artika TRK4SUB-N-ON

Artika Subway Bathroom Vanity Light (Model TRK4SUB-N-ON) Instruction Manual

Značka: Artika

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Artika Subway Bathroom Vanity Light, Model TRK4SUB-N-ON. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The Artika Subway Vanity Light features a modern design with premium bubble glass and a brushed nickel finish, providing optimal luminosity for your bathroom. It is designed for wall installation and is dimmable with most LED dimmers.

Artika Subway Bathroom Vanity Light, front view

Obrázek 1: Přední strana view of the Artika Subway Bathroom Vanity Light.

2. Vlastnosti produktu

  • Premium bubble glass
  • Povrchová úprava kartáčovaný nikl
  • Dimmable (Compatible with most LED Dimmers)
  • 2-way installation (Up or Down) - Wall installation only
  • Hardware v ceně
  • Integrovaný LED světelný zdroj

3. Bezpečnostní informace

Always turn off the electrical power at the main circuit breaker or fuse box before beginning installation. Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.

This fixture is designed for indoor use only. Do not install in wet locations. Ensure the mounting surface can support the weight of the fixture.

4. Nastavení a instalace

4.1. Obsah balení

  • Artika Subway Bathroom Vanity Light Fixture
  • Montážní materiál (šrouby, matice, montážní deska)
  • Návod k použití

4.2. Požadované nástroje (nejsou součástí dodávky)

  • Šroubovák
  • Odizolovače drátů
  • Kleště
  • Elektrická páska
  • Ochranné brýle

4.3. Montáž svítidla

  1. Vypněte napájení jističem.
  2. Remove the old fixture (if applicable) and disconnect wiring.
  3. Připevněte montážní desku ke spojovací krabici pomocí dodaných šroubů.
  4. Connect the fixture wires to the house wires: black to black (live), white to white (neutral), and bare copper/green to bare copper/green (ground). Secure connections with wire nuts.
  5. Opatrně zasuňte všechny vodiče do spojovací krabice.
  6. Align the fixture with the mounting plate and secure it with the provided screws. The fixture can be installed for upward or downward light direction.
Artika Subway Bathroom Vanity Light dimensions

Figure 2: Dimensions of the Artika Subway Bathroom Vanity Light, showing length, width, and height.

5. Návod k obsluze

5.1. Zapnutí/vypnutí

Once installed, the light fixture can be turned on or off using your standard wall switch.

5.2 Stmívatelnost

This Artika Subway Vanity Light is designed to be dimmable. For optimal performance, ensure you use an LED-compatible dimmer switch. Using a non-LED compatible dimmer may result in flickering or improper dimming functionality.

Video: Official Artika video showcasing the product development and design philosophy behind their lighting fixtures, including the Subway Vanity Light.

6. Údržba

To maintain the appearance and functionality of your light fixture, follow these guidelines:

  • Čištění: Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
  • Péče o LED: This fixture uses integrated LED components, which are designed for long-lasting performance. There are no bulbs to replace.
  • Inspekce: Pravidelně kontrolujte těsnost všech elektrických spojů a montážních prvků.

7. Řešení problémů

If you experience issues with your Artika Subway Bathroom Vanity Light, refer to the following common troubleshooting steps:

  • Světlo se nerozsvítí:
    • Ensure the power is on at the circuit breaker.
    • Check all wire connections to ensure they are secure.
    • Ověřte, zda je nástěnný vypínač v poloze „ZAPNUTO“.
  • Světlo bliká nebo se ztlumuje nesprávně:
    • Confirm that an LED-compatible dimmer switch is being used.
    • Zkontrolujte, zda nejsou uvolněné vodiče.
    • Ensure the dimmer switch is properly installed and rated for LED lighting.
  • Neobvyklý hluk:
    • Turn off power and re-check all connections. If the noise persists, consult a qualified electrician.

If these steps do not resolve the issue, please contact Artika customer support.

8. Specifikace

SpecifikaceDetail
Značkaartika
Číslo modeluTRK4SUB-N-ON
MateriálLegovaná ocel, sklo
BarvaBrushed Nickel (fixture), Clear (shade)
StylModerní
Forma svítidlaMarnost
Typ pokojeKoupelna
Zdroj napájeníPevně ​​zapojené
Světelný zdrojLED
Počet světelných zdrojů1 (integrated LED strip)
svtage120 voltů
Wattage27 wattů
Jas1750 lumenů
Rozměry položky (D x Š x V)35 cm D x 3 cm Š x 5 cm V
Hmotnost položky8 libry
StmívatelnéAno (kompatibilní s většinou LED stmívačů)

9. Záruka a podpora

9.1. Záruka výrobce

This Artika Subway Bathroom Vanity Light comes with a 3-year limited warranty from the manufacturer, Artika for Living Inc. Please refer to the warranty documentation included with your product for full terms and conditions.

9.2. Zákaznická podpora

For technical assistance, replacement parts, or warranty claims, please contact Artika for Living Inc. customer support. You can find more information and contact details on their official webwebu nebo prostřednictvím jejich stránky v obchodě na Amazonu: Artika Amazon Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.