Wendry TCP/IP Network 2-Door Access Control Board User Manual

1. Úvod

This manual provides comprehensive instructions for the installation, configuration, and operation of the Wendry TCP/IP Network 2-Door Access Control Board. This device is designed to manage access for two doors, supporting various authentication methods and advanced security features. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste zabránili poškození zařízení nebo zranění osob:

• Před zahájením jakékoli kabeláže nebo údržby se ujistěte, že je odpojeno napájení.
• Use only the specified power supply (12VDC; 4-7A).
• Nevystavujte zařízení vlhkosti, extrémním teplotám nebo korozivnímu prostředí.
• Instalaci by měl provádět kvalifikovaný personál v souladu s místními elektrotechnickými předpisy.
• Nepokoušejte se zařízení otevírat ani opravovat sami. Veškerý servis svěřte autorizovanému personálu.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Wendry TCP/IP Network 2-Door Access Control Board
• 1 x CD se softwarem
• 1 x Uživatelská příručka (tento dokument)

Image 3.1: The Wendry TCP/IP Network 2-Door Access Control Board and the accompanying software CD. The board features multiple connection terminals and an Ethernet port for network communication.

4. Konec produktuview

4.1 Klíčové vlastnosti

• Flexible User Rights: Supports multi-user supervision and quick settings for user access.
• Remote & Offline Operation: Enables remote unlocking, offline functionality, and real-time supervision.
• Více způsobů odblokování: Supports card unlocking, password unlocking, and combined card+password unlocking.
• Advanced Alarm Linkage: Provides alarms for invalid card swiping, long door open times, and illegal break-ins. Supports software interface alarms and hardware alarms with expansion boards.
• Vysokorychlostní paměť: Ensures records are not lost during power interruptions.
• Time Attendance Management: Features normal shift and multi-shift time attendance, with exportable and printable reports.
• Anti-Passback & Anti-Tail: Enhanced security features for controlled entry and exit.

4.2 Komponenty

The access control board includes various terminals for power, readers, locks, and sensors. It features an Ethernet port for TCP/IP communication and indicator LEDs for status monitoring.

Image 4.1: The physical dimensions of the access control board are approximately 17.8 cm (7.0 in) in length, 11.8 cm (4.6 in) in width, and 2.0 cm (0.8 in) in height.

Image 4.2: The rear side of the access control board, showing mounting points and circuit board traces.

5. Nastavení

5.1 Instalace hardwaru

1. Montáž: Securely mount the access control board in a protected environment, away from direct sunlight, moisture, and excessive heat.
2. Připojení napájení: Connect a 12VDC, 4-7A power supply to the designated power input terminals on the board. Ensure correct polarity.
3. Připojení čtečky: Connect Wiegand 26/34 bit compatible card readers to the reader input terminals. The board supports up to four readers for two doors (entry/exit for each door).
4. Lock Connection: Connect electric locks to the door lock output terminals.
5. Exit Button/Door Sensor Connection: Connect exit buttons and door contact sensors to their respective terminals.
6. Internetové připojení: Connect an Ethernet cable from your network switch or router to the TCP/IP port on the control board.

5.2 Instalace softwaru

Insert the provided Software CD into your computer's CD-ROM drive. Follow the on-screen instructions to install the access control management software. The software supports SQL databases.

Image 5.1: The software CD labeled 'ACCESS CONTROLLER' is included for installing the management software.

6. Návod k obsluze

6.1 Počáteční konfigurace

1. Launch the installed access control management software.
2. Discover the control board on the network. Configure its IP address if necessary.
3. Add doors and readers to the system within the software interface.

6.2 Správa uživatelů

Use the software to add new users, assign access cards, and set up passwords. Configure flexible user rights and access schedules for each individual.

6.3 Access Control Methods

• Card Unlocking: Present a registered card to the reader.
• Odemknutí heslem: Enter the correct password on the keypad.
• Card + Password Unlocking: Requires both a registered card and a correct password for enhanced security.
• Odemykání na dálku: Doors can be unlocked remotely via the management software.

Image 6.1: The access control board facilitates remote unlocking, offline operation, and real-time supervision, allowing administrators to manage access from a networked computer.

6.4 Time Attendance Management

The software allows for the configuration of normal shifts and multi-shifts for time attendance tracking. Reports can be generated, exported to Excel, and printed for review.

Image 6.2: The system supports normal and multi-shift time attendance management, with data conveniently viewable and exportable as reports from the software interface.

6.5 Propojení alarmu

The system provides various alarm functions:

• Software Alarm: If no expansion board is connected, the software interface will display an alarm and activate the computer's loudspeaker.
• Hardware Alarm: When connected to an expansion board, the system can trigger physical alarm devices.
• Strengthened Alarm: With a strengthened expansion board, enhanced safety alarms can be configured.

Image 6.3: The system supports fire and alarm linkage. Without an expansion board, alarms are software-based. With an expansion board, hardware alarms are possible, and a strengthened expansion board offers enhanced safety alarms.

7. Údržba

• Pravidelný úklid: Keep the control board and readers free from dust and debris. Use a soft, dry cloth for cleaning.
• Aktualizace softwaru: Periodically check for software updates from the manufacturer to ensure optimal performance and security.
• Záloha dat: Regularly back up your access control database to prevent data loss.
• Ochrana proti přerušení napájení: The high-speed memory ensures records are retained during power outages. However, a stable power supply is recommended for continuous operation.

Image 7.1: The system incorporates high-speed memory to protect data and ensure records are not lost in the event of a power interruption, symbolized by the battery icon with a cross and a memory card.

8. Řešení problémů

Pokud narazíte na problémy, podívejte se na následující běžné problémy a jejich řešení:

• Bez napájení: Check power supply connections and ensure the power adapter is functioning correctly.
• Network Connection Failure: Verify Ethernet cable connection, network settings (IP address), and router/switch status.
• Čtečka karet nereaguje: Check reader wiring, ensure it's a compatible Wiegand 26/34 bit reader, and verify reader configuration in the software.
• Dveře se neodemykají: Check lock wiring, power supply to the lock, and ensure the user's access rights are correctly configured.
• Problémy se softwarem: Ensure the software is installed correctly, the database is accessible, and the control board is properly connected and recognized.

V případě přetrvávajících problémů kontaktujte technickou podporu.

9. Specifikace

10. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Wendry customer service. Keep your purchase receipt as proof of purchase.