LEKATO Guitar Looper Pedal M00775 Instruction Manual

1. Konec produktuview

The LEKATO M00775 Guitar Looper Pedal is a compact and intuitive effect pedal designed for guitarists and bassists. It allows for up to 5 minutes of clear loop recording with unlimited overdubbing, providing a versatile tool for practice, composition, and live performance. The pedal features high-quality 24-bit uncompressed audio and a robust aluminum alloy construction.

Image: The LEKATO M00775 Guitar Looper Pedal, a compact and durable device.

2. Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• 1 x LEKATO Looper Pedal
• 1 x USB kabel
• 1 x Uživatelská příručka (tento dokument)

Image: The looper pedal, USB cable, and user manual included in the package. Note: Power adapter is not included.

3. Bezpečnostní informace

• Nevystavujte jednotku dešti ani vlhkosti, abyste předešli riziku požáru nebo úrazu elektrickým proudem.
• Neotevírejte casing. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• Use only a DC 9V power adapter with a center-negative polarity and a minimum of 300mA current output. Incorrect power supply can damage the unit.
• Uchovávejte mimo dosah dětí.

4. Nastavení

4.1 Připojení napájení

The LEKATO M00775 requires a DC 9V power adapter with a center-negative polarity. The current draw is 300mA. Ensure your power adapter meets these specifications to prevent damage to the pedal. The power adapter is not included in the package.

Image: Diagram illustrating the required DC 9V center-negative power polarity for the pedal.

4.2 Audio připojení

Connect your instrument (guitar, bass, etc.) to the INPUT jack on the pedal. Connect the OUTPUT jack of the pedal to your amplifier or audio interface. Use standard 1/4" instrument cables.

4.3 Připojení USB

The USB port is used for connecting the pedal to a computer (Windows/Mac OS) to upload or download WAV loop files. The USB cable provided is for data transfer only and does not supply power to the pedal.

Image: The looper pedal connected to a laptop via its USB port for file převod.

5. Návod k obsluze

The LEKATO M00775 Looper Pedal features a single footswitch for all primary looping functions and a Level knob to adjust playback volume.

5.1 Základní funkce pro cyklování

• Záznam: Press the footswitch once to start recording. The LED indicator will turn red.
• Přehrávání/Overdub: Press the footswitch once again to stop recording and start playback. The LED will turn green. To overdub, press the footswitch once during playback. The LED will flash red.
• Zpět/Znovu: During playback, hold the footswitch for 2 seconds to undo the last overdub. Hold again for 2 seconds to redo.
• Stop: Double-press the footswitch quickly to stop playback. The LED will turn off.
• Vymazat: While stopped, hold the footswitch for 2 seconds to delete the current loop. The LED will flash red rapidly, then turn off.

Image: A visual guide demonstrating the single-button operation for recording, playing, overdubbing, undoing, and stopping on the LEKATO Looper Pedal.

5.2 Level Knob

The 'LEVEL' knob controls the playback volume of your recorded loops. Adjust it to balance the loop volume with your live instrument signal.

5.3 USB File Řízení

Connect the pedal to your computer using the provided USB cable. The pedal will appear as a removable drive. You can then drag and drop WAV files (48kHz, 24-bit) to and from the pedal. This allows for backing up your loops or importing pre-recorded tracks.

Image: The looper pedal connected to a guitar and a laptop, illustrating its use in a musical setup.

6. Údržba

• Pedál čistěte měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky.
• Pedál skladujte v suchém prostředí, mimo dosah extrémních teplot a přímého slunečního záření.
• Pokud se zařízení delší dobu nepoužívá, odpojte jej od napájení.

7. Řešení problémů

• Žádný zvuk: Zkontrolujte všechna kabelová připojení (přístroj ke vstupu, výstup k amp). Ensure the power adapter is correctly connected and meets specifications. Adjust the 'LEVEL' knob.
• Problémy s nahráváním: Ensure the input signal is strong enough. Check if the loop memory is full (though it has unlimited overdubbing, initial recording time is 5 minutes).
• USB Connection Not Recognized: Try a different USB port or cable. Ensure the pedal is powered on when connecting to the computer.
• Nežádoucí hluk: Ensure all cables are properly shielded. Try a different power supply if hum or buzz persists.

8. Specifikace

Image: The LEKATO Looper Pedal, highlighting its low noise and clean sound capabilities.

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact your retailer. You can also visit the official LEKATO webweb pro další pomoc a registraci produktu.

LEKATO is committed to providing quality musical accessories. For any inquiries, please reach out to our customer service team.