Zavedení
Thank you for choosing the Leader Accessories LA-502613 Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Image: Two Leader Accessories bar stools with light grey PU leather seats and chrome bases, positioned at a kitchen island.
Bezpečnostní informace
For your safety and to ensure the longevity of your bar stools, please observe the following:
- Ensure the total weight on the stool does not exceed 200 kg (440 lbs) to maintain stability.
- Always place the stool on a flat and stable surface to prevent tipping.
- Nestůjte na stoličce.
- Keep children away from the stool during assembly.
- Regularly check all screws and connections to ensure they are tight.
Obsah balení
Each set includes the following components. Please verify all parts are present before beginning assembly.
- 2 x Seat with Backrest (PU Leather, Light Grey)
- 2 x plynový zvedací válec
- 2 x Footrest Ring
- 2 x Base Plate (Chrome Steel)
- 2 x Protective Cap for Gas Lift
- Montážní materiál (šrouby, podložky, imbusový klíč)
Nastavení a montáž
Assembly of each bar stool is designed to be quick and straightforward, typically completed in three simple steps.
- Připevněte opěrku nohou k plynovému zvedáku: Remove the protective cap from the top of the gas lift cylinder. Slide the footrest ring onto the gas lift cylinder. Ensure it is securely seated.
- Vložte plynový zvedák do základny: Place the chrome steel base plate on a flat surface. Insert the bottom end of the gas lift cylinder into the central hole of the base plate. The gas lift should fit snugly.
- Připevnění sedadla k plynovému zvedáku: Align the mounting plate under the seat with the top of the gas lift cylinder. Press the seat firmly onto the gas lift. The weight of the user will help secure the connection.
Obrázek: Podrobný view of the gas lift cylinder and the footrest ring, indicating the SGS certification.
Image: Close-up of the bright plating chassis (base) and the footrest, highlighting the design.
Tyto kroky opakujte u druhé barové stoličky.
Návod k obsluze
Nastavení výšky sedadla
The bar stool features an adjustable height mechanism for personalized comfort. To adjust the height:
- Chcete-li zvednout sedadlo: Ve stoje zatáhněte za páku umístěnou pod sedadlem směrem nahoru. Sedadlo se automaticky zvedne. Po dosažení požadované výšky páku uvolněte.
- Pro snížení sedadla: Vseďte a zatáhněte za páku umístěnou pod sedadlem směrem nahoru. Sedadlo se pod vaší vahou spustí dolů. Po dosažení požadované výšky páku uvolněte.
Funkce otáčení
The seat can rotate 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.
Údržba
Správná péče prodlouží životnost a vzhled vašich barových židlí.
- Cleaning the PU Leather Seat:
Image: Close-up texture of the light grey PU leather seat, showing the quilted design.
Otřete povrch PU kůže měkkým hadříkemamp cloth. For stubborn stains, use a mild soap solution and then wipe clean with a dry cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the material.
- Cleaning the Chrome Steel Base:
Wipe the chrome parts with a soft, dry cloth to remove dust and fingerprints. For smudges, use a chrome cleaner or a damp cloth with a small amount of mild detergent, then polish with a dry cloth. Avoid abrasive pads or cleaners that can scratch the chrome finish.
- Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte, aby byla zachována stabilita a bezpečnost.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Stolice se kymácí nebo je nestabilní. | Volné spoje nebo nerovná podlaha. | Ensure all screws are tightened. Place the stool on a flat, even surface. |
| Nastavení výšky nefunguje. | Gas lift cylinder issue or lever malfunction. | Check if the protective cap on the gas lift was fully removed during assembly. Ensure the lever mechanism is not obstructed. If the issue persists, the gas lift may need replacement. |
| Squeaking noise during swivel. | Lack of lubrication in the swivel mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism under the seat. |
Specifikace
Image: Technical drawing illustrating the dimensions of the bar stool, including seat width, depth, backrest height, and adjustable height range.
- Číslo modelu: LA-502613
- Materiál: PU Leather (seat), Chrome Steel (frame, base)
- Barva: Světle šedá
- Overall Dimensions (per stool): 37 cm (D) x 40 cm (W) x 91-112 cm (H)
- Rozměry sedáku: 37 cm (D) x 40 cm (W)
- Výška opěradla: 30 cm
- Nastavitelná výška sedáku: 62-83 cm (approx. 24.4 - 32.7 inches)
- Průměr základny: 38.5 cm
- Weight Capacity (per stool): 200 kg (440 lb)
- Product Weight (per stool): Přibližně 7.25 kg
Informace o záruce
Leader Accessories products are manufactured to high-quality standards. For specific warranty details, please refer to the purchase documentation or contact your retailer. This warranty typically covers manufacturing defects under normal use.
Zákaznická podpora
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Leader Accessories customer service through your original point of purchase or visit the official Leader Accessories webstránky pro možnosti podpory.
Pro více informací můžete navštívit Leader Accessories Store on Amazon.