Zavedení
This manual provides comprehensive instructions for the operation and maintenance of your SMARTRO SC42 Professional Digital Hygrometer. This device is designed to accurately measure indoor temperature and humidity, helping you maintain a comfortable and healthy environment.
Co je v krabici
- 1 x SMARTRO SC42 Digital Hygrometer
- 1 x Uživatelská příručka
Nastavení
Instalace baterie
The SMARTRO SC42 requires 2 x 1.5V AAA batteries (not included). To install, slide open the battery compartment cover located on the back of the device. Insert the batteries according to the polarity markings (+/-) and close the cover securely.
Zadní view of the SMARTRO SC42, highlighting the battery compartment and control buttons.
Možnosti montáže
The device offers multiple placement options for your convenience:
- Výsuvný stojan: Use the built-in stand on the back to place the hygrometer on any flat surface, such as a table or desk.
- Magnetická záda: Two powerful magnets on the back allow you to attach the device to metallic surfaces like refrigerators.
- Wall-Mount Hole: A dedicated hole is provided for hanging the device on a wall using a screw or nail.
Illustration of the three versatile placement options: wall-mount, magnetic attachment, and tabletop stand.
Návod k obsluze
Funkce displeje
The 3.5-inch large HD LCD screen provides clear and easy-to-read digits. The display updates readings every 10 seconds.
- Current Temperature & Humidity: Large digits show the real-time temperature and humidity.
- 24-Hour Max/Min Records: Displays the highest and lowest temperature and humidity recorded over the past 24 hours.
- All-Time Max/Min Records: Shows the highest and lowest temperature and humidity recorded since the last reset or battery installation.
- Trendové šipky: Arrows indicate whether temperature and humidity are rising, falling, or remaining stable.
- Indikátor pohodlí: A colored bar (LOW, OK, HIGH) visually represents the current humidity comfort level.
- LOW: Humidity < 30%
- OK: 30% < Humidity < 50%
- HIGH: Humidity > 50%
The main display showing current readings, 24-hour high/low, and comfort indicator.
Detailní view of the comfort level indicator, showing LOW, OK, and HIGH humidity ranges.
Funkce podsvícení
A simple touch on the top of the device will activate the backlight for 10 seconds, improving readability in low-light conditions. The backlight is not always on to conserve battery life.
Comparison of the display in normal mode versus with the backlight activated.
Temperature Unit Switching (°F/°C)
Use the °C/°F button on the back of the device to switch between Fahrenheit and Celsius temperature units.
Resetting Max/Min Records
The 24-hour and All-time Max/Min records will automatically reset when batteries are installed or replaced. To manually clear the records, press and hold the "UP" button in normal mode.
Kalibrace
The temperature and humidity readings can be manually calibrated to improve data accuracy, especially if product placement or environmental factors impact readings. This product is pre-calibrated from the factory, so no extra calibration is required before initial use.
To access calibration mode:
- Hold the "SET" button for 3 seconds. The humidity display will flash.
- Press "UP" or "DOWN" to correct the humidity display. "CALIBRATED" will appear on the display.
- Press "SET" to confirm the humidity setting. The temperature display will then flash.
- Press "UP" or "DOWN" to correct the temperature display. "CALIBRATED" will appear on the display.
- Press "SET" to confirm the temperature setting.
Poznámka: 10 seconds of inactivity during setting will save adjustments and exit calibration mode. Calibrations will be erased if the batteries are removed.
Official product video demonstrating the features and setup of the SMARTRO SC42 Digital Hygrometer.
Široké aplikace
The SMARTRO SC42 is suitable for various indoor environments where monitoring temperature and humidity is crucial for comfort or specific needs.
- Baby's Room / Nursery
- Kancelář
- Skříň
- Inkubátor
- Greenhouse / Garden
- Vinný sklep
- Basement / Critter Terrarium
- Sklad
- Ložnice
Visual representation of diverse environments where the hygrometer can be effectively used.
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | SC42 |
| Rozměry produktu | 3.4 x 1.18 x 3.4 palce (8.6 x 3 x 8.6 cm) |
| Hmotnost položky | 4.59 uncí (0.13 kg) |
| Teplotní rozsah | -4 °F až 158 °F (-20 °C až 70 °C) |
| Přesnost teploty | ± 0.5 ° C |
| rozsah vlhkosti | 1 % až 99 % RH |
| Přesnost vlhkosti | ±2 % RH |
| Napájení | 2x 1.5V AAA baterie |
| Barva | Černý |
| Země původu | Čína |
Odstraňování problémů
- Žádný displej / Slabý displej: Check if batteries are inserted correctly with proper polarity. Replace batteries if they are low or depleted.
- Nepřesná čtení: Ensure the device is not placed in direct sunlight, near heat sources (like appliances or vents), or in areas with extreme drafts, as these can affect sensor accuracy. Perform manual calibration if necessary.
- Displej se nerozsvítí: Gently touch the top of the device. If the backlight does not activate, check battery levels.
Záruka a podpora
SMARTRO is committed to customer satisfaction. If your device fails to work or you are not completely satisfied with the product, please contact us. We cherish every feedback and comment to improve our products and service.
For support, please refer to the contact information provided in your product packaging or the official SMARTRO webwebu. Můžete také najít verzi uživatelské příručky ve formátu PDF zde.