Ledvance Endura Pro Flood LED Outdoor Projector with Motion Detector

1. Úvod a konecview

The Ledvance Endura Pro Flood LED Outdoor Projector is a highly efficient, wall-mounted sensor floodlight designed for outdoor use. It features a wide beam angle and an innovative optical design, providing uniform surface illumination. Equipped with a motion detector, this projector offers enhanced security and convenience for various outdoor applications.

Key features include an adjustable lamp head for customized lighting, a robust IP55 protection rating for outdoor durability, and an IK05 impact resistance rating. This product is suitable for illuminating parking lots, squares, parks, and other exterior areas.

Figure 1: Ledvance Endura Pro Flood LED Projector packaging.

2. Bezpečnostní informace

Před instalací a provozem si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím.

• Elektrická bezpečnost: Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy. Před instalací, údržbou nebo opravou se ujistěte, že je odpojeno napájení.
• Venkovní použití: This product is designed for outdoor use with an IP55 rating, protecting against dust and low-pressure water jets. Do not submerge the product in water.
• Montáž: Mount the projector securely on a stable surface that can support its weight.
• Světelný zdroj: This luminaire contains a non-replaceable LED light source. Do not attempt to replace the LED module.
• Provozní teplota: Ensure the operating environment is within the specified temperature range to prevent overheating.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• 1 x Ledvance Endura Pro Flood LED Projector with Motion Detector
• Montážní materiál (šrouby, hmoždinky) - (Typically included, but check your specific package)
• Návod k použití

4. Nastavení a instalace

Follow these steps for proper installation of your LED projector:

1. Příprava: Disconnect power at the main circuit breaker before beginning installation. Choose a suitable mounting location on an outdoor wall, ensuring it is stable and provides the desired illumination coverage.
2. Montáž: Use the provided mounting hardware to securely attach the projector to the wall. Mark the drilling points, drill holes, insert wall plugs, and then fasten the projector base.
3. Zapojení: Connect the electrical wires (Live, Neutral, Earth) from your power supply to the corresponding terminals on the projector. Ensure all connections are tight and properly insulated. Refer to the wiring diagram in the product packaging for specific details.
4. Úprava Lamp Hlava: Jáamp head is pivotable. Adjust its angle to direct the light beam to your desired area.

Obrázek 2: Rozměry produktu pro plánování instalace.

5. Návod k obsluze

The Ledvance Endura Pro Flood projector offers four selectable operating modes. These modes are typically set via controls located on the unit, often behind a cover or on the side panel.

Obrázek 3: Přample of sensor and adjustment controls (actual appearance may vary).

5.1. Výběr režimu

Refer to the markings next to the adjustment dials or switches on your specific unit to select one of the following modes:

• Permanent Light: The projector remains continuously illuminated, regardless of motion or ambient light levels.
• Pohotovostní: The projector may operate at a reduced brightness level (e.g., 20%) and switch to full brightness upon motion detection. This mode provides a constant low-level light for ambiance and security.
• Aktivace pohybu: The projector turns on to full brightness only when motion is detected within its sensor range. It will turn off after a set delay if no further motion is detected.
• Od soumraku do úsvitu: The projector automatically turns on at dusk and off at dawn, based on ambient light levels. Motion detection may still be active in this mode, triggering full brightness when needed.

5.2. Sensor Adjustments

Your projector typically includes controls for:

• Time Delay (TIME): Nastavuje, jak dlouho zůstane světlo rozsvícené po detekci pohybu.
• Citlivost (SENS): Adjusts the detection range or sensitivity of the motion sensor.
• Lux Level (LUX): Sets the ambient light threshold at which the sensor becomes active (for dusk-to-dawn or motion modes).

Experiment with these settings to achieve optimal performance for your specific environment.

Figure 4: Motion detection in action, illuminating a path.

6. Údržba

Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho projektoru.

• Čištění: Pravidelně čistěte čočku a okénko snímače měkkým hadříkem.amp cloth to remove dust, dirt, or debris that may obstruct light output or sensor function. Do not use abrasive cleaners or solvents.
• Inspekce: Annually inspect the wiring and mounting hardware for any signs of wear, corrosion, or loosening. Tighten any loose screws and replace damaged components if necessary.
• Žádné díly opravitelné uživatelem: The LED light source is integrated and not user-replaceable. Do not attempt to open the housing or modify the internal components.

7. Řešení problémů

Pokud se s projektorem setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:

Pokud kroky pro řešení potíží problém nevyřeší, obraťte se na zákaznickou podporu s žádostí o další pomoc.

8. Specifikace

9. Záruka a podpora

This Ledvance Endura Pro Flood LED Projector comes with a 10letá záruka, ensuring quality and reliability. For warranty claims or technical support, please retain your proof of purchase and contact your retailer or Ledvance customer service.

For additional information or assistance, please visit the official Ledvance webstránky nebo se obraťte na svého místního prodejce.