Návod k obsluze elektrického stolu pro stání FLEXISPOT EN2

Zavedení

This manual provides detailed instructions for the assembly, operation, and maintenance of your FLEXISPOT EN2 Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. This model features a 48x30 inch maple top and a white frame, designed to enhance your workspace with adjustable height functionality and integrated power solutions.

Bezpečnostní informace

• Exceeding the maximum weight limit of 176 pounds may cause damage or injury. Always adhere to the specified weight limit for safety.
• Proper assembly is required for stability. Ensure all components are securely fastened according to the assembly instructions.
• Place the desk on a stable, level surface to prevent tipping.
• The desk is equipped with overload and overheat protection to prevent undue overuse. Do not attempt to bypass these safety features.
• Během provozu držte děti a domácí zvířata v dostatečné vzdálenosti od stolu, abyste předešli nehodám.
• Ensure there are no obstructions in the desk's path when adjusting height. The anti-collision system is designed to detect obstacles, but caution is always advised.

Obsah balení

Your FLEXISPOT EN2 desk will arrive in two separate packages. Please verify all components are present before beginning assembly.

Image: The desk components are shipped in two separate packages for the desktop and the frame.

• 48x30" Maple Desktop (Whole-piece)
• White Electric Desk Frame
• 6-Button Digital Controller
• Integrated Desk Clamp Power Strip (with 3 AC outlets and 2 USB charging ports)
• Systém pro správu kabelů
• Assembly Hardware and Tools (some tools may not be included, an electric drill is recommended for faster assembly)

Montážní návod

Assembly typically requires two people for ease and safety, especially when handling the desktop and frame. An electric drill (not included) is recommended for quicker assembly of certain components.

1. Rozbalte komponenty: Carefully remove all parts from both packages and lay them out on a clean, soft surface to prevent scratches. Verify all items listed in the 'Package Contents' section are present.
2. Sestavení rámu stolu: Follow the detailed instructions provided in the separate assembly guide for connecting the desk legs, crossbars, and feet. Ensure all screws are tightened securely.
3. Připojit plochu: Carefully place the desktop upside down on a soft surface. Position the assembled desk frame onto the desktop, aligning the pre-drilled holes. Secure the desktop to the frame using the provided screws.
4. Install Controller and Power Strip: Mount the 6-button digital controller and the clamp power strip to the underside or edge of the desktop as desired. The power strip can be clipped to the back or side.
5. Připojení kabeláže: Connect all motor and controller cables according to the wiring diagram in the assembly guide. Ensure connections are firm.
6. Správa kabelů: Utilize the included cable management system to organize and secure all wires, preventing tangles and ensuring a tidy workspace.
7. Otočte stůl: With assistance, carefully flip the assembled desk upright and place it in its desired location.

Image: Effective cable management transforms a cluttered workspace into an organized one.

Návod k obsluze

Your FLEXISPOT EN2 desk features an intuitive digital controller for easy height adjustments and memory presets.

Digital Controller Functions

Image: The digital controller allows for precise height adjustments and saving preferred positions.

• Tlačítka nahoru/dolů (▲ / ▼): Press and hold these buttons to smoothly adjust the desk height. The desk adjusts from 28.1 inches to 45.7 inches. Release the button at your desired height. The motor operates quietly, typically below 50 dB.
• Předvolby paměti (1, 2, 3, 4): To save a preferred height, adjust the desk to the desired position, then press the 'M' button (if present, or a similar 'Set' button) followed by one of the numbered preset buttons (1-4). To recall a saved height, simply press the corresponding numbered button.
• Protikolizní systém: The desk is equipped with a smart anti-collision system. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage or injury.

Integrovaný prodlužovací kabel

Obrázek: Clamp power strip provides convenient access to power and USB charging.

The removable desktop power outlet provides convenient access to power for your devices.

• It includes 3 AC outlets (125V/12A) and 2 USB charging ports (5V/2A).
• The power strip can be clipped to the back or side of your desk.
• Ensure the power strip is securely clamped and connected to a wall outlet before use.

Údržba

• Čištění: Otřete pracovní plochu a rám měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani agresivní chemikálie, které by mohly poškodit povrchovou úpravu.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Správa kabelů: Ensure cables remain neatly organized and are not pinched or tangled, which could affect desk operation or damage wires.
• Péče o motor: The motor is designed for durability. Avoid overloading the desk or operating it continuously for extended periods without rest to prevent overheating.

Odstraňování problémů

If you encounter issues with your FLEXISPOT EN2 desk, refer to the following common solutions:

• Stůl se nehýbe:
  • Check if the power cord is securely plugged into both the desk and a working wall outlet.
  • Ensure all cables connecting the motor, controller, and power supply are firmly attached.
  • Try plugging the desk into a different power outlet to rule out an issue with the original outlet.
  • If an error code is displayed on the controller, consult the full product manual or contact customer support for specific instructions.
• Nerovnoměrný pohyb nebo hluk:
  • Verify that the desk is placed on a level surface.
  • Zkontrolujte, zda se pod nohama stolu nebo kolem něj nenacházejí nějaké překážky.
  • Ujistěte se, že jsou všechny montážní šrouby utažené.
• Časté spouštění protikolizního systému:
  • Ensure there are no objects near the desk that could be mistaken for an obstruction during movement.
  • The sensitivity of the anti-collision system may be adjustable in advanced settings (refer to the full manual if available).

Pokud tyto kroky problém nevyřeší, kontaktujte prosím zákaznickou podporu FLEXISPOT.

Specifikace

Image: Key dimensions and features of the FLEXISPOT EN2 desk.

Záruka a podpora

FLEXISPOT provides comprehensive warranty coverage for your EN2 Electric Standing Desk:

• 5-letá záruka: Zahrnuje rámy, motory a další mechanická zařízení.
• 2-letá záruka: Zahrnuje ovladače, spínače a elektroniku.

For warranty claims, technical support, or any questions not covered in this manual, please contact FLEXISPOT customer service through their official website or the retailer where the product was purchased. Please have your model number (EN2) and proof of purchase ready.