Zavedení
Thank you for choosing the BRIKSMAX LED Lighting Kit for your LEGO 10255 Assembly Square model. This kit is designed to illuminate your building blocks, bringing your creation to life with vibrant lighting. This manual provides essential information for safe installation, operation, and maintenance of your lighting kit.
Bezpečnostní informace
- Tento výrobek obsahuje malé části a není vhodný pro děti do 3 let z důvodu nebezpečí udušení.
- Handle LED lights and wires with care to prevent damage. Do not bend wires excessively.
- Před zahájením jakékoli instalace nebo údržby se ujistěte, že je odpojen zdroj napájení.
- Use only the specified power sources (battery holder or USB power cable) provided with the kit.
- Avoid exposing the kit to water or extreme temperatures.
Obsah balení
Ověřte prosím, zda jsou všechny níže uvedené komponenty součástí balení:
Obrázek: Overview of the BRIKSMAX LED Lighting Kit components, including various lights, cables, expansion boards, and power options.
| Komponent | Množství |
|---|---|
| Warm White Street Light | 2 |
| 15cm Connecting Cables | 6 |
| Blue Dot Lights | 1 |
| 6-port Expansion Boards | 1 |
| AA Battery Holder (Batteries not included) | 2 |
| Lepicí čtverce | 2 |
| 15cm Warm White Dot Lights | 7 |
| 5cm Connecting Cables | 1 |
| 30cm USB Power Cable | 2 |
| 8-port Expansion Boards | 2 |
| Multiple Function Boards | 1 |
| LEGO PLATE (Random Color) | 8 |
| 30cm Connecting Cables | 4 |
| 15cm Red Dot Lights | 2 |
| White Strip Lights | 8 |
| 30cm Warm White Dot Lights | 1 |
Nastavení a instalace
This lighting kit is designed for integration with your existing LEGO 10255 Assembly Square model (LEGO set not included). Follow the detailed step-by-step instructions provided in the physical manual included with your kit. Careful placement of lights and routing of wires are crucial for optimal appearance and functionality.
- Připravte si svůj model LEGO: Ensure your LEGO 10255 Assembly Square model is fully assembled and accessible for light installation.
- Určete umístění světla: Refer to the instruction manual for specific locations to place dot lights and strip lights within the model.
- Připojení komponent: Use the connecting cables to link the lights to the expansion boards. Ensure connections are secure but not forced.
- Trasovací vodiče: Carefully route wires between LEGO bricks to conceal them as much as possible, avoiding pinching or excessive tension.
- Připojení napájení: Connect the expansion boards to the multiple function board, then connect the power source (battery holder or USB cable).
Video: A demonstration of the BRIKSMAX LED Lighting Kit installed on the LEGO 10255 Assembly Square, showcasing the various illuminated sections and overall effect.
Obrázek: Přední strana view of the LEGO 10255 Assembly Square model, brightly illuminated by the BRIKSMAX LED lighting kit, highlighting the main entrance and street lights.
Obrázek: Boční view of the LEGO 10255 Assembly Square, showing the illuminated bakery section with warm yellow lights and a street lamp.
Image: A different side view of the LEGO 10255 Assembly Square, featuring the illuminated cafe area and the central fountain with blue lighting.
Image: Close-up of the upper floors of the LEGO 10255 Assembly Square, showing interior lighting through the windows.
Image: Detail of the dentist office section within the LEGO 10255 Assembly Square, illuminated to show interior details.
Návod k obsluze
Once the lighting kit is fully installed, you can power it using one of the following methods:
- Napájení baterie: Insert AA batteries (not included) into the battery holder and connect it to the multiple function board.
- Napájení USB: Connect the provided USB power cable to the multiple function board and plug the other end into a compatible USB power source (e.g., power bank, USB wall adapter).
The lights will activate once power is supplied. There are no additional controls for this specific kit beyond connecting/disconnecting the power source.
Údržba
- Čištění: Gently dust the lights and wires with a soft, dry cloth. Do not use liquid cleaners.
- Výměna baterie: If using battery power, replace batteries when lights dim or cease to function. Ensure correct polarity when inserting new batteries.
- Kontrola drátu: Periodically check wires for any signs of wear or damage. If damage is found, discontinue use and contact customer support.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světla se nerozsvítí. | Žádné napájení, uvolněné spojení, vadná součástka. | Check power source (batteries or USB). Ensure all connections are secure. Inspect wires for damage. |
| Some lights are dim or flickering. | Low battery power, loose connection, damaged light. | Replace batteries or try a different USB power source. Check connections. If a specific light is damaged, contact support. |
| Wires are visible or not neatly arranged. | Nesprávné směrování během instalace. | Carefully re-route wires, utilizing gaps between bricks or under plates as shown in the instruction manual. |
If you encounter persistent issues not resolved by the above steps, please contact BRIKSMAX customer support for assistance.
Specifikace
- Číslo modelu: 10255
- Typ zdroje světla: LED
- Zdroj napájení: Battery Powered (AA, not included), Corded Electric (USB)
- Materiál: Plast
- Barva: Warm White (main lighting)
- Hmotnost položky: 0.37 kg
Záruka a podpora
BRIKSMAX provides a 1-letá záruka against manufacturer defects for this product. If you have any difficulties with your product, require technical assistance, or need to claim warranty service, please do not hesitate to contact us via email. Our customer support team is always available to provide assistance.
For further support, visit the official BRIKSMAX store on Amazon: BRIKSMAX Store