EZDIY-FAB JP-M.2+heatsink cooler-1

EZDIY-FAB M.2 NVMe PCIe Adapter with Heatsink

Model: JP-M.2+heatsink cooler-1

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your EZDIY-FAB M.2 NVMe PCIe Adapter with Heatsink. This adapter allows you to add an M.2 NVMe Solid State Drive (SSD) to a desktop PC that may not have a dedicated M.2 slot, utilizing an available PCI Express (PCIe) x16 slot.

Bezpečnostní informace

  • Ensure your computer is powered off and unplugged from the wall outlet before performing any installation.
  • Před manipulací se součástmi se zbavte statické elektřiny dotykem uzemněného kovového předmětu.
  • Handle the adapter and SSD by their edges to avoid touching sensitive electronic components.
  • Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným technikem.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • EZDIY-FAB M.2 NVMe PCIe Adapter Card
  • Hliníkový chladič
  • Thermal Pads (2 pieces)
  • Mounting Screws and Standoffs for M.2 SSD
  • Šroubovák
Contents of the EZDIY-FAB M.2 NVMe PCIe Adapter package, including the adapter card, heatsink, thermal pads, screws, and a screwdriver.
Image: Package contents of the EZDIY-FAB M.2 NVMe PCIe Adapter.

Konec produktuview

The EZDIY-FAB M.2 NVMe PCIe Adapter is designed to provide a high-speed storage solution for desktop computers. It converts an M.2 NVMe SSD into a standard PCIe x16 expansion card, allowing it to be installed in a compatible PCIe slot on your motherboard. The included heatsink helps maintain optimal SSD performance by dissipating heat, preventing thermal throttling during intensive operations.

Shora dolů view of the EZDIY-FAB M.2 NVMe PCIe Adapter with a heatsink installed on an M.2 SSD, which is mounted on the PCIe card.
Image: EZDIY-FAB M.2 NVMe PCIe Adapter with heatsink.

Kompatibilita

This adapter supports M.2 NVMe (PCIe-based) SSDs with an M-Key connector. It is compatible with M.2 SSD sizes 2230, 2242, 2260, and 2280. The adapter is designed for PCI Express x16 slots and is backward compatible with PCIe 4.0, 3.0, and 2.0 standards.

Important: This adapter does NOT support M.2 SATA SSDs (B-Key or B+M Key).

Diagram illustrating the difference between M-Key NVMe SSDs (supported) and B-Key or B+M Key SATA SSDs (not supported) for the adapter.
Image: M.2 NVMe (M-Key) vs. M.2 SATA (B-Key) compatibility.

Nastavení a instalace

Follow these steps to install your M.2 NVMe SSD onto the adapter and then into your desktop PC:

  1. Prepare the M.2 SSD:
    • Identify the correct standoff position on the adapter card for your M.2 SSD size (2230, 2242, 2260, or 2280).
    • Carefully insert the M.2 SSD into the M-Key slot on the adapter card at a slight angle.
    • Gently push down the SSD and secure it with the provided screw into the standoff.
  2. Install the Heatsink:
    • Remove the protective films from both sides of the thermal pads.
    • Place one thermal pad onto the M.2 SSD chip side.
    • Place the aluminum heatsink on top of the thermal pad, ensuring good contact with the SSD.
    • Use the included rubber bands or clips (if provided) to secure the heatsink firmly to the SSD and adapter.
    Explodoval view showing the M.2 NVMe SSD being installed onto the PCIe adapter card, followed by the thermal pads and heatsink assembly.
    Image: M.2 SSD and heatsink installation onto the adapter.
  3. Install the Adapter into PC:
    • With your PC powered off and unplugged, open the computer case.
    • Locate an available PCI Express x16 slot on your motherboard. While it fits in an x16 slot, it operates at x4 speed.
    • Remove the corresponding expansion slot cover from the PC case.
    • Carefully align the adapter card with the PCIe slot and press it firmly until it is fully seated.
    • Secure the adapter card to the PC case with the screw from the expansion slot cover.
    • Close the computer case, plug in the power, and power on your PC.
    The EZDIY-FAB M.2 NVMe PCIe Adapter installed in a PCIe slot on a motherboard inside a desktop computer case.
    Image: Adapter installed in a PCIe slot.

Návod k obsluze

The EZDIY-FAB M.2 NVMe PCIe Adapter is designed for driver-free operation on most modern operating systems, including Windows XP, 7, 8, 10, and 11. Once installed, your system's BIOS/UEFI should recognize the M.2 NVMe SSD connected via the adapter.

  • Počáteční nastavení: For a new SSD, you may need to initialize and format the drive in Disk Management (Windows) or Disk Utility (macOS/Linux) before it appears as usable storage.
  • Spouštěcí disk: If you intend to use the NVMe SSD as a boot drive, ensure your motherboard's BIOS/UEFI supports booting from PCIe NVMe devices and configure the boot order accordingly.

Údržba

The primary maintenance for this adapter involves ensuring proper thermal management for the M.2 NVMe SSD. The included heatsink is crucial for maintaining optimal performance and longevity of your SSD.

  • Heatsink Check: Periodically check that the heatsink is securely attached to the SSD and that the thermal pads are making good contact.
  • Odstranění prachu: Ensure good airflow within your PC case and regularly clean any dust accumulation on the heatsink and surrounding components to prevent overheating.
Graph showing SSD performance over time, comparing performance with and without a thermal solution (heatsink). The line with thermal solution remains stable, while the other drops significantly.
Image: Performance comparison with and without heatsink, demonstrating thermal throttling prevention.

Odstraňování problémů

ProblémMožné řešení
SSD not detected by the system.
  • Ensure the adapter is fully seated in the PCIe slot.
  • Verify the M.2 SSD is correctly installed on the adapter and secured.
  • Check if the SSD is an NVMe (M-Key) type; SATA M.2 SSDs are not supported.
  • Check your motherboard's BIOS/UEFI settings to ensure the PCIe slot is enabled and configured correctly for NVMe devices.
  • For new SSDs, check Disk Management (Windows) or Disk Utility (macOS/Linux) to initialize and format the drive.
Pomalý výkon.
  • Ensure the heatsink is properly installed and making good contact with the SSD to prevent thermal throttling.
  • Verify the PCIe slot is operating at the expected speed (e.g., x4). Some motherboards may share PCIe lanes, affecting performance.
  • Ujistěte se, že máte aktuální operační systém a ovladače.
Nestabilita nebo havárie systému.
  • Re-seat the adapter and SSD to ensure all connections are firm.
  • Check for any bent pins or damage on the adapter or SSD.
  • Ujistěte se, že váš napájecí zdroj (PSU) poskytuje dostatečné napájení všem komponentům.

Specifikace

FunkceDetail
Číslo modeluJP-M.2+heatsink cooler-1
ZnačkaEZDIY-FAB
Kompatibilní typ SSDM.2 NVMe (M-Key) SSDs
Supported M.2 SSD Sizes2230, 2242, 2260, 2280
Rozhraní PCIePCI Express x4 (fits x16 slot)
PCIe CompatibilityPCIe 4.0, 3.0, 2.0
Podpora operačního systémuWindows XP / 7 / 8 / 10 / 11 (Driver-free)
Zahrnuté příslušenstvíHeatsink, Thermal Pads, Screws, Screwdriver
AplikaceDesktop PC M.2 SSD expansion

Záruka a podpora

For warranty information or technical support, please refer to the EZDIY-FAB official webnebo se obraťte na prodejce. Uschovejte si doklad o koupi pro případ reklamace.

Online resources and FAQs may be available on the manufacturer's support pages.

© 2026 EZDIY-FAB. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.