Uživatelská příručka pro Marine Digital Media Receiver Hertz HMR-10

Zavedení

The Hertz HMR-10 is a marine-grade digital media receiver designed for audio entertainment on boats and other marine vehicles. It features AM/FM radio, USB input, and Bluetooth connectivity, allowing you to stream music from your devices. Its compact gauge-style design integrates seamlessly into marine dashboards. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your HMR-10 receiver.

Konec produktuview

Nastavení a instalace

Proper installation is crucial for the performance and longevity of your HMR-10 receiver. It is recommended to have this unit installed by a qualified marine audio technician.

Úvahy o montáži

• Způsob montáže: The HMR-10 uses a U-Bracket mounting system.
• Mounting Holes Size: 89.5 mm (3.52 inches) diameter.
• Montážní hloubka: 72 mm (2.83 inches) is required behind the mounting surface.
• Velikost jednotky: Diameter 113 mm (4.45 inches) x Depth 96.5 mm (3.79 inches).
• Ensure the mounting location is protected from direct water exposure and excessive heat.
• Allow sufficient space for wiring connections at the rear of the unit.

Wiring Diagram (Refer to Figure 2)

Connect the wiring harness according to the following guidelines. Always disconnect the boat's battery before making any electrical connections.

• Napájení (žlutá): Connect to a constant 12V power source (battery positive).
• Pozemní (černá): Connect to a good chassis ground point.
• Accessory/Ignition (Red): Připojte k přepínatelnému zdroji napájení 12 V (např. spínač zapalování).
• Speaker Outputs (Colored Pairs): Connect to your marine speakers. Ensure correct polarity. The HMR-10 provides 50W x 4 output at 4 Ohms.
• RCA Outputs (Red/White): Pro připojení k externímu amplifiers (Front, Rear, Subwoofer if applicable).
• Vstup USB: Pro připojení paměťových zařízení USB.
• Vstup AUX: Pro připojení externích audio zdrojů přes 3.5mm jack.

Návod k obsluze

Basic Controls (Refer to Figure 1)

• Tlačítko napájení (⏻): Stisknutím zapnete / vypnete jednotku.
• Volume Up/Down (VOL + / VOL -): Nastavuje výstupní úroveň zvuku.
• Zdroj (SRC): Cycles through available audio sources (FM, AM, USB, Bluetooth, AUX).
• Band (BAND): In radio mode, switches between FM and AM bands.
• Seek/Track Buttons (⏮ / ⏴):
  • In radio mode: Short press to seek next/previous station.
  • In USB/Bluetooth mode: Short press to skip to next/previous track.
  • Long press for fast forward/rewind (USB only).
• Přehrát/Pozastavit (⏸): In USB/Bluetooth mode, plays or pauses playback.
• AS (Auto Store): In radio mode, long press to automatically scan and store strong stations.

Provoz Bluetooth

1. Stiskněte tlačítko SRC button to select "Bluetooth" mode.
2. Na svém mobilním zařízení povolte Bluetooth a vyhledejte dostupná zařízení.
3. Select "Hertz HMR-10" from the list to pair.
4. Once paired, you can stream audio from your device to the HMR-10. Use the seek/track and play/pause buttons on the HMR-10 or your device to control playback.

USB přehrávání

1. Vložte paměťové zařízení USB do portu USB.
2. Stiskněte tlačítko SRC tlačítko pro výběr režimu „USB“.
3. Jednotka automaticky začne přehrávat kompatibilní audio files.
4. Use the seek/track and play/pause buttons to control playback.

Pomocný vstup

1. Connect your external audio device (e.g., MP3 player) to the AUX input using a 3.5mm audio cable.
2. Stiskněte tlačítko SRC tlačítko pro výběr režimu „AUX“.
3. Audio from your connected device will now play through the HMR-10. Control playback directly from your external device.

Údržba

To ensure the longevity and optimal performance of your Hertz HMR-10 marine receiver, follow these maintenance guidelines:

• Čištění: Použijte měkký, damp cloth to wipe down the unit's exterior. Avoid abrasive cleaners, solvents, or harsh chemicals, as they can damage the finish or internal components.
• Vystavení vodě: While designed for marine environments, avoid direct high-pressure water spray. Ensure all covers and caps for USB/AUX ports are securely closed when not in use to prevent water ingress.
• Spojení: Periodically check all wiring connections for corrosion or looseness. Clean any corroded terminals and ensure connections are secure.
• Skladování: If the boat is stored for an extended period, especially in harsh conditions, consider covering the unit or removing it if possible to protect it from extreme temperatures and moisture.

Odstraňování problémů

Specifikace

Záruka a podpora

Hertz products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Hertz webmísto.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Hertz customer service or your authorized Hertz dealer. You can find contact information on the official Hertz webmísto: www.hertzaudiovideo.com

Please have your product model number (HMR-10) and purchase details ready when contacting support.