NEDIS ASWI2614BK

Nedis 4-Way Speaker Control Box (ASWI2614BK) User Manual

Model: ASWI2614BK

1. Úvod

Děkuji za nákupasing the Nedis 4-Way Speaker Control Box. This device allows you to connect a single stereo amplifier to up to four pairs of stereo speakers, providing flexible control over your audio setup. You can select individual speaker pairs or play all connected speakers simultaneously. Please read this manual carefully before installation and use to ensure proper operation and to prevent damage.

Bezpečnostní pokyny

  • Ensure all connections are secure and correct before powering on your ampživější.
  • Do not exceed the maximum power handling capacity of 200W per channel.
  • Maintain proper speaker impedance (4-16 Ohm) to prevent damage to your ampživější.
  • Udržujte zařízení mimo dosah vody, vlhkosti a extrémních teplot.
  • Neotevírejte casing; uvnitř nejsou žádné součásti, které by mohl uživatel opravit.

2. Obsah balení

  • Nedis 4-Way Speaker Control Box (ASWI2614BK)
  • Uživatelská příručka

Poznámka: Reproduktorové kabely nejsou součástí balení a je nutné je zakoupit samostatně.

3. Konec produktuview

The Nedis 4-Way Speaker Control Box features a durable aluminum design and allows for easy management of multiple speaker pairs. It is equipped with four individual toggle switches for speaker selection.

Nahoru view of the Nedis 4-Way Speaker Control Box showing '4 Way Speaker Control' and 'Speaker Selection' labels with four toggle switches.

Obrázek 3.1: Nahoře view of the speaker control box, highlighting the speaker selection switches.

Klíčové vlastnosti:

  • Switch between four pairs of speakers or play all simultaneously.
  • Elegant metal finish for durability and aesthetic appeal.
  • Four separate toggle switches for independent control of each speaker pair.
  • Supports maximum cable length of 50 meters.
  • Manual control method for straightforward operation.

4. Nastavení a připojení

Před provedením jakéhokoli připojení se ujistěte, že amplifier and all audio equipment are turned off and unplugged from the power outlet.

Zadní view of the Nedis 4-Way Speaker Control Box showing screw terminals for Amplifier Input and Speaker Outputs 1, 2, 3, and 4, with Left and Right channels clearly marked.

Figure 4.1: Rear panel connections for amplifier input and speaker outputs.

  1. Připojit Ampživější: Connect the speaker output terminals of your stereo ampživější k AMPVSTUP LIFIER screw terminals on the rear of the control box. Ensure correct polarity (+ to + and - to -) for both Left and Right channels.
  2. Připojení reproduktorů: Connect each pair of stereo speakers to the corresponding REPRODUKTOROVÝ VÝSTUP 1, REPRODUKTOROVÝ VÝSTUP 2, REPRODUKTOROVÝ VÝSTUP 3a REPRODUKTOROVÝ VÝSTUP 4 screw terminals. Again, observe correct polarity for Left and Right channels for each speaker pair.
  3. Ověřte připojení: Double-check all connections to ensure they are secure and correctly wired. Loose connections can cause poor sound quality or damage.
  4. Zapnutí: Once all connections are verified, you may plug in and power on your ampživější.

5. Návod k obsluze

The Nedis 4-Way Speaker Control Box is operated manually using the four toggle switches on the front panel.

Přední view of the Nedis 4-Way Speaker Control Box showing four toggle switches in the 'on' position.

Figure 5.1: Front panel with four speaker selection switches.

  • Each switch corresponds to a specific speaker output (Speaker Output 1, 2, 3, or 4).
  • To activate a speaker pair, flip its corresponding switch to the ON pozice.
  • To deactivate a speaker pair, flip its corresponding switch to the VYPNUTO pozice.
  • You can select any combination of speaker pairs, from a single pair to all four pairs simultaneously.
  • Ujistěte se, že vaše amplifier can handle the combined impedance when multiple speaker pairs are active. Refer to your amplifier's manual for details.

6. Údržba

The Nedis 4-Way Speaker Control Box requires minimal maintenance.

  • Čištění: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or chemical sprays.
  • Skladování: Pokud budete jednotku skladovat delší dobu, odpojte všechny kabely a uložte ji na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
  • Inspekce: Pravidelně kontrolujte všechny kabelové spoje, zda nejsou pevně utažené a zda nevykazují známky opotřebení.

7. Řešení problémů

If you encounter issues with your speaker control box, please refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Žádný zvuk z reproduktorů.
  • Speaker pair switch is OFF.
  • Loose or incorrect cable connections.
  • Amplifier is off or input is incorrect.
  • Řečník popř ampzávada na vařiči.
  • Ensure the corresponding speaker switch is ON.
  • Zkontrolujte všechny reproduktory a amplifier connections for correct polarity and tightness.
  • Ověřte ampnapájení a výběr vstupu liferátoru.
  • Test speakers and amplifier directly if possible.
Distorted or low sound.
  • Uvolněné kabelové spoje.
  • Incorrect impedance matching.
  • Přetížení ampživější.
  • Zkontrolujte všechna připojení kabelů.
  • Ensure total speaker impedance is within amplifier's recommended range, especially when multiple pairs are active.
  • Reduce volume or number of active speaker pairs.
Only one channel (Left/Right) plays.
  • Incorrect polarity or loose connection for one channel.
  • Vadný kabel reproduktoru.
  • Verify Left and Right channel connections and polarity for both amplifier input and speaker output.
  • Test with different speaker cables.

8. Specifikace

Číslo modeluASWI2614BK
ZnačkaNEDIS
MateriálHliník
BarvaČerný
Impedance reproduktoru4-16 ohmů
Max Load per Channel200 W
Number of Speaker Outputs4 (stereo pairs)
Kontrolní metodaManual (Toggle Switches)
Technologie připojeníWired (Screw Terminals)
Rozměry (Š x H x V)Cca. 20 cm x 10 cm x 4 cm
Hmotnost550 gramů
Země původuČína

9. Záruka a podpora

This Nedis product comes with a Omezená záruka. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer.

Zákaznická podpora

If you have any questions, require technical assistance, or need to report a problem, please contact Nedis customer support through their official website or your local distributor. Please have your model number (ASWI2614BK) and purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.