1. Konec produktuview
The Xigmatek Venom X RGB is an ATX mid-tower PC case designed for high-performance gaming and workstation builds. It features tempered glass panels for showcasing internal components and integrated RGB lighting for customizable aesthetics. This manual provides instructions for assembly, operation, and maintenance of your PC case.
Obrázek 1: Vnitřní view of the Xigmatek Venom X RGB PC case, highlighting the spacious interior, motherboard mounting area, and drive bays. RGB fans are visible at the front and rear.
2. Bezpečnostní informace
Před instalací nebo provozem tohoto produktu si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést ke zranění osob nebo poškození produktu.
- Před jakoukoli instalací nebo údržbou vždy odpojte napájecí kabel ze zásuvky.
- Nevystavujte pouzdro vlhkosti nebo extrémním teplotám.
- S tvrzenými skleněnými panely zacházejte opatrně, aby nedošlo k jejich rozbití.
- Zajistěte správné uzemnění, abyste zabránili úrazu elektrickým proudem.
- Uchovávejte malé součástky a šrouby mimo dosah dětí.
- Use appropriate tools for installation to avoid damaging components.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny níže uvedené komponenty:
- Xigmatek Venom X RGB ATX Mid-Tower PC Case
- Accessory box (screws, standoffs, cable ties)
- Uživatelská příručka (tento dokument)
4. Nastavení a instalace
Follow these steps to assemble your PC system within the Xigmatek Venom X RGB case.
4.1 Demontáž bočních panelů
Carefully unscrew the thumbscrews on the rear of the case to remove the tempered glass side panel and the steel side panel. Place them on a soft, flat surface to prevent scratches.
4.2 Instalace základní desky
- Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (Extended ATX, ATX, Micro-ATX, Mini-ITX).
- Place your motherboard onto the standoffs, aligning the screw holes.
- Zajistěte základní desku dodanými šrouby.
4.3 Instalace jednotky napájecího zdroje (PSU)
- Position the PSU in the dedicated compartment at the bottom rear of the case.
- Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards.
- Secure the PSU to the case with the provided screws from the rear.
Obrázek 2: Zadní view of the Xigmatek Venom X RGB case, illustrating the power supply mounting bracket at the bottom, seven expansion slots, and the exhaust fan area.
4.4 Instalace úložného disku (HDD/SSD)
The case supports multiple storage drives. Refer to the internal layout for specific drive bay locations.
- 3.5" pevné disky: Install into the drive cages located beneath the PSU shroud.
- 2.5" SSD disky: Mount onto the dedicated SSD trays behind the motherboard tray or within the drive cages.
Obrázek 3: Vnitřní view from the right side of the Xigmatek Venom X RGB case, revealing ample space for cable management and dedicated mounting points for 2.5-inch SSDs behind the motherboard tray.
4.5 Instalace grafické karty a rozšiřující karty
- Odstraňte potřebné kryty rozšiřujících slotů ze zadní strany skříně.
- Vložte grafickou kartu nebo jiné rozšiřující karty do slotů PCIe na základní desce.
- Karty zajistěte šrouby.
4.6 Front Panel I/O and RGB Connections
Connect the front panel cables (USB, audio, power, reset, LED) to the corresponding headers on your motherboard. Connect the RGB fan cables to the integrated RGB controller or directly to your motherboard's RGB header if supported.
5. Návod k obsluze
5.1 Zapnutí
After all components are installed and cables are connected, plug the power cable into the PSU and a wall outlet. Press the power button on the front panel to start your system.
5.2 Ovládání RGB osvětlení
The Xigmatek Venom X RGB case features integrated RGB lighting. Control methods may vary:
- Tlačítko na předním panelu: If available, a dedicated button on the front I/O panel can cycle through various RGB modes and colors.
- Software základní desky: If the RGB controller is connected to a compatible motherboard header, you can control lighting effects via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion).
6. Údržba
Pravidelná údržba pomáhá zajistit optimální výkon a dlouhou životnost komponent vašeho počítače.
6.1 Čištění prachových filtrů
The Xigmatek Venom X RGB case includes removable dust filters to prevent dust buildup. Regularly clean these filters to maintain airflow.
- Locate the dust filters (e.g., top, front, bottom).
- Opatrně vyjměte filtry.
- Clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation).
- Reattach the filters.
Obrázek 4: Nahoře view of the Xigmatek Venom X RGB case, demonstrating the removable magnetic dust filter for easy cleaning and improved airflow maintenance.
6.2 Cleaning Interior
Periodically clean the interior of the case to remove accumulated dust from components.
- Před čištěním odpojte napájení.
- Use compressed air to blow dust out of fans, heatsinks, and other components.
- Wipe down interior surfaces with a microfiber cloth.
7. Řešení problémů
Tato část se zabývá běžnými problémy, se kterými se můžete setkat.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Systém se nezapne. | Uvolněné napájecí konektory, vadný zdroj, nesprávné zapojení předního panelu. | Check all power cables (PSU to wall, PSU to motherboard/components). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| RGB osvětlení nefunguje. | Loose RGB connections, incompatible motherboard header, software issue. | Ensure RGB cables are securely connected to the controller or motherboard. Check motherboard's RGB header compatibility. Update or reinstall RGB control software. |
| Špatné proudění vzduchu/přehřátí. | Dust buildup, incorrect fan orientation, insufficient fans. | Clean dust filters and interior. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if temperatures remain high. |
8. Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | Venom X |
| Číslo modelu | EN41756 |
| Typ pouzdra | Střední věž |
| Kompatibilita základní desky | Rozšířený formát ATX, ATX, Micro-ATX, Mini-ITX |
| Materiál | Legovaná ocel, tvrzené sklo |
| Barva | Černý |
| Rozšiřující sloty | 7 |
| Vnitřní pozice pro disky | 5 (combination of 3.5" HDD and 2.5" SSD) |
| Přední I / O porty | 2 x USB 3.0, Audio In/Out, Power Button, Reset Button, RGB Control Button (if applicable) |
| Způsob chlazení | Air Cooling (supports 120mm fans) |
| Montáž zdroje | Rear, Bottom |
| Vlastnosti produktu | RGB Lighting, Tempered Glass Panels, Removable Dust Filters |
| Hmotnost položky | 7.7 kg |
9. Informace o záruce
The Xigmatek Venom X RGB PC Case comes with a 2letá záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Nevztahuje se na škody způsobené nesprávným použitím, nehodou, úpravou nebo neoprávněnou opravou.
Uschovejte si prosím doklad o koupi pro uplatnění záruky.
10. Zákaznická podpora
For technical assistance, warranty claims, or further inquiries, please contact Xigmatek customer support through their official webna webu nebo u prodejce, kde byl produkt zakoupen.
Official Xigmatek Webmísto: www.xigmatek.com