ASHATA Electric Chain Saw Attachment Set Instruction Manual

1. Úvod

This manual provides essential instructions for the safe and effective use of your ASHATA Electric Chain Saw Attachment Set. This attachment converts a standard angle grinder into a functional electric chainsaw, suitable for various woodworking tasks. Please read this manual thoroughly before assembly and operation to ensure proper usage and safety.

Image 1.1: The Electric Chain Saw Attachment Set transforms an angle grinder into a chainsaw.

2. Bezpečnostní pokyny

Při práci s elektrickým nářadím vždy upřednostňujte bezpečnost. Nedodržení těchto pokynů může vést k vážnému zranění nebo poškození majetku.

• Read the Angle Grinder Manual: Before using this attachment, thoroughly read and understand the instruction manual for your specific angle grinder.
• Používejte osobní ochranné prostředky (OOP): Always wear safety glasses, hearing protection, gloves, and sturdy footwear. Consider a face shield and leg protection.
• Zajištění obrobku: Ensure the material you are cutting is stable and securely supported to prevent kickback.
• Udržujte pevný úchop: Během práce držte nástroj vždy pevně oběma rukama.
• Vyčistěte pracovní oblast: Keep the work area free of obstructions, bystanders, and pets.
• Před použitím zkontrolujte: Before each use, check the chain for sharpness and tension, and ensure all components are securely fastened.
• Odpojit napájení: Always disconnect the angle grinder from the power source before making any adjustments, changing accessories, or performing maintenance.
• Vyhněte se mokrým podmínkám: Nepracujte s nářadím ve vlhku nebo damp podmínky.
• Správné větrání: Pracujte v dobře větraném prostoru.

3. Obsah balení

Po otevření balení ověřte, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

• Chainsaw Guide Bar (11.5 inches)
• Řetězová pila řetěz
• Chainsaw Stand/Mounting Bracket
• U-Shaped Handle
• Ochranná přepážka
• Drive Gear/Sprocket
• Montážní materiál (šrouby, matice, podložky)
• Lubricant Bottle
• Klíč/nářadí pro montáž
• Návod k použití (tento dokument)

Obrázek 3.1: Konecview of the complete attachment kit components.

Image 3.2: Note that new and old models may have slight variations in component design.

4. Nastavení a montáž

Follow these steps carefully to assemble the chainsaw attachment onto your angle grinder. Ensure the angle grinder is unplugged before beginning assembly.

1. Příprava úhlové brusky: Remove the grinding wheel, guard, and any other accessories from your angle grinder.
2. Instalace montážního držáku: Attach the chainsaw stand/mounting bracket to the angle grinder's spindle. Secure it firmly using the provided hardware.
3. Attach Guide Bar: Slide the chainsaw guide bar onto the mounting bracket. Ensure it aligns correctly with the drive gear.
4. Instalace řetězce: Carefully place the chainsaw chain around the guide bar and the drive gear. Ensure the cutting teeth are oriented in the correct direction for cutting.
5. Nastavení napnutí řetězu: Adjust the chain tensioning screw until the chain is snug but can still be pulled freely around the guide bar by hand. The chain should not sag.
6. Mount Protective Baffle: Attach the protective baffle to the designated area on the mounting bracket. This helps prevent sawdust from spattering.
7. Install U-Shaped Handle: Secure the U-shaped handle to the attachment for improved grip and control during operation.
8. Mazat: Add lubricant to the chain oil reservoir (if present) or manually apply chain oil to the chain and guide bar before first use.

Image 4.1: The 11.5-inch chain guide plate is made of high carbon steel for durability.

Image 4.2: The U-shaped handle provides an anti-slip grip, and the wear-resistant metal baffle prevents sawdust spatter.

5. Návod k obsluze

Once assembled and inspected, you can begin using your electric chainsaw attachment. Always follow safety guidelines.

• Zapnutí: Plug in your angle grinder.
• Začněte řezat: With both hands firmly on the handles, engage the angle grinder. Allow the chain to reach full speed before contacting the workpiece.
• Controlled Cuts: Apply steady, even pressure. Do not force the saw through the material. Let the chain do the work.
• Zabraňte zpětnému rázu: Be aware of the kickback danger zone (the tip of the guide bar). Avoid cutting with the tip.
• Dokončovací řez: Support the workpiece to prevent pinching the chain as the cut finishes.
• Vypnout: Release the trigger and allow the chain to stop completely before setting the tool down.

Image 5.1: The attachment is designed for various woodworking tasks, including cutting logs.

Image 5.2: This tool is suitable for forestry cutting, processing household firewood, and general tree trimming.

6. Údržba

Regular maintenance ensures the longevity and safe operation of your chainsaw attachment.

• Mazání řetězu: Regularly add lubricant to the chain to ensure smooth operation and reduce wear.
• Napnutí řetězu: Periodically check and adjust chain tension. A properly tensioned chain should be snug but still movable by hand.
• Ostření řetězu: Keep the chain sharp for efficient and safe cutting. A dull chain can cause kickback and strain the motor.
• Čištění: After each use, clean sawdust and debris from the guide bar, chain, and motor housing (of the angle grinder).
• Skladování: Store the attachment in a dry, secure place, out of reach of children.

Image 6.1: Proper lubrication and chain tension adjustment are crucial for smooth operation.

7. Řešení problémů

Pokud narazíte na problémy, podívejte se na následující běžné problémy a jejich řešení.

• Řetěz se nepohybuje:
  • Check if the angle grinder is powered on.
  • Ensure the chain is not pinched by the workpiece.
  • Verify chain tension is not too tight.
• Špatný řezný výkon:
  • The chain may be dull and requires sharpening.
  • Nedostatečné mazání řetězu.
  • Nesprávné napnutí řetězu.
• Nadměrné vibrace:
  • Ensure all mounting hardware is securely tightened.
  • Check for damaged or bent guide bar/chain.

For issues not listed here, consult the angle grinder's manual or contact customer support.

8. Specifikace

9. Záruka a podpora

For warranty information, technical support, or to purchase replacement parts, please refer to the documentation provided with your original purchase or contact ASHATA customer service through the retailer where the product was acquired.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.