Zavedení
Thank you for choosing the Audibax Onyx 130 Plus White Double-Braced Keyboard Stand. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new keyboard stand. Please read these instructions carefully before use and retain them for future reference.
Bezpečnostní informace
- Ensure all components are securely fastened before placing any instrument on the stand.
- Nepřekračujte maximální nosnost 65 kg.
- Always adjust the height with care, ensuring the locking mechanism is fully engaged.
- Během nastavování držte ruce a prsty v dostatečné vzdálenosti od pohyblivých částí, abyste zabránili jejich skřípnutí.
- Umístěte stojan na stabilní, rovný povrch, aby se nepřevrátil.
Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Audibax Onyx 130 Plus White Keyboard Stand (main frame)
- Upper support arms (pre-attached or separate)
- Lower support feet (pre-attached or separate)
- Allen key (if required for assembly)
- Uživatelská příručka
Pokyny pro nastavení
The Audibax Onyx 130 Plus keyboard stand is designed for quick and easy assembly, typically within 10 minutes.
- Rozložte stojan: Carefully unfold the main X-frame structure of the stand.
- Attach Arms (if separate): If the upper and lower support arms are not pre-attached, align them with the designated holes on the main frame. Use the provided Allen key to securely fasten them. Ensure all screws are tightened to prevent wobbling.
- Umístění: Umístěte stojan na rovný, stabilní povrch.
Figure 1: Fully assembled Audibax Onyx 130 Plus White Keyboard Stand.
Obrázek 2: Přední strana view of the keyboard stand, showing the double-braced design.
Návod k obsluze
Nastavení výšky
The stand features an integrated adjustment system with an Easy Lock spherical joint for quick and secure height changes.
- Odemknout: Locate the Easy Lock handle (typically a lever or knob) at the center joint of the X-frame. Loosen or pull the handle to disengage the locking mechanism.
- Upravit výšku: Carefully raise or lower the stand to your desired playing height. The stand can be adjusted up to a maximum height of 97 cm.
- Zámek: Once the desired height is reached, engage the Easy Lock handle to secure the stand firmly in position. Ensure it is fully tightened and stable before placing your instrument.
Figure 3: Detail of the Easy Lock spherical joint for height adjustment.
Placing Your Instrument
The upper and lower arms of the stand are reinforced with non-slip rubber to ensure maximum stability and protection for your keyboard.
- Ensure the stand is locked at the desired height.
- Carefully place your keyboard or digital piano onto the upper support arms.
- Verify that the instrument is centered and stable on the non-slip rubber pads.
Figure 4: Non-slip rubber feet provide stability and floor protection.
Figure 5: Upper support arm with non-slip rubber padding for instrument protection.
Doprava a skladování
This keyboard stand is foldable for easy transport and storage.
- Remove your instrument from the stand.
- Unlock the Easy Lock mechanism.
- Fold the X-frame inwards until it is compact.
- Secure the stand in its folded position if a locking strap or mechanism is present.
Údržba
- Čištění: Otřete stojan měkkým hadříkemamp hadříkem odstraňte prach a nečistoty. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Inspekce: Periodically check all bolts, screws, and the locking mechanism for tightness and proper function. Tighten any loose fasteners.
- Gumové podložky: Ensure the non-slip rubber pads on the arms and feet are intact and not worn, as this affects stability and instrument protection.
- Skladování: Store the stand in a dry environment when not in use.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stojan je vratký nebo nestabilní. | Loose fasteners; uneven surface; locking mechanism not fully engaged. | Tighten all bolts and screws. Move stand to a level surface. Ensure the Easy Lock handle is fully engaged and tightened. |
| Obtížnost nastavení výšky. | Locking mechanism is too tight or jammed. | Ensure the Easy Lock handle is fully loosened. Check for any obstructions in the adjustment mechanism. Do not force adjustment. |
| Instrument slides on the stand. | Worn or missing non-slip rubber pads; stand not level. | Inspect and replace worn rubber pads if necessary. Ensure the stand is on a level surface. |
Specifikace
- Model: Onyx 130 Plus
- Číslo modelu: 10154055
- Značka: Audibax
- Barva: Bílý
- Materiál: Slitina oceli
- Hmotnost položky: 4.75 kg
- Rozměry položky (DxŠxV): 102 x 7 x 50 cm (složený)
- Maximální výška: 97 cm
- Kapacita zatížení: 65 kg
- Požadovaná montáž: Ano
- Země původu: Čína
Záruka a podpora
For warranty information, please refer to the terms and conditions provided by your retailer or the point of purchase. Audibax products are designed for durability and performance.
If you encounter any issues or require technical assistance, please contact Audibax customer support or your authorized dealer. Contact information can typically be found on the official Audibax webwebu nebo prostřednictvím svého prodejce.