ULANZI ST-06S Camera Hot Shoe Phone Holder Instruction Manual

1. Úvod

The ULANZI ST-06S is a versatile phone holder designed for photographers and videographers. It allows you to securely mount your smartphone to a camera's hot shoe or a tripod, providing flexible positioning for various shooting scenarios. This manual provides detailed instructions for the proper setup, operation, and care of your ST-06S phone holder.

2. Vlastnosti produktu

• Adjustable Z-Axis Angle: Allows for pitch angle adjustments without a separate ball head.
• Všestranné možnosti montáže: Features a standard 1/4" screw hole and two cold shoe mounts for accessories.
• Enhanced Safety & Ease of Use: Push-and-lock mechanism with thick, non-slip silicone pads and reinforced fixing gear.
• Otočení o 360°: Quickly switch between portrait and landscape modes.
• Compact & Compatible: Lightweight (51g) and compatible with smartphones 2.36 to 3.54 inches wide.

3. Obsah balení

• 1 x ULANZI ST-06S Camera Hot Shoe Phone Holder

4. Pokyny k nastavení

4.1 Attaching to a Camera Hot Shoe

1. Locate the hot shoe mount on your camera.
2. Slide the base of the ULANZI ST-06S into the camera's hot shoe.
3. Tighten the locking knob at the base of the phone holder to secure it firmly in place.

Figure 4.1: Phone holder attached to a DSLR camera.

4.2 Upevnění na stativ nebo monopod

1. Locate the 1/4" screw hole at the bottom of the ULANZI ST-06S.
2. Screw the phone holder onto the 1/4" screw of your tripod, monopod, or selfie stick until secure.

Figure 4.2: Wide compatibility with various mounting options.

4.3 Vložení smartphonu

1. Press the release button on the side of the phone holder to expand the clamp.
2. Carefully place your smartphone between the silicone pads.
3. Release the button to allow the clamp to securely grip your phone. Ensure the phone is centered and held firmly.

Figure 4.3: Close-up of the phone clamp mechanismus.

5. Návod k obsluze

5.1 Adjusting the Z-Axis Angle

The ST-06S features an adjustable Z-axis angle for pitch adjustments. Loosen the knob located below the phone clamp to adjust the tilt angle. Once the desired angle is achieved, tighten the knob firmly to prevent movement.

Obrázek 5.1: Nastavení úhlu náklonu.

5.2 Rotace o 360°

The phone holder can rotate 360 degrees, allowing for quick switching between portrait and landscape orientations. Simply rotate the phone clamp to your preferred orientation.

Figure 5.2: 360-degree rotation for orientation changes.

5.3 Using Cold Shoe Mounts

The ST-06S is equipped with two cold shoe mounts on top of the phone clamp. These can be used to attach external accessories such as microphones or LED lights. Slide your accessory into the cold shoe mount until it clicks into place or is secured by its own locking mechanism.

Obrázek 5.3: Přamples of using cold shoe mounts with accessories.

6. Údržba

To ensure the longevity and optimal performance of your ULANZI ST-06S phone holder, follow these maintenance guidelines:

• Čištění: Wipe the holder with a soft, dry cloth. For stubborn dirt, a slightly damp Lze použít hadřík a ihned osušit. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Skladování: Store the phone holder in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspekce: Periodically check all moving parts and screws for tightness. Ensure the silicone pads are free from debris and damage to maintain a secure grip.

7. Řešení problémů

If you encounter any issues with your ULANZI ST-06S, refer to the following common problems and solutions:

8. Specifikace

9. Záruka a podpora

For information regarding warranty coverage, technical support, or replacement parts, please refer to the official ULANZI webnebo se obraťte přímo na jejich zákaznický servis. Konkrétní záruční podmínky se mohou lišit v závislosti na regionu a prodejci.