Edifier T5

Uživatelská příručka k aktivnímu subwooferu Edifier T5

Model: T5 | Brand: Edifier

Konec produktuview

The Edifier T5 Powered Subwoofer is designed to enhance your audio experience by delivering powerful and accurate bass. Featuring an 8-inch driver and a low-pass filter, it integrates seamlessly with your existing speaker system to reproduce low-frequency sounds that your main speakers might miss.

Edifier T5 Powered Subwoofer, front view with silver faceplate and black wooden enclosure.

Obrázek: Přední strana view of the Edifier T5 Powered Subwoofer, showcasing its 8-inch driver and robust enclosure.

Klíčové vlastnosti:

  • 8-inch Speaker Driver: Delivers powerful sound with highly accurate bass for an improved listening experience.
  • Nízkopropustný filtr (LPF): Ensures the subwoofer only plays frequencies too low for your main speakers, with a frequency response down to 38Hz.
  • Thick MDF Wooden Enclosure: Constructed from high-quality, dense fiberboard to reduce acoustic resonance and improve audio quality.
  • Automatický pohotovostní režim: An energy-saving feature that puts the subwoofer into standby mode when not in use.
  • Robustní kvalita provedení: Designed for durability and superior performance, ensuring long-lasting reliability.

Video: An official product video from Edifier showcasing the T5 Powered Subwoofer's design and features, including its controls and driver movement.

Průvodce nastavením

1. Vybalení a obsah

Carefully remove the subwoofer from its packaging. Ensure all components are present:

  • Edifier T5 Subwoofer Unit
  • Napájecí kabel
  • Audio kabel 3.5 mm na RCA
  • RCA to RCA Audio Cable
  • Uživatelská příručka (tento dokument)
Diagram showing the Edifier T5 subwoofer and included cables: power cable, 3.5mm to RCA, and RCA to RCA audio cable.

Image: Illustration of the Edifier T5 subwoofer and its accompanying cables, including the power cable, 3.5mm to RCA, and RCA to RCA audio cable.

2. Umístění

Optimal placement of the subwoofer can significantly impact sound quality. Consider the following:

  • Place the subwoofer on a stable, flat surface, preferably on the floor.
  • Experiment with different locations in your room. Corners often provide the most bass reinforcement, but can sometimes lead to boomy sound. Placing it near your main speakers can improve sound integration.
  • Ensure there is adequate space around the subwoofer, especially for the side-firing port, if applicable, to allow for proper air movement.
Dimensions of the Edifier T5 subwoofer: 10.94 inches wide, 11.81 inches deep, and 13.22 inches high.

Image: Diagram illustrating the physical dimensions of the Edifier T5 subwoofer, showing its width, depth, and height.

Detailní záběr view of the side-firing bass reflex port on the Edifier T5 subwoofer.

Obrázek: Podrobný view of the bass reflex port located on the side of the Edifier T5 subwoofer.

3. Připojení

The Edifier T5 offers flexible connection options. Choose the method that best suits your audio setup:

  • Method 1 (Direct to Speakers with RCA Output): If your main speakers have an RCA output (e.g., "SUB OUT" or "LINE OUT"), connect the subwoofer directly to them using an RCA to RCA audio cable.
  • Method 2 (Pass-Through Connection): If your source device (e.g., TV, gaming console, PC) has RCA outputs, you can connect it to the subwoofer's "Signal In" ports, and then connect the subwoofer's "Signal Out" ports to your main speakers. This allows the subwoofer to process the low frequencies before sending the full range signal to your speakers.
Diagram illustrating two connection methods for the Edifier T5 subwoofer: Method 1 shows direct connection to speakers with RCA output, and Method 2 shows a pass-through connection from a source device to the subwoofer, then to speakers.

Image: Visual guide demonstrating two common ways to connect the Edifier T5 subwoofer to an audio system, including direct and pass-through configurations.

After connecting the audio cables, plug the power cable into the subwoofer and then into a wall outlet.

Návod k obsluze

Ovládací prvky a úpravy

The Edifier T5 features controls on its rear panel for fine-tuning its performance:

  • Volič hlasitosti: Adjusts the overall output level of the subwoofer. Start with a low setting and gradually increase to blend with your main speakers.
  • LPF (Low Pass Filter) Dial: Controls the crossover frequency, determining the maximum frequency the subwoofer will reproduce. Adjust this to match the low-frequency capabilities of your main speakers. A common starting point is around 80-100Hz.
  • Fázový přepínač (0°/180°): Adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings to find the one that provides the most impactful and coherent bass. This often depends on the subwoofer's placement relative to the listening position and main speakers.
  • Vypínač: Zapíná nebo vypíná subwoofer.
Rear panel of the Edifier T5 subwoofer showing the volume dial, LPF dial, phase switch, and RCA input/output ports.

Obrázek: Podrobný view of the rear control panel of the Edifier T5 subwoofer, highlighting the volume, low-pass filter, and phase adjustment dials, along with the input/output connections.

Funkce automatického pohotovostního režimu

The T5 subwoofer is equipped with an automatic standby feature to conserve power. If no audio signal is detected for a period, the subwoofer will enter a low-power standby mode. It will automatically wake up when an audio signal is detected again. This feature helps reduce electricity consumption when the subwoofer is not actively in use.

Údržba

To ensure the longevity and optimal performance of your Edifier T5 subwoofer, follow these maintenance guidelines:

  • Čištění: Use a soft, dry cloth to wipe down the exterior of the subwoofer. Avoid using abrasive cleaners, waxes, or solvents.
  • Větrání: Ensure the subwoofer has adequate ventilation. Do not block the side-firing port or place the unit in an enclosed space without proper airflow.
  • Prostředí: Chraňte subwoofer před přímým slunečním zářením, zdroji tepla, nadměrnou vlhkostí a prachem.
  • Moc: Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.

Odstraňování problémů

If you encounter issues with your Edifier T5 subwoofer, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Žádný zvuk ze subwooferu
  • Napájecí kabel není připojen.
  • Subwoofer není zapnutý.
  • Audio cables incorrectly connected.
  • Zdrojové zařízení nepřehrává zvuk.
  • Hlasitost je příliš nízká.
  • Ujistěte se, že je napájecí kabel bezpečně zapojený.
  • Zapněte vypínač na zadním panelu.
  • Verify all audio connections are correct and secure.
  • Check audio playback on your source device.
  • Increase the volume dial on the subwoofer.
Slabé nebo zkreslené basy
  • LPF setting too low or too high.
  • Nesprávné nastavení fáze.
  • Hlasitost subwooferu je příliš nízká.
  • Špatné umístění.
  • Adjust the LPF dial to find the optimal crossover frequency.
  • Toggle the Phase switch (0°/180°) to see which setting provides better bass integration.
  • Increase the volume dial.
  • Experimentujte s různými umístěními subwooferu v místnosti.
Subwoofer does not wake from standby
  • Input signal too weak.
  • Brief audio signal drop.
  • Increase the output volume from your source device.
  • Zajistěte, aby do subwooferu byl vysílán konzistentní zvukový signál.
  • Consider using an RCA Y-splitter if the signal is consistently low (as suggested by some users for similar issues).

Specifikace

FunkceDetail
Název modeluT5
Typ reproduktoruSubwoofer
Maximální výstupní výkon reproduktoru70 W RMS
Průměr basového reproduktoru8 palce
Low Pass Filter Frequency ResponseAž 38 Hz
Materiál pouzdraThick MDF Wood
Rozměry produktu (D x Š x V)16.5 cm x 13.7 cm x 14 cm
Hmotnost položky19.03 libry (8.65 kg)
BarvaČerný
Technologie připojeníRCA (SUB OUT / Line Out)
Kontrolní metodaManual Dials (Volume, LPF, Phase)
Zdroj napájeníElektrický kabel
Odstup signálu od šumu85 dB
VýrobceEdifier
UPC875674004599

Note: Product appearance may vary slightly between manufacturing batches. Some units may feature a silver faceplate with a black wooden enclosure, while others may have a black faceplate with a black wooden enclosure. Both versions offer identical performance.

Image showing two versions of the Edifier T5 subwoofer, one with a silver faceplate and one with a black faceplate, indicating that either version may be shipped randomly.

Image: Depiction of the two possible aesthetic variations of the Edifier T5 subwoofer, highlighting that either design may be received.

Záruka a podpora

Informace o záruce

The Edifier T5 Powered Subwoofer comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Edifier customer support. You can find contact information on the official Edifier webwebu nebo prostřednictvím prodejce, u kterého jste produkt zakoupili.

Visit the official Edifier store for more information and product registration: Oficiální obchod Edifier

© 2025 Edifier. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.