Návod k obsluze pasivních reproduktorů Herdio HOS-401W 4" pro vnitřní/venkovní použití

1. Úvod

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Herdio HOS-401W 4-inch Passive Indoor/Outdoor Speakers. Please read this manual thoroughly before using the product and retain it for future reference.

2. Bezpečnostní informace

• Ensure all electrical connections are made by a qualified professional to prevent electrical shock or damage.
• Do not expose speakers to extreme temperatures or direct water submersion, despite their weather-resistant design.
• Mount speakers securely to prevent them from falling and causing injury or damage.
• Use only specified wiring and power sources.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 2 x Herdio HOS-401W Passive Speakers
• 2 x montážní držáky
• 2 x Speaker Wires (16.4 feet / 5 meters)
• Mounting Screws and Knobs
• Návod k obsluze

Figure 3.1: Package contents showing two speakers, speaker wires, and mounting accessories.

4. Nastavení a instalace

4.1 Speaker Overview

Figure 4.1: Internal components of the 2-way passive speaker, highlighting the 1-inch tweeter and 4-inch woofer.

The Herdio HOS-401W speakers are passive, meaning they require an external amplifier for operation. Each speaker features a 1-inch PET dome tweeter and a 4-inch bass woofer for full-range sound reproduction.

4.2 Montáž reproduktorů

The speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 120-degree range of motion and the speaker face can rotate up to 90 degrees.

1. Choose a suitable mounting location (wall, deck, patio, etc.). Ensure the surface is sturdy enough to support the speaker's weight.
2. Připevněte montážní držák na požadovaný povrch pomocí dodaných šroubů.
3. Secure the speaker to the bracket using the included knobs, allowing for angle adjustment.

Figure 4.2: Illustration of securing the mounting bracket to a wall.

Figure 4.3: Swivel bracket flexibility for optimal sound direction.

4.3 Zapojení reproduktorů

Tyto pasivní reproduktory vyžadují připojení k externímu amplifier. Use the provided speaker wires to connect the speakers to your ampživější.

1. Identify the positive (red) and negative (black) terminals on both the speaker and your ampživější.
2. Connect the red wire to the red terminal and the black wire to the black terminal on both the speaker and the ampzáchranář. Zajistěte bezpečné připojení.
3. For a stereo setup, connect one speaker to the left channel output of your amplifier and the other to the right channel output.
4. For daisy-chaining multiple passive speakers (if supported by your amplifier and speaker model), refer to the amplifier's manual for specific instructions.

Figure 4.4: Wiring diagram for connecting passive speakers to an external ampživější.

5. Návod k obsluze

Po správné instalaci a připojení k amplifier, your Herdio HOS-401W speakers are ready for use.

1. Zapnutí: Zapněte si externí amplifier. The speakers will receive power and audio signals from the ampživější.
2. Zdroj zvuku: Select your desired audio source (e.g., Bluetooth, AUX, USB) on your amplifikátor. Pokud váš amplifier has Bluetooth, pair your device with the ampživější.
3. Ovládání hlasitosti: Adjust the volume using the controls on your amplifier or connected audio source.
4. Směr zvuku: Adjust the speaker's angle using the swivel brackets to optimize sound projection for your listening area.

6. Údržba

To ensure longevity and optimal performance of your speakers:

• Čištění: Otřete skříně reproduktorů měkkým hadříkemamp tkanina. Vyhněte se používání agresivních chemikálií nebo abrazivních čisticích prostředků.
• Ochrana proti počasí: While designed for indoor/outdoor use and featuring a weatherproof ABS cabinet, it is recommended to install them in covered areas (e.g., under a patio, covered deck) to extend their lifespan and protect them from direct, prolonged exposure to severe weather conditions.
• Kontrola připojení: Pravidelně kontrolujte všechna kabelová spojení, abyste se ujistili, že jsou bezpečná a bez koroze.

Figure 6.1: The speaker's all-weather resistant coating protects against elements.

7. Řešení problémů

8. Specifikace

Figure 8.1: Product dimensions of the Herdio HOS-401W speaker.

9. Záruka a podpora

Herdio products come with a limited warranty. For specific warranty details, product support, or technical assistance, please refer to the official Herdio website or contact customer service directly. Contact information can typically be found in the product packaging or on the manufacturer's webmísto.

Online podpora: Návštěva www.herdiotech.com pro časté dotazy a další zdroje.