged. | Disengage the window lock button on the master switch. |
If these steps do not resolve the issue, it is recommended to seek assistance from a certified automotive technician.
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Malcayang |
| Číslo dílu OEM | 93571-4H110 |
| Číslo dílu výrobce | E0625 |
| Provozní režim | Moc |
| Typ kontaktu | Normálně otevřeno |
| Typ konektoru | Rychlé připojení |
| Typ obvodu | 2-cestný |
| Kontaktní materiál | Nerez |
| Hodnocení mezinárodní ochrany | IP00 |
| Počet pozic | 1 |
| Kontrolní metoda | Dotek |
| Barva | Černý |
| Rozměry položky (D x Š x V) | 2.76 x 2.36 x 4.72 palce |
| Hmotnost položky | 5.6 unce |
9. Záruka a podpora
This Malcayang Power Window Switch comes with a 1 rok záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé při běžném používání.
The warranty does not cover damage resulting from improper installation, misuse, accident, neglect, or unauthorized modification.
For warranty claims or technical support, please contact your retailer or the Malcayang customer service department with your purchase details and the product's OEM part number (93571-4H110) or manufacturer part number (E0625).
For additional information or to explore other Malcayang products, visit the official Malcayang Store.