Uživatelská příručka vodoměru Badger M35

1. Konec produktuview

This manual provides essential information for the installation, operation, and maintenance of the Badger 3/4 x 3/4 M35 Water Meter with a Direct Reading Gallon Register. This specific unit is a Factory Remanufactured (FRB) meter, designed for accurate measurement of water consumption in gallons.

The M35 meter features a 9-inch lay length, making it suitable for specific installation requirements. It is engineered for reliability and precision in residential or light commercial applications.

2. Součásti a funkce

Figure 2.1: Meter Top View (Víko zavřené)
This image shows the top of the Badger M35 water meter with its protective lid closed. The "BADGER METER" branding and a unique serial number (e.g., 17187747) are visible on the lid, indicating the meter's identification.

Figure 2.2: Meter Top View (Otevřené víko)
With the lid open, the direct reading gallon register is visible. This includes a large dial with a sweep hand for precise readings and a numerical display showing the total accumulated gallons. The meter's model number (M35) and "Gallons" unit are clearly marked.

Figure 2.3: Meter Bottom View
Tento view displays the underside of the water meter, revealing the robust base plate secured by multiple bolts. This construction ensures durability and a secure connection within the plumbing system.

Figure 2.4: Meter Lay Length Measurement
A tape measure is shown alongside the meter, illustrating its 9-inch lay length. This dimension is crucial for proper integration into existing or new plumbing lines, ensuring compatibility with the installation space.

3. Nastavení a instalace

Důležité: Installation of water meters should ideally be performed by a qualified plumber or technician to ensure proper function, compliance with local codes, and to prevent leaks or damage.

3.1 Kontrolní seznam před instalací

• Ensure the meter's size (3/4 x 3/4 inch) and lay length (9 inches) match your plumbing requirements.
• Verify that the meter is free from any visible damage.
• Confirm the availability of necessary tools and sealing materials (e.g., pipe wrenches, thread sealant).
• Locate the appropriate installation point, typically after the main shut-off valve and before any branching lines.

3.2 kroky instalace

1. Uzavření přívodu vody: Turn off the main water supply to the property.
2. Odtokové potrubí: Open faucets to drain water from the pipes, relieving pressure.
3. Příprava konců trubek: Ujistěte se, že konce trubek jsou čisté, bez otřepů a správně zarovnané.
4. Orientace měřicího přístroje: Observe the flow direction arrow on the meter body. Install the meter so that water flows in the indicated direction.
5. Connect the Meter: Apply appropriate thread sealant to the pipe threads. Carefully connect the meter to the plumbing lines, ensuring a tight, leak-free seal. Do not overtighten.
6. Obnovení zásobování vodou: Slowly open the main water supply valve.
7. Zkontrolujte netěsnosti: Inspect all connections for any signs of leaks. Tighten gently if necessary.
8. Čistit vzduch: Open faucets slowly to allow air to escape from the system until water flows smoothly.

4. Operating Instructions: Reading the Meter

The Badger M35 water meter features a direct reading register, making it straightforward to read your water consumption in gallons.

4.1 How to Read the Register

• Otevřete víko: Gently lift the protective lid on top of the meter to expose the register dial.
• Read the Numerical Display: The primary reading is taken from the numerical display, which shows the total accumulated gallons. Read the numbers from left to right.
• Read the Sweep Hand (for precision): For more precise readings, especially for detecting small leaks or short-term usage, observe the sweep hand on the dial. Each full rotation of the sweep hand typically represents a specific volume (e.g., 10 gallons), as indicated on the dial face.
• Record Your Reading: Note down the full numerical reading. For billing purposes, utility companies typically use the full numerical display.

Exampten: If the numerical display shows "0001234", your reading is 1,234 gallons.

5. Údržba

The Badger M35 water meter is designed for long-term, maintenance-free operation. As a sealed unit, it requires no internal user servicing.

5.1 Obecná péče

• Pravidelná prohlídka: Periodically check the meter and its connections for any signs of leaks, corrosion, or physical damage.
• Protection from Freezing: In cold climates, ensure the meter is adequately protected from freezing temperatures, which can cause significant damage. This may involve insulation or draining lines if the meter is in an unheated area.
• Udržujte jasno: Ensure the area around the meter is kept clear of debris or obstructions to allow for easy reading and inspection.
• Čištění: If the meter's lid or display becomes dirty, gently wipe it with a soft, damp tkanina. Vyhněte se používání agresivních chemikálií nebo abrazivních materiálů.

Do not attempt to disassemble the meter, as this will void any potential warranty and may damage the unit.

6. Řešení problémů

This section addresses common issues you might encounter with your water meter. For complex problems, it is recommended to contact a professional plumber or the seller.

7. Specifikace

8. Záruka a podpora

As this is a Factory Remanufactured (FRB) unit, specific warranty terms may vary. Please refer to the original purchase documentation or contact the seller directly for information regarding warranty coverage, returns, or technical support.

For any questions regarding water meters or if you are looking for similar meters not listed, you may contact the seller, MetersandParts, through the platform where the purchase was made.