Somfy Soliris Smoove Kit UNO PWh 1818317 Wind/Sun Sensor Instruction Manual

1. Úvod

The Somfy Soliris Smoove Kit UNO PWh 1818317 is an advanced wind and sun sensor system designed to automate the control of your blinds or awnings. This system detects wind speed and sunlight intensity, automatically adjusting your window coverings to protect them from strong winds and optimize indoor climate by managing solar exposure. This manual provides essential information for the safe installation, operation, and maintenance of your device.

Image 1: Somfy Soliris Smoove Kit UNO PWh 1818317 Wind/Sun Sensor. This image shows the main unit of the Somfy Soliris Smoove Kit, which includes the wind and sun sensor components. The device is typically mounted externally to monitor environmental conditions.

2. Bezpečnostní informace

• Před instalací a provozem si pečlivě přečtěte všechny pokyny.
• Instalaci musí provést kvalifikovaný elektrikář v souladu s místními elektrotechnickými předpisy a předpisy.
• Před zahájením jakékoli instalace, údržby nebo opravy odpojte napájení.
• Do not expose the device to extreme temperatures, humidity, or direct water spray beyond its specified operating conditions.
• Ujistěte se, že všechna připojení jsou bezpečná a řádně izolovaná, abyste předešli nebezpečí úrazu elektrickým proudem.
• Uchovávejte obalové materiály mimo dosah dětí.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.

• Somfy Soliris Smoove Kit UNO PWh 1818317 Wind/Sun Sensor Unit
• Montážní materiál (šrouby, kotvy)
• Návod k použití (tento dokument)
• Note: Specific contents may vary slightly. Refer to the product packaging for a complete list.

4. Specifikace

5. Nastavení a instalace

The Somfy Soliris Smoove Kit UNO PWh 1818317 is designed for surface mounting. Professional installation is recommended due to electrical connections.

1. Vyberte místo montáže: Select an outdoor location that provides optimal exposure to wind and sun, free from obstructions. Ensure the location allows for proper cable routing to the control unit.
2. Namontujte senzorovou jednotku: Securely attach the sensor unit to the chosen surface using the provided mounting hardware. Ensure it is level and stable.
3. Elektrické připojení:
   • Before connecting, ensure the main power supply is OFF.
   • Route the electrical cables from the sensor unit to the control box.
   • Connect the sensor's electrical signal output to the corresponding inputs on your Somfy control unit. Refer to your Somfy control unit's manual for specific wiring diagrams.
   • It is recommended to use a deep switch box for the internal connections to accommodate wiring comfortably.
4. Zapnutí a testování: Once all connections are secure, restore power. The system should initiate a self-test. Follow the instructions in your Somfy control unit's manual for initial programming and calibration of the wind and sun thresholds.

6. Návod k obsluze

The Somfy Soliris Smoove Kit UNO PWh 1818317 operates automatically based on detected wind and sun conditions. The sensor continuously monitors the environment and sends electrical signals to your connected Somfy control unit, which then actuates your blinds or awnings.

• Ochrana proti větru: When wind speeds exceed the pre-set threshold (up to +/- 5 m/s), the sensor signals the control unit to retract awnings or raise blinds to protect them from damage.
• Ochrana před sluncem: When sunlight intensity exceeds the pre-set threshold (up to +/- 5,000 lux), the sensor signals the control unit to extend awnings or lower blinds to provide shade and reduce heat gain.
• Adjusting Thresholds: Refer to the manual of your specific Somfy control unit for instructions on how to adjust the wind and sun sensitivity thresholds. These settings allow you to customize the system's response to environmental changes.
• Ruční ovládání: Most Somfy control units allow for manual override of the automatic functions. Consult your control unit's manual for details on temporary or permanent manual operation.

7. Údržba

Regular maintenance ensures optimal performance and longevity of your Somfy Soliris Smoove Kit UNO PWh 1818317.

• Čištění: Periodically clean the sensor unit with a soft, damp cloth to remove dust, dirt, or debris that may obstruct the sensors. Do not use abrasive cleaners or solvents.
• Inspekce: Annually inspect the sensor unit and its mounting for any signs of wear, damage, or loose connections. Ensure the unit is still securely attached.
• překážky: Ensure that no new obstructions (e.g., growing vegetation, new structures) are blocking the sensor's exposure to wind and sun.
• Aktualizace softwaru: If your Somfy control system supports software updates, ensure your system is running the latest firmware for optimal compatibility and performance.

8. Řešení problémů

If you experience issues with your Somfy Soliris Smoove Kit UNO PWh 1818317, consider the following common troubleshooting steps:

Pokud problémy přetrvávají i po provedení těchto kroků, kontaktujte zákaznickou podporu společnosti Somfy nebo kvalifikovaného technika.

9. Záruka a podpora

The Somfy Soliris Smoove Kit UNO PWh 1818317 comes with a 2letá záruka výrobce. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For warranty claims, technical support, or further assistance, please contact Somfy customer service. You may need to provide your product model number (1818317) and proof of purchase.

Oficiální Somfy Webmísto: www.somfy.com

Please note that warranty terms and conditions may vary by region. Refer to the official Somfy warranty documentation for complete details.