Beta 1972/18 Impact Driver User Manual

1. Konec produktuview

The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.

• Bezkomutátorový digitální motor: Provides increased power and efficiency.
• Vysoký točivý moment: Up to 75 Nm for demanding applications.
• Variabilní rychlost: Up to 2100 RPM for versatile drilling and driving.
• LED Front Lighting: Osvětluje pracovní prostor pro lepší viditelnost.
• Ochrana baterie: Triple battery self-protection against overload and cell power differences.

Figure 1.1: The Beta 1972/18 Impact Driver, showcasinjeho kompaktní design a ergonomická rukojeť.

2. Zahrnuté komponenty

Your Beta 1972/18 Impact Driver package includes the following items:

• Beta 1972/18 Impact Driver
• 2 x 5Ah lithium-iontové baterie
• Quick Charger (80 minutes charging time)
• Hard Case for storage and transport
• Belt Clip (right/left mountable)

Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.

3. Nastavení a montáž

3.1 Nabíjení baterie

1. Connect the quick charger to a suitable power outlet.
2. Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
3. Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
4. Po nabití vyjměte baterii z nabíječky.

3.2 Instalace baterie

• Align the charged battery with the base of the impact driver.
• Slide the battery firmly into the tool until it locks securely.
• To remove, press the battery release buttons on the sides and slide the battery out.

3.3 Připevnění spony na opasek

The belt clip can be attached to either the right or left side of the tool for convenient carrying.

1. Locate the screw hole on the side of the tool where you wish to attach the clip.
2. Align the belt clip with the hole and secure it with the provided screw.

4. Návod k obsluze

4.1 Zapnutí/vypnutí a regulace otáček

• To power on the tool, press the trigger switch. The LED front light will illuminate.
• To power off, release the trigger switch.
• The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
• Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.

4.2 Nastavení točivého momentu

The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.

4.3 Vrtání a ražení

1. Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
2. Select the desired speed and torque setting.
3. Umístěte nástroj pevně proti obrobku.
4. Press the trigger to begin drilling or driving. Apply steady, even pressure.
5. For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.

Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.

Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.

5. Údržba

5.1 Čištění

• Před čištěním vždy odpojte baterii.
• Otřete nástroj čistým hadříkemamp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.
• Keep ventilation openings clear of dust and debris. Use compressed air if necessary.

5.2 Péče o baterii a její skladování

• Baterie skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Pro dlouhodobé skladování nabijte baterie přibližně na 50 % kapacity.
• Neskladujte baterie ve vybitém stavu, abyste předešli jejich poškození.

5.3 Obecná údržba

• Regularly inspect the chuck for wear and tear.
• Check the power cord of the charger for any damage.
• Ujistěte se, že všechny šrouby a upevňovací prvky na nástroji jsou pevně utažené.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

The Beta 1972/18 Impact Driver comes with a 3-letá záruka, což zajišťuje klid ohledně jeho kvality a výkonu.

Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.

For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools webUschovejte si účtenku jako doklad o koupi pro účely záruky.

Pro více informací můžete navštívit Beta Brand Page on Amazon.