Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Úvod

Děkuji za nákupasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Bezpečnostní informace

• Vždy udržujte tento výrobek v suchu. Nepoužívejte za deště nebo damp podmínky.
• Nerozebírejte. Pokud je nutná oprava, musí být tento výrobek zaslán do autorizovaného servisního střediska.
• Uchovávejte mimo dosah dětí.
• Nepoužívejte blesk v přítomnosti hořlavých plynů, chemikálií nebo jiných materiálů.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Konec produktuview

3.1 Klíčové vlastnosti

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Výkonné funkce: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Ochrana proti přehřátí: Designed with protection against overheating for extended use.
• Efektivní výkon: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Funkce zoom: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Široká kompatibilita: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Obsah balení

• 1 x Godox TT350N Flash Unit
• 1 x Mini stojan
• 1x Ochranné pouzdro
• 1 x barevný filtr
• 1 x Uživatelská příručka
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Názvy dílů a funkce

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Tlačítko pro výběr režimu
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Testovací tlačítko/indikátor připravenosti blesku
5. LCD panel
6. Tlačítko vysokorychlostní synchronizace
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Vypínač napájení
10. Zamykací kroužek
11. Tlačítko pro výběr bezdrátového připojení (tlačítko pro opakované použití, dlouhé stisknutí po dobu 2 sekund)
12. Hotshoe
13. Tlačítko Nastavit
14. Vyberte možnost Vytočit
15. Přihrádka na baterie
16. Optický řídicí senzor
17. Pomocný paprsek zaostření
18. Blesková hlava
19. Panel Catchlight
20. Vestavěný široký panel

4. Nastavení

4.1 Instalace baterie

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Otevřete kryt přihrádky na baterie, který se nachází na boku blesku.
2. Vložte dvě baterie typu AA podle polarity (+/-) uvnitř přihrádky.
3. Bezpečně zavřete kryt bateriového prostoru.

4.2 Montáž na kameru

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Zapnutí/vypnutí

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Chcete-li přístroj vypnout, přepněte vypínač do polohy „VYPNUTO“.

5. Provozní režimy

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE tlačítko pro procházení dostupných režimů.

5.1 TTL Autoflash Mode

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Stiskněte tlačítko MODE button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Stiskněte tlačítko MODE button until 'M' is displayed.
• Otočte Vyberte možnost Vytočit to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Stiskněte tlačítko MODE button until 'Multi' is displayed.
• Použijte Vyberte možnost Vytočit a SOUBOR button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Vysokorychlostní synchronizace (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Stiskněte tlačítko SYNCHRONIZOVAT button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Kompenzace expozice blesku (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• In TTL mode, press the SOUBOR button. The FEC value will blink.
• Otočte Vyberte možnost Vytočit to adjust the FEC value.
• Stiskněte tlačítko SOUBOR potvrďte opětovným tlačítkem.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Hlavní jednotka: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Podřízená jednotka: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Použijte GR/CH tlačítko a Vyberte možnost Vytočit to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• Režim S1: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• Režim S2: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the OTROK button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Dlouze stiskněte C.Fn button for 2 seconds to enter the custom function settings menu.
• Použijte Vyberte možnost Vytočit to navigate through the available functions.
• Stiskněte tlačítko SOUBOR button to select a function and then use the Vyberte možnost Vytočit změnit jeho hodnotu.
• Stiskněte tlačítko SOUBOR button again to confirm the change.
• Dlouze stiskněte C.Fn button again to exit the custom function settings.

8. Údržba

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Blesk skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
• Avoid strong impacts or dropping the unit.

9. Řešení problémů

• Blesk se neaktivuje: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Problémy s bezdrátovým spouštěním: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Specifikace

11. Záruka a podpora

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webstránky. Uschovejte si prosím doklad o koupi pro případ reklamace.