SECRUI Wireless Doorbell M520+f55 Instruction Manual

1. Úvod

Thank you for choosing the SECRUI Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual carefully before use and retain it for future reference.

2. Konec produktuview

2.1 Komponenty

• 1 x Bezdrátový přijímač zvonku
• 1 x Wireless Doorbell Transmitter (Button)
• 1 x CR2032 Battery (pre-installed in transmitter)
• Mounting Hardware (Screws, Wall Anchors, 3M Adhesive Tape)
• Uživatelská příručka

2.2 Klíčové vlastnosti

• Bezdrátový provoz: Enjoy a stable connection with a long range of up to 300 meters (1000 feet) in open areas.
• Vodotěsný vysílač IP55: Designed for outdoor use, resistant to dust and water splashes, operating reliably in temperatures from -20°C to 60°C.
• Přizpůsobitelné zvonkohry: Vyberte si z 58 různých melodií.
• Nastavitelná hlasitost: 5 levels of volume control, ranging from 0 dB (mute) to 120 dB.
• Funkce paměti: Retains your last selected melody and volume level even after power loss.
• LED indikátor: Visual alert for visitors, useful for noisy environments or hearing-impaired users.
• Dlouhá výdrž baterie: Transmitter battery (CR2032) lasts up to 3 years.
• Rozšiřitelný systém: Easily pair additional receivers (up to 20) with one transmitter, or multiple transmitters with one receiver.

Image: Transmitter features including IP55 waterproof rating, temperature resistance, and battery life.

Image: Receiver highlighting 58 melodies, 5 volume levels, and LED indicator.

3. Specifikace

4. Nastavení a instalace

4.1 Instalace přijímače

1. Unpack the receiver unit.
2. Plug the receiver into a standard wall socket in your desired location. Ensure the socket is easily accessible and not obstructed.
3. Přijímač se rozsvítí a vydá výchozí zvukový signál, což znamená, že je zapnutý a připravený.

Image: Receiver plugged into a wall socket and transmitter mounted on a door.

4.2 Transmitter (Button) Installation

The transmitter can be installed using either the provided 3M adhesive tape or screws.

Method 1: 3M Adhesive Tape

1. Důkladně očistěte požadovaný montážní povrch, aby byl suchý a bez prachu nebo mastnoty.
2. Peel off one side of the protective film from the 3M adhesive tape and attach it to the back of the transmitter.
3. Peel off the other side of the protective film and firmly press the transmitter onto the cleaned surface for at least 30 seconds.

Metoda 2: Montáž šrouby

1. Open the back cover of the transmitter using a small screwdriver or prying tool.
2. Mark the positions for drilling holes on the wall using the back cover as a template.
3. Drill two holes, insert the wall anchors, and then secure the back cover to the wall with the provided screws.
4. Snap the transmitter unit back onto its secured back cover.

Image: Detailed steps for adhesive and screw mounting of the transmitter.

Image: A hand pressing the doorbell button after installation.

5. Návod k obsluze

5.1 Změna melodií

On the side of the receiver, locate the "Melody Selection" button (often indicated by a music note icon). Press this button repeatedly to cycle through the 58 available melodies. The receiver will play each melody as you press the button. Stop pressing when you hear your desired melody.

5.2 Nastavení hlasitosti

On the side of the receiver, locate the "Volume Control" button (often indicated by a speaker icon). Press this button to cycle through the 5 volume levels (0-120 dB). The receiver will play a short sound at each level to indicate the current volume. Select the level that suits your preference.

5.3 Pairing Additional Units (Optional)

If you have purchased additional SECRUI transmitters or receivers, you can pair them with your existing system:

1. Zapojte přijímač, který chcete spárovat.
2. Press and hold the "Volume Control" button on the receiver for approximately 5 seconds until you hear a "ding-dong" sound and the LED indicator flashes rapidly. This indicates pairing mode.
3. Within 10 seconds, press the button on the transmitter you wish to pair. The receiver will chime, confirming successful pairing.
4. Repeat for any additional transmitters or receivers.

Note: The system supports up to 20 transmitters per receiver and one transmitter can control multiple receivers.

6. Údržba

6.1 Čištění

Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components. The transmitter is IP55 waterproof, but avoid submerging it in water.

6.2 Výměna baterie vysílače

When the transmitter button's LED indicator no longer lights up or the range decreases significantly, it's time to replace the battery.

1. Carefully open the back cover of the transmitter using a small screwdriver.
2. Vyjměte starou baterii CR2032.
3. Vložte novou baterii CR2032 kladnou (+) stranou nahoru.
4. Close the back cover securely, ensuring the waterproof seal is properly seated.

Poznámka: Staré baterie zlikvidujte zodpovědně v souladu s místními předpisy.

7. Řešení problémů

8. Záruka a podpora

8.1 Záruka výrobce

This SECRUI Wireless Doorbell is covered by an 18měsíční záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Nevztahuje se na škody způsobené nesprávným použitím, nehodou, neoprávněnou úpravou nebo nesprávnou instalací.

8.2 Zákaznická podpora

If you encounter any issues or have questions regarding your SECRUI Wireless Doorbell, please contact our customer support team. For the fastest service, please have your model number (M520+f55) and purchase details ready.

• E-mail: podpora@secrui.com (Napřampnapř., skutečný e-mail nebyl poskytnut)
• Webmísto: Visit the SECRUI Store on Amazon

9. Videoukázka