CATA CI 712 Brass Glass 3 Burner Gas Stove User Manual

1. Důležité bezpečnostní informace

Please read all instructions carefully before using your CATA CI 712 gas stove. Keep this manual for future reference. Failure to follow these instructions could result in fire, explosion, electric shock, or other hazards, causing property damage, personal injury, or death.

• Bezpečnost plynu: Ensure proper ventilation. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. If you smell gas, follow the instructions provided by your gas supplier.
• Elektrická bezpečnost: This appliance uses automatic electric ignition. Ensure the electrical supply is properly grounded and meets local codes. Do not operate the appliance with a damaged cord or plug.
• Nebezpečí popálení: The cooking surface and surrounding areas can become hot during use. Use oven mitts or pot holders. Do not touch hot surfaces.
• Bezpečnost dětí: Keep children away from the appliance during operation. Never allow children to operate the gas stove.
• Instalace: Instalaci musí provést kvalifikovaný technik v souladu se všemi místními předpisy a předpisy.

2. Konec produktuview

The CATA CI 712 is a 3-burner gas stove designed for efficient and reliable cooking. It features a durable tempered glass surface, robust brass burners, and convenient automatic electric ignition.

Obrázek 2.1: Plná view of the CATA CI 712 Brass Glass 3 Burner Gas Stove.

2.1 Komponenty

• Povrch z tvrzeného skla: Provides a sleek look and is easy to clean.
• Brass Burners: Includes two large brass burners and one small brass burner for versatile cooking.
• Enameled Grates: Sturdy grates to support cookware.
• Ovládací knoflíky: Three metallic rotary knobs for precise flame control and automatic ignition.
• Automatic Electric Ignition: For convenient and instant lighting of burners.

Obrázek 2.2: Detail view of a brass burner and enameled grate.

Figure 2.3: Detail of the metallic control knobs on the glass surface.

3. Nastavení a instalace

The CATA CI 712 gas stove is designed as a freestanding cooktop but can also be used as a built-in hob. Professional installation is highly recommended to ensure safety and proper functionality.

3.1 Vybalení

1. Opatrně vyjměte spotřebič z obalu.
2. Inspect for any damage during transit. Do not install if damaged.
3. Ujistěte se, že jsou přítomny všechny součásti uvedené v dodacím listu.

3.2 Umístění

• Place the stove on a stable, level, and heat-resistant surface.
• Zajistěte dostatečný odstup od hořlavých materiálů.
• If using as a built-in hob, the cutout width should be approximately 70.5 cm.

3.3 Připojení plynu

Connect the gas supply line to the appliance inlet. Use appropriate gas-rated connectors and ensure all connections are leak-free. A qualified gas technician must perform this step.

3.4 Elektrické připojení

Plug the appliance into a properly grounded electrical outlet. This connection powers the automatic electric ignition system. Ensure the voltage a frekvence odpovídají požadavkům spotřebiče.

4. Návod k obsluze

Your CATA CI 712 gas stove features easy-to-use metallic knobs for controlling the burners and automatic ignition.

4.1 Zapálení hořáku

1. Umístěte nádobí na požadovaný rošt hořáku.
2. Push down the corresponding control knob and rotate it counter-clockwise to the 'High' flame position. You will hear a clicking sound as the automatic igniter sparks.
3. Once the burner lights, continue to hold the knob down for a few seconds to allow the thermocouple (if present) to heat up and ensure the flame remains lit.
4. Uvolněte knoflík. Pokud plamen zhasne, opakujte kroky 2–3.

4.2 Nastavení plamene

After the burner is lit, you can adjust the flame intensity by rotating the control knob between the 'High' and 'Low' positions. The knobs rotate 360 degrees for precise flame adjustment.

4.3 Vypnutí hořáku

To turn off a burner, rotate the control knob clockwise until it clicks into the 'Off' position.

5. Údržba a čištění

Regular cleaning and maintenance will ensure the longevity and optimal performance of your gas stove.

5.1 Denní čištění

• Před čištěním nechte sporák zcela vychladnout.
• Wipe the tempered glass surface with a soft cloth and a mild detergent or glass cleaner. Avoid abrasive cleaners that can scratch the glass.
• Remove spills immediately to prevent staining.

5.2 Burner and Grate Cleaning

• Remove the enameled grates and burner caps/rings. These can be washed with warm soapy water. For stubborn stains, a non-abrasive scrub pad can be used.
• Ensure all burner parts are completely dry before reassembling to prevent ignition issues.
• Clean the burner ports with a small brush or needle to ensure unobstructed gas flow.

5.3 ovládacích knoflíků

The metallic control knobs can be pulled off for cleaning. Wash them with warm soapy water and dry thoroughly before reattaching.

6. Řešení problémů

If you encounter issues with your CATA CI 712 gas stove, refer to the following common troubleshooting steps:

• Hořák se nezapaluje:
  • Zkontrolujte, zda je zapnutý přívod plynu.
  • Ensure the appliance is plugged in and there is power to the outlet for the electric ignition.
  • Verify that the burner caps and rings are correctly seated and clean.
  • Hold the knob down for a few extra seconds after ignition.
• Uneven flame:
  • Clean the burner ports to remove any food debris or blockages.
  • Ensure the burner caps are correctly positioned.
• Zápach plynu:
  • Immediately turn off all burners and the main gas supply.
  • Otevřete okna pro větrání.
  • Nepoužívejte žádné elektrické spínače nebo spotřebiče.
  • Contact your gas supplier or a qualified technician immediately.

V případě problémů, které se vám nepodaří vyřešit pomocí těchto kroků, kontaktujte prosím zákaznickou podporu.

7. Specifikace

8. Záruka a podpora

Your CATA CI 712 Brass Glass 3 Burner Gas Stove comes with a comprehensive warranty:

• 2letá záruka: From the date of purchase on Micro switch, Spark Plug, Generator, and Jets.
• 5letá záruka: From the date of purchase on Glass and Valves.
• Vyloučení: No warranty on Sabaf Lotus/Enameled Black burners for discoloration, denting, deformation, or chipping/peeling of enameled black coating.

Please retain your purchase receipt and the included warranty card for any warranty claims. For technical support, service, or to inquire about parts, please contact CATA customer service.

Figure 8.1: CATA brand logo.